From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
Mark Brown <broonie@kernel.org>, Wolfram Sang <wsa@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Andy Gross <agross@kernel.org>,
Matthias Kaehlcke <mka@chromium.org>,
Douglas Anderson <dianders@chromium.org>,
Sumit Semwal <sumit.semwal@linaro.org>,
Amit Pundir <amit.pundir@linaro.org>,
linux-spi@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 7/7] arm64: dts: qcom: sdm845: enable dma for spi
Date: Mon, 11 Jan 2021 20:46:51 +0530 [thread overview]
Message-ID: <20210111151651.1616813-8-vkoul@kernel.org> (raw)
In-Reply-To: <20210111151651.1616813-1-vkoul@kernel.org>
Add dmas property for spi@880000 and pinconf setting so that we can use
dma for this spi device. Also, add iommu properties for qup and spi.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 11 +++++++++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 7cc236575ee2..0653468f26ce 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -418,6 +418,10 @@ &gcc {
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
};
+&gpi_dma0 {
+ status = "okay";
+};
+
&gpu {
zap-shader {
memory-region = <&gpu_mem>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index c9a127bbd606..bd9952f54721 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/clock/qcom,lpass-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1183,6 +1184,9 @@ spi0: spi@880000 {
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -2622,6 +2626,13 @@ pinmux {
"gpio2", "gpio3";
function = "qup0";
};
+
+ config {
+ pins = "gpio0", "gpio1",
+ "gpio2", "gpio3";
+ drive-strength = <6>;
+ bias-disable;
+ };
};
qup_spi1_default: qup-spi1-default {
--
2.26.2
next prev parent reply other threads:[~2021-01-11 15:18 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-11 15:16 [PATCH 0/7] Add and enable GPI DMA users Vinod Koul
2021-01-11 15:16 ` [PATCH 1/7] soc: qcom: geni: move GENI_IF_DISABLE_RO to common header Vinod Koul
2021-01-11 15:31 ` Bjorn Andersson
2021-01-11 15:16 ` [PATCH 2/7] soc: qcom: geni: move struct geni_wrapper to header Vinod Koul
2021-01-11 15:34 ` Bjorn Andersson
2021-01-11 17:43 ` Vinod Koul
2021-01-11 18:51 ` Bjorn Andersson
2021-01-11 15:16 ` [PATCH 3/7] soc: qcom: geni: Add support for gpi dma Vinod Koul
2021-01-11 15:40 ` Bjorn Andersson
2021-01-11 17:22 ` Vinod Koul
2021-01-13 0:01 ` Doug Anderson
2021-01-13 3:22 ` Vinod Koul
2021-01-11 15:16 ` [PATCH 4/7] spi: spi-geni-qcom: Add support for GPI dma Vinod Koul
2021-01-11 16:35 ` Mark Brown
2021-06-16 8:50 ` Vinod Koul
2021-06-16 11:35 ` Mark Brown
2021-06-16 12:02 ` Vinod Koul
2021-06-17 6:20 ` Vinod Koul
2021-01-11 17:19 ` Bjorn Andersson
2021-01-12 7:31 ` Lukas Wunner
2021-01-13 0:01 ` Doug Anderson
2021-01-13 3:24 ` Vinod Koul
2021-02-04 21:34 ` Dmitry Baryshkov
2021-01-11 15:16 ` [PATCH 5/7] i2c: qcom-geni: Add support for GPI DMA Vinod Koul
2021-01-11 18:14 ` Bjorn Andersson
2021-01-12 5:50 ` Vinod Koul
2021-01-11 15:16 ` [PATCH 6/7] arm64: dts: qcom: sdm845: Add gpi dma node Vinod Koul
2021-01-11 18:23 ` Bjorn Andersson
2021-01-12 4:21 ` Vinod Koul
2021-01-11 15:16 ` Vinod Koul [this message]
2021-01-11 16:04 ` [PATCH 7/7] arm64: dts: qcom: sdm845: enable dma for spi Konrad Dybcio
2021-01-11 17:46 ` Vinod Koul
2021-01-11 20:45 ` Konrad Dybcio
2021-01-12 4:19 ` Vinod Koul
2021-01-11 16:47 ` Doug Anderson
2021-01-11 17:56 ` Vinod Koul
2021-01-13 0:01 ` [PATCH 0/7] Add and enable GPI DMA users Doug Anderson
2021-01-13 3:03 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210111151651.1616813-8-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=amit.pundir@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=dianders@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mka@chromium.org \
--cc=sumit.semwal@linaro.org \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).