[PATCH V2 9/9] arm64: dts: renesas: beacon: Increase sdhi speeds

From: Adam Ford <aford173@gmail.com>
To: linux-renesas-soc@vger.kernel.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V2 9/9] arm64: dts: renesas: beacon: Increase sdhi speeds
Date: Thu, 24 Dec 2020 11:05:02 -0600	[thread overview]
Message-ID: <20201224170502.2254683-9-aford173@gmail.com> (raw)
In-Reply-To: <20201224170502.2254683-1-aford173@gmail.com>

The eMMC can run at hs400 and the WiFi chip can run at sdr104.
Set the respective flags to push the sdhi faster.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2:  New to series

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index b34ffa1e77fa..56bdd80e36d0 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -271,8 +271,9 @@ &scif2 {
 };
 
 &sdhi2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins>;
+	pinctrl-names = "default", "state_uhs";
 	bus-width = <4>;
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_1p8v>;
@@ -281,6 +282,8 @@ &sdhi2 {
 	pm-ignore-notify;
 	keep-power-in-suspend;
 	mmc-pwrseq = <&wlan_pwrseq>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
 	#address-cells = <1>;
 	#size-cells = <0>;
-- 
2.25.1

