From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
<robh@kernel.org>, <jonathanh@nvidia.com>, <kishon@ti.com>,
<mturquette@baylibre.com>, <sboyd@kernel.org>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<nkristam@nvidia.com>, <linux-clk@vger.kernel.org>,
JC Kuo <jckuo@nvidia.com>, Thierry Reding <treding@nvidia.com>
Subject: [PATCH v7 06/14] phy: tegra: xusb: Add sleepwalk and suspend/resume
Date: Wed, 20 Jan 2021 15:34:06 +0800 [thread overview]
Message-ID: <20210120073414.69208-7-jckuo@nvidia.com> (raw)
In-Reply-To: <20210120073414.69208-1-jckuo@nvidia.com>
This commit adds sleepwalk/wake and suspend/resume interfaces
to Tegra XUSB PHY driver.
Tegra XUSB host controller driver makes use of sleepwalk functions
to enable/disable sleepwalk circuit which is in always-on partition
and can respond to USB resume signals when controller is not powered.
Sleepwalk can be enabled/disabled for any USB UPHY individually.
- tegra_xusb_padctl_enable_phy_sleepwalk()
- tegra_xusb_padctl_disable_phy_sleepwalk()
Tegra XUSB host controller driver makes use of wake functions to
enable/disable/query wake circuit which is in always-on partition
can wake system up when USB resume happens.
Wake circuit can be enabled/disabled for any USB PHY individually.
- tegra_xusb_padctl_enable_phy_wake()
- tegra_xusb_padctl_disable_phy_wake()
- tegra_xusb_padctl_remote_wake_detected()
This commit also adds two system suspend stubs that can be used to
save and restore XUSB PADCTL context during system suspend and
resume.
- tegra_xusb_padctl_suspend_noirq()
- tegra_xusb_padctl_resume_noirq()
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
v7:
add 'Acked-by: Thierry Reding <treding@nvidia.com>'
v6:
no change
v5:
no change
v4:
move sleepwalk/wake stubs from 'struct tegra_xusb_padctl_ops' to
'struct tegra_xusb_lane_ops'
v3:
commit message improvement, no change in code
drivers/phy/tegra/xusb.c | 82 ++++++++++++++++++++++++++++++++++
drivers/phy/tegra/xusb.h | 8 ++++
include/linux/phy/tegra/xusb.h | 10 ++++-
3 files changed, 99 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index a34d304677bb..0aadac678191 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -1273,10 +1273,36 @@ static int tegra_xusb_padctl_remove(struct platform_device *pdev)
return err;
}
+static int tegra_xusb_padctl_suspend_noirq(struct device *dev)
+{
+ struct tegra_xusb_padctl *padctl = dev_get_drvdata(dev);
+
+ if (padctl->soc && padctl->soc->ops && padctl->soc->ops->suspend_noirq)
+ return padctl->soc->ops->suspend_noirq(padctl);
+
+ return 0;
+}
+
+static int tegra_xusb_padctl_resume_noirq(struct device *dev)
+{
+ struct tegra_xusb_padctl *padctl = dev_get_drvdata(dev);
+
+ if (padctl->soc && padctl->soc->ops && padctl->soc->ops->resume_noirq)
+ return padctl->soc->ops->resume_noirq(padctl);
+
+ return 0;
+}
+
+static const struct dev_pm_ops tegra_xusb_padctl_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_xusb_padctl_suspend_noirq,
+ tegra_xusb_padctl_resume_noirq)
+};
+
static struct platform_driver tegra_xusb_padctl_driver = {
.driver = {
.name = "tegra-xusb-padctl",
.of_match_table = tegra_xusb_padctl_of_match,
+ .pm = &tegra_xusb_padctl_pm_ops,
},
.probe = tegra_xusb_padctl_probe,
.remove = tegra_xusb_padctl_remove,
@@ -1343,6 +1369,62 @@ int tegra_xusb_padctl_hsic_set_idle(struct tegra_xusb_padctl *padctl,
}
EXPORT_SYMBOL_GPL(tegra_xusb_padctl_hsic_set_idle);
+int tegra_xusb_padctl_enable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy,
+ enum usb_device_speed speed)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+ if (lane->pad->ops->enable_phy_sleepwalk)
+ return lane->pad->ops->enable_phy_sleepwalk(lane, speed);
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_enable_phy_sleepwalk);
