From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 4.9 22/25] wan: ds26522: select CONFIG_BITREVERSE
Date: Fri, 15 Jan 2021 13:27:53 +0100 [thread overview]
Message-ID: <20210115121957.783492596@linuxfoundation.org> (raw)
In-Reply-To: <20210115121956.679956165@linuxfoundation.org>
From: Arnd Bergmann <arnd@arndb.de>
commit 69931e11288520c250152180ecf9b6ac5e6e40ed upstream.
Without this, the driver runs into a link failure
arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe':
slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write':
slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table'
Fixes: c37d4a0085c5 ("Maxim/driver: Add driver for maxim ds26522")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wan/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -295,6 +295,7 @@ config SLIC_DS26522
tristate "Slic Maxim ds26522 card support"
depends on SPI
depends on FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
+ select BITREVERSE
help
This module initializes and configures the slic maxim card
in T1 or E1 mode.
next prev parent reply other threads:[~2021-01-15 12:31 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-15 12:27 [PATCH 4.9 00/25] 4.9.252-rc1 review Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 01/25] target: bounds check XCOPY segment descriptor list Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 02/25] target: simplify XCOPY wwn->se_dev lookup helper Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 03/25] target: use XCOPY segment descriptor CSCD IDs Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 04/25] xcopy: loop over devices using idr helper Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 05/25] scsi: target: Fix XCOPY NAA identifier lookup Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 06/25] target: add XCOPY target/segment desc sense codes Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 07/25] powerpc: Fix incorrect stw{, ux, u, x} instructions in __set_pte_at Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 08/25] net: ip: always refragment ip defragmented packets Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 09/25] net: fix pmtu check in nopmtudisc mode Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 10/25] vmlinux.lds.h: Add PGO and AutoFDO input sections Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 11/25] drm/i915: Fix mismatch between misplaced vma check and vma insert Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 12/25] ubifs: wbuf: Dont leak kernel memory to flash Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 13/25] spi: pxa2xx: Fix use-after-free on unbind Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 14/25] ARM: OMAP2+: omap_device: fix idling of devices during probe Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 15/25] cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get() Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 16/25] dmaengine: xilinx_dma: check dma_async_device_register return value Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 17/25] dmaengine: xilinx_dma: fix mixed_enum_type coverity warning Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 18/25] wil6210: select CONFIG_CRC32 Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 19/25] block: rsxx: " Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 20/25] iommu/intel: Fix memleak in intel_irq_remapping_alloc Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 21/25] net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups Greg Kroah-Hartman
2021-01-15 12:27 ` Greg Kroah-Hartman [this message]
2021-01-15 12:27 ` [PATCH 4.9 23/25] KVM: arm64: Dont access PMCR_EL0 when no PMU is available Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 24/25] block: fix use-after-free in disk_part_iter_next Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.9 25/25] net: drop bogus skb with CHECKSUM_PARTIAL and offset beyond end of trimmed packet Greg Kroah-Hartman
2021-01-15 21:14 ` [PATCH 4.9 00/25] 4.9.252-rc1 review Shuah Khan
2021-01-15 21:18 ` Guenter Roeck
2021-01-16 7:41 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210115121957.783492596@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).