[PATCH v2 09/18] ARM: dts: qcom: sdx55: Add QPIC BAM support

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: agross@kernel.org, bjorn.andersson@linaro.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v2 09/18] ARM: dts: qcom: sdx55: Add QPIC BAM support
Date: Tue,  5 Jan 2021 17:56:40 +0530	[thread overview]
Message-ID: <20210105122649.13581-10-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20210105122649.13581-1-manivannan.sadhasivam@linaro.org>

Add qpic_bam node to support QPIC BAM DMA controller on SDX55 platform.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm/boot/dts/qcom-sdx55.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 622a63b0058f..1b9b990ad0a2 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -166,6 +166,18 @@ sdhc_1: sdhci@8804000 {
 			status = "disabled";
 		};
 
+		qpic_bam: dma@1b04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x01b04000 0x1c000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
 		tcsr_mutex_block: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x1f40000 0x20000>;
-- 
2.25.1