+
+int tegra_xusb_padctl_disable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+ if (lane->pad->ops->disable_phy_sleepwalk)
+ return lane->pad->ops->disable_phy_sleepwalk(lane);
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_disable_phy_sleepwalk);
+
+int tegra_xusb_padctl_enable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+ if (lane->pad->ops->enable_phy_wake)
+ return lane->pad->ops->enable_phy_wake(lane);
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_enable_phy_wake);
+
+int tegra_xusb_padctl_disable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+ if (lane->pad->ops->disable_phy_wake)
+ return lane->pad->ops->disable_phy_wake(lane);
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_disable_phy_wake);
+
+bool tegra_xusb_padctl_remote_wake_detected(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+ if (lane->pad->ops->remote_wake_detected)
+ return lane->pad->ops->remote_wake_detected(lane);
+
+ return false;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_remote_wake_detected);
+
int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
unsigned int port, bool enable)
{
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index e789d5ff4eb8..034f7a2c28d6 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -11,6 +11,7 @@
#include <linux/mutex.h>
#include <linux/workqueue.h>
+#include <linux/usb/ch9.h>
#include <linux/usb/otg.h>
#include <linux/usb/role.h>
@@ -132,6 +133,11 @@ struct tegra_xusb_lane_ops {
void (*remove)(struct tegra_xusb_lane *lane);
void (*iddq_enable)(struct tegra_xusb_lane *lane);
void (*iddq_disable)(struct tegra_xusb_lane *lane);
+ int (*enable_phy_sleepwalk)(struct tegra_xusb_lane *lane, enum usb_device_speed speed);
+ int (*disable_phy_sleepwalk)(struct tegra_xusb_lane *lane);
+ int (*enable_phy_wake)(struct tegra_xusb_lane *lane);
+ int (*disable_phy_wake)(struct tegra_xusb_lane *lane);
+ bool (*remote_wake_detected)(struct tegra_xusb_lane *lane);
};
bool tegra_xusb_lane_check(struct tegra_xusb_lane *lane, const char *function);
@@ -396,6 +402,8 @@ struct tegra_xusb_padctl_ops {
const struct tegra_xusb_padctl_soc *soc);
void (*remove)(struct tegra_xusb_padctl *padctl);
+ int (*suspend_noirq)(struct tegra_xusb_padctl *padctl);
+ int (*resume_noirq)(struct tegra_xusb_padctl *padctl);
int (*usb3_save_context)(struct tegra_xusb_padctl *padctl,
unsigned int index);
int (*hsic_set_idle)(struct tegra_xusb_padctl *padctl,
diff --git a/include/linux/phy/tegra/xusb.h b/include/linux/phy/tegra/xusb.h
index 71d956935405..3a35e74cdc61 100644
--- a/include/linux/phy/tegra/xusb.h
+++ b/include/linux/phy/tegra/xusb.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2016-2020, NVIDIA CORPORATION. All rights reserved.
*/
#ifndef PHY_TEGRA_XUSB_H
@@ -8,6 +8,7 @@
struct tegra_xusb_padctl;
struct device;
+enum usb_device_speed;
struct tegra_xusb_padctl *tegra_xusb_padctl_get(struct device *dev);
void tegra_xusb_padctl_put(struct tegra_xusb_padctl *padctl);
@@ -23,4 +24,11 @@ int tegra_xusb_padctl_set_vbus_override(struct tegra_xusb_padctl *padctl,
int tegra_phy_xusb_utmi_port_reset(struct phy *phy);
int tegra_xusb_padctl_get_usb3_companion(struct tegra_xusb_padctl *padctl,
unsigned int port);
+int tegra_xusb_padctl_enable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy,
+ enum usb_device_speed speed);
+int tegra_xusb_padctl_disable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy);
+int tegra_xusb_padctl_enable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy);
+int tegra_xusb_padctl_disable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy);
+bool tegra_xusb_padctl_remote_wake_detected(struct tegra_xusb_padctl *padctl, struct phy *phy);
+
#endif /* PHY_TEGRA_XUSB_H */
--
2.25.1
next prev