[v5,5/6] regulator: pf8x00: use linear range for buck 1-6
diff mbox series

Message ID 20210114174714.122561-6-adrien.grassein@gmail.com
State Accepted
Commit 35a93349932e0e04c284f8a4954f3d1236c97d85
Headers show
Series
  • Fix issues on pf8x00 driver
Related show

Commit Message

Adrien Grassein Jan. 14, 2021, 5:47 p.m. UTC
Use a linear range to describe the voltages of the
bucks 1-6 instead of listing it one by one (via a macro)

Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
---
 drivers/regulator/pf8x00-regulator.c | 83 +++++++++++++++++-----------
 1 file changed, 51 insertions(+), 32 deletions(-)

Patch
diff mbox series

diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
index 0c0f643b9c60..866162fddd07 100644
--- a/drivers/regulator/pf8x00-regulator.c
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -154,35 +154,11 @@  static const unsigned int pf8x00_sw_current_table[] = {
 	2100000, 2600000, 3000000, 4500000,
 };
 
-#define SWV(i)		(6250 * i + 400000)
-#define SWV_LINE(i)	SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \
-			SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7)
-
 /* Output: 0.4V to 1.8V */
-static const int pf8x00_sw1_to_6_voltages[] = {
-	SWV_LINE(0),
-	SWV_LINE(1),
-	SWV_LINE(2),
-	SWV_LINE(3),
-	SWV_LINE(4),
-	SWV_LINE(5),
-	SWV_LINE(6),
-	SWV_LINE(7),
-	SWV_LINE(8),
-	SWV_LINE(9),
-	SWV_LINE(10),
-	SWV_LINE(11),
-	SWV_LINE(12),
-	SWV_LINE(13),
-	SWV_LINE(14),
-	SWV_LINE(15),
-	SWV_LINE(16),
-	SWV_LINE(17),
-	SWV_LINE(18),
-	SWV_LINE(19),
-	SWV_LINE(20),
-	SWV_LINE(21),
-	1500000, 1800000,
+#define PF8XOO_SW1_6_VOLTAGE_NUM 0xB2
+static const struct linear_range pf8x00_sw1_to_6_voltages[] = {
+	REGULATOR_LINEAR_RANGE(400000, 0x00, 0xB0, 6250),
+	REGULATOR_LINEAR_RANGE(1800000, 0xB1, 0xB1, 0),
 };
 
 /* Output: 1.0V to 4.1V */
@@ -296,7 +272,19 @@  static const struct regulator_ops pf8x00_ldo_ops = {
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };
 
-static const struct regulator_ops pf8x00_buck_ops = {
+
+static const struct regulator_ops pf8x00_buck1_6_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.get_current_limit = regulator_get_current_limit_regmap,
+	.set_current_limit = regulator_set_current_limit_regmap,
+};
+
+static const struct regulator_ops pf8x00_buck7_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -345,11 +333,41 @@  static const struct regulator_ops pf8x00_vsnvs_ops = {
 			.of_match = _name,			\
 			.regulators_node = "regulators",	\
 			.of_parse_cb = pf8x00_of_parse_cb,	\
-			.n_voltages = ARRAY_SIZE(voltages),	\
-			.ops = &pf8x00_buck_ops,		\
+			.n_voltages = PF8XOO_SW1_6_VOLTAGE_NUM,	\
+			.ops = &pf8x00_buck1_6_ops,		\
 			.type = REGULATOR_VOLTAGE,		\
 			.id = PF8X00_BUCK ## _id,		\
 			.owner = THIS_MODULE,			\
+			.linear_ranges = pf8x00_sw1_to_6_voltages, \
+			.n_linear_ranges = \
+				ARRAY_SIZE(pf8x00_sw1_to_6_voltages), \
+			.vsel_reg = (base) + SW_RUN_VOLT,	\
+			.vsel_mask = 0xff,			\
+			.curr_table = pf8x00_sw_current_table, \
+			.n_current_limits = \
+				ARRAY_SIZE(pf8x00_sw_current_table), \
+			.csel_reg = (base) + SW_CONFIG2,	\
+			.csel_mask = PF8X00_SWXILIM_MASK,	\
+			.enable_reg = (base) + SW_MODE1,	\
+			.enable_val = 0x3,			\
+			.disable_val = 0x0,			\
+			.enable_mask = 0x3,			\
+			.enable_time = 500,			\
+		},						\
+	}
+
+#define PF8X00BUCK7(_name, base, voltages)			\
+	[PF8X00_BUCK7] = {				\
+		.desc = {					\
+			.name = _name,				\
+			.of_match = _name,			\
+			.regulators_node = "regulators",	\
+			.of_parse_cb = pf8x00_of_parse_cb,	\
+			.n_voltages = ARRAY_SIZE(voltages),	\
+			.ops = &pf8x00_buck7_ops,		\
+			.type = REGULATOR_VOLTAGE,		\
+			.id = PF8X00_BUCK7,		\
+			.owner = THIS_MODULE,			\
 			.volt_table = voltages,			\
 			.vsel_reg = (base) + SW_RUN_VOLT,	\
 			.vsel_mask = 0xff,			\
@@ -366,6 +384,7 @@  static const struct regulator_ops pf8x00_vsnvs_ops = {
 		},						\
 	}
 
+
 #define PF8X00VSNVS(_name, base, voltages)			\
 	[PF8X00_VSNVS] = {					\
 		.desc = {					\
@@ -394,7 +413,7 @@  static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = {
 	PF8X00BUCK(4, "buck4", PF8X00_SW_BASE(PF8X00_BUCK4), pf8x00_sw1_to_6_voltages),
 	PF8X00BUCK(5, "buck5", PF8X00_SW_BASE(PF8X00_BUCK5), pf8x00_sw1_to_6_voltages),
 	PF8X00BUCK(6, "buck6", PF8X00_SW_BASE(PF8X00_BUCK6), pf8x00_sw1_to_6_voltages),
-	PF8X00BUCK(7, "buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
+	PF8X00BUCK7("buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
 	PF8X00VSNVS("vsnvs", PF8X00_VSNVS_CONFIG1, pf8x00_vsnvs_voltages),
 };