[PATCH V2 1/9] arm64: dts: renesas: beacon kit: Configure programmable clocks

From: Adam Ford <aford173@gmail.com>
To: linux-renesas-soc@vger.kernel.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V2 1/9] arm64: dts: renesas: beacon kit: Configure programmable clocks
Date: Thu, 24 Dec 2020 11:04:54 -0600	[thread overview]
Message-ID: <20201224170502.2254683-1-aford173@gmail.com> (raw)

When the board was added, clock drivers were being updated done at
the same time to allow the versaclock driver to properly configure
the modes.  Unfortunately, the updates were not applied to the board
files at the time they should have been, so do it now.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2:  Limit the changes to the versaclocks chips.

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index cc0e7ce8e503..46a3ba895330 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/clk/versaclock.h>
 
 / {
 	backlight_lvds: backlight-lvds {
@@ -347,12 +348,36 @@ versaclock6_bb: clock-controller@6a {
 		#clock-cells = <1>;
 		clocks = <&x304_clk>;
 		clock-names = "xin";
-		/* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */
+
 		assigned-clocks = <&versaclock6_bb 1>,
 				   <&versaclock6_bb 2>,
 				   <&versaclock6_bb 3>,
 				   <&versaclock6_bb 4>;
 		assigned-clock-rates =	<24000000>, <24000000>, <24000000>, <24576000>;
+
+		OUT1 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT2 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT3 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT4 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index e6885d50bb62..ade2f58ad99b 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/versaclock.h>
 
 / {
 	memory@48000000 {
@@ -169,7 +170,32 @@ versaclock5: versaclock_som@6a {
 				   <&versaclock5 2>,
 				   <&versaclock5 3>,
 				   <&versaclock5 4>;
+
 		assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
+
+		OUT1 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT2 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT3 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT4 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
 	};
 };
 
-- 
2.25.1

