From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: agross@kernel.org, bjorn.andersson@linaro.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH v3 12/18] ARM: dts: qcom: sdx55-mtp: Enable QPIC NAND
Date: Wed, 6 Jan 2021 18:23:16 +0530 [thread overview]
Message-ID: <20210106125322.61840-13-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20210106125322.61840-1-manivannan.sadhasivam@linaro.org>
Enable QPIC NAND on SDX55-MTP board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm/boot/dts/qcom-sdx55-mtp.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
index 177886e168aa..83b9d784423e 100644
--- a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
@@ -50,3 +50,15 @@ &blsp1_uart3 {
&qpic_bam {
status = "ok";
};
+
+&qpic_nand {
+ status = "ok";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ };
+};
--
2.25.1
next prev parent reply other threads:[~2021-01-06 12:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-06 12:53 [PATCH v3 00/18] Devicetree update for SDX55 platform Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 01/18] ARM: dts: qcom: sdx55: Add pincontrol node Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 02/18] ARM: dts: qcom: sdx55: Add reserved memory nodes Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 03/18] dt-bindings: mmc: sdhci-msm: Document the SDX55 compatible Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 04/18] ARM: dts: qcom: sdx55: Add support for SDHCI controller Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 05/18] dt-bindings: arm-smmu: Add binding for Qcom SDX55 SMMU Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 06/18] ARM: dts: qcom: sdx55: Enable ARM SMMU Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 07/18] ARM: dts: qcom: sdx55: Add support for TCSR Mutex Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 08/18] ARM: dts: qcom: sdx55: Add Shared memory manager support Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 09/18] ARM: dts: qcom: sdx55: Add QPIC BAM support Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 10/18] ARM: dts: qcom: sdx55: Add QPIC NAND support Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 11/18] ARM: dts: qcom: sdx55-mtp: Enable BAM DMA Manivannan Sadhasivam
2021-01-06 12:53 ` Manivannan Sadhasivam [this message]
2021-01-06 12:53 ` [PATCH v3 13/18] ARM: dts: qcom: sdx55: Add spmi node Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 14/18] ARM: dts: qcom: sdx55-mtp: Add pm8150b pmic Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 15/18] ARM: dts: qcom: sdx55-mtp: Add pmx55 pmic Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 16/18] ARM: dts: qcom: sdx55: Add rpmpd node Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 17/18] ARM: dts: qcom: Add PMIC pmx55 dts Manivannan Sadhasivam
2021-01-06 12:53 ` [PATCH v3 18/18] ARM: dts: qcom: sdx55-mtp: Add regulator nodes Manivannan Sadhasivam
2021-01-06 16:48 ` [PATCH v3 00/18] Devicetree update for SDX55 platform Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210106125322.61840-13-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).