[v2,3/4] arm64: dts: imx8mq-librem5: Move usdhc clocks assignment to board DT
diff mbox series

Message ID 20201222151347.7886-4-martin.kepplinger@puri.sm
State Accepted
Commit 6a67d8fbee56c2e99cf71bddbd55ab1e39dd682a
Headers show
Series
  • small Librem 5 phone dts updates
Related show

Commit Message

Martin Kepplinger Dec. 22, 2020, 3:13 p.m. UTC
According to commit e045f044e84e ("arm64: dts: imx8mq: Move usdhc clocks
assignment to board DT") add the clocks assignment to imx8mq-librem5.dtsi
too.

Fixes: e045f044e84e ("arm64: dts: imx8mq: Move usdhc clocks assignment to board DT")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Krzysztof Kozlowski Dec. 23, 2020, 9:58 a.m. UTC | #1
On Tue, Dec 22, 2020 at 04:13:46PM +0100, Martin Kepplinger wrote:
> According to commit e045f044e84e ("arm64: dts: imx8mq: Move usdhc clocks
> assignment to board DT") add the clocks assignment to imx8mq-librem5.dtsi
> too.
> 
> Fixes: e045f044e84e ("arm64: dts: imx8mq: Move usdhc clocks assignment to board DT")
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index a60df09d90f7..47e70ba4e4f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1082,6 +1082,8 @@ 
 };
 
 &usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
@@ -1094,6 +1096,8 @@ 
 };
 
 &usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;