From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: linux-rtc@vger.kernel.org,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 05/17] rtc: mv: remove mv_rtc_alarm_ops
Date: Mon, 11 Jan 2021 00:17:40 +0100 [thread overview]
Message-ID: <20210110231752.1418816-6-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20210110231752.1418816-1-alexandre.belloni@bootlin.com>
Move the alarm callbacks in mv_rtc_ops and clear RTC_FEATURE_ALARM to
signal that alarms are not available instead of having a supplementary
struct rtc_class_ops.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-mv.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
index f8e2ecea1d8d..6c526e2ec56d 100644
--- a/drivers/rtc/rtc-mv.c
+++ b/drivers/rtc/rtc-mv.c
@@ -200,11 +200,6 @@ static irqreturn_t mv_rtc_interrupt(int irq, void *data)
static const struct rtc_class_ops mv_rtc_ops = {
.read_time = mv_rtc_read_time,
.set_time = mv_rtc_set_time,
-};
-
-static const struct rtc_class_ops mv_rtc_alarm_ops = {
- .read_time = mv_rtc_read_time,
- .set_time = mv_rtc_set_time,
.read_alarm = mv_rtc_read_alarm,
.set_alarm = mv_rtc_set_alarm,
.alarm_irq_enable = mv_rtc_alarm_irq_enable,
@@ -268,13 +263,12 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
}
}
- if (pdata->irq >= 0) {
+ if (pdata->irq >= 0)
device_init_wakeup(&pdev->dev, 1);
- pdata->rtc->ops = &mv_rtc_alarm_ops;
- } else {
- pdata->rtc->ops = &mv_rtc_ops;
- }
+ else
+ clear_bit(RTC_FEATURE_ALARM, pdata->rtc->features);
+ pdata->rtc->ops = &mv_rtc_ops;
pdata->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
pdata->rtc->range_max = RTC_TIMESTAMP_END_2099;
--
2.29.2
next prev parent reply other threads:[~2021-01-10 23:19 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-10 23:17 [PATCH 00/17] rtc: constify all rtc_class_ops Alexandre Belloni
2021-01-10 23:17 ` [PATCH 01/17] rtc: introduce features bitfield Alexandre Belloni
2021-01-10 23:17 ` [PATCH 02/17] rtc: pl031: use RTC_FEATURE_ALARM Alexandre Belloni
2021-01-11 22:00 ` Linus Walleij
2021-01-10 23:17 ` [PATCH 03/17] rtc: armada38x: remove armada38x_rtc_ops_noirq Alexandre Belloni
2021-01-10 23:17 ` [PATCH 04/17] rtc: cmos: remove cmos_rtc_ops_no_alarm Alexandre Belloni
2021-04-28 18:49 ` youling257
2021-04-28 20:20 ` Alexandre Belloni
2021-04-28 21:07 ` youling 257
2021-01-10 23:17 ` Alexandre Belloni [this message]
2021-01-10 23:17 ` [PATCH 06/17] rtc: m48t59: remove m48t02_rtc_ops Alexandre Belloni
2021-01-10 23:17 ` [PATCH 07/17] rtc: pcf2127: remove pcf2127_rtc_alrm_ops Alexandre Belloni
2021-01-10 23:17 ` [PATCH 08/17] rtc: pcf85063: remove pcf85063_rtc_ops_alarm Alexandre Belloni
2021-01-10 23:17 ` [PATCH 09/17] rtc: rx8010: drop a struct rtc_class_ops Alexandre Belloni
2021-01-10 23:17 ` [PATCH 10/17] rtc: pcf85363: " Alexandre Belloni
2021-01-10 23:17 ` [PATCH 11/17] rtc: m41t80: constify m41t80_rtc_ops Alexandre Belloni
2021-01-10 23:17 ` [PATCH 12/17] rtc: opal: constify opal_rtc_ops Alexandre Belloni
2021-01-10 23:17 ` [PATCH 13/17] rtc: rv3028: constify rv3028_rtc_ops Alexandre Belloni
2021-01-10 23:17 ` [PATCH 14/17] rtc: rv3029: constify rv3029_rtc_ops Alexandre Belloni
2021-01-10 23:17 ` [PATCH 15/17] rtc: rv3032: constify rv3032_rtc_ops Alexandre Belloni
2021-01-10 23:17 ` [PATCH 16/17] rtc: rv8803: constify rv8803_rtc_ops Alexandre Belloni
2021-01-10 23:17 ` [PATCH 17/17] rtc: tps65910: remove tps65910_rtc_ops_noirq Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210110231752.1418816-6-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=a.zummo@towertech.it \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).