[v7,08/11] input: raspberrypi-ts: Release firmware handle when not needed
diff mbox series

Message ID 20210118123244.13669-9-nsaenzjulienne@suse.de
State New, archived
Headers show
Series
  • Raspberry Pi PoE HAT fan support
Related show

Commit Message

Nicolas Saenz Julienne Jan. 18, 2021, 12:32 p.m. UTC
There is no use for the firmware interface after getting the touch
buffer address, so release it.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

---
Changes since v5:
 - Correct commit message

Changes since v3:
 - Release firmware handle in probe function

Changes since v2:
 - Use devm_rpi_firmware_get(), instead of remove function

 drivers/input/touchscreen/raspberrypi-ts.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Patch
diff mbox series

diff --git a/drivers/input/touchscreen/raspberrypi-ts.c b/drivers/input/touchscreen/raspberrypi-ts.c
index ef6aaed217cf..5000f5fd9ec3 100644
--- a/drivers/input/touchscreen/raspberrypi-ts.c
+++ b/drivers/input/touchscreen/raspberrypi-ts.c
@@ -160,7 +160,7 @@  static int rpi_ts_probe(struct platform_device *pdev)
 	touchbuf = (u32)ts->fw_regs_phys;
 	error = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF,
 				      &touchbuf, sizeof(touchbuf));
-
+	rpi_firmware_put(fw);
 	if (error || touchbuf != 0) {
 		dev_warn(dev, "Failed to set touchbuf, %d\n", error);
 		return error;