[4/5] rtlwifi: rtl8192se: fix bool comparison in expressions
diff mbox series

Message ID 20210110121525.2407-5-yashsri421@gmail.com
State Accepted
Commit 33ae4623d544f1b76e0f656fa49e431b4503f23b
Headers show
Series
  • rtlwifi: fix bool comparison in expressions
Related show

Commit Message

Aditya Srivastava Jan. 10, 2021, 12:15 p.m. UTC
There are certain conditional expressions in rtl8192se, where a boolean
variable is compared with true/false, in forms such as (foo == true) or
(false != bar), which does not comply with checkpatch.pl (CHECK:
BOOL_COMPARISON), according to which boolean variables should be
themselves used in the condition, rather than comparing with true/false

Replace all such expressions with the bool variables appropriately

Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Patch
diff mbox series

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
index 47fabce5c235..73a5d8a068fc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
@@ -458,7 +458,7 @@  static u8 _rtl92se_halset_sysclk(struct ieee80211_hw *hw, u8 data)
 	tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
 	bresult = ((tmpvalue & BIT(7)) == (data & BIT(7)));
 
-	if ((data & (BIT(6) | BIT(7))) == false) {
+	if (!(data & (BIT(6) | BIT(7)))) {
 		waitcount = 100;
 		tmpvalue = 0;
 
@@ -1268,7 +1268,7 @@  static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data)
 	tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
 	result = ((tmp & BIT(7)) == (data & BIT(7)));
 
-	if ((data & (BIT(6) | BIT(7))) == false) {
+	if (!(data & (BIT(6) | BIT(7)))) {
 		waitcnt = 100;
 		tmp = 0;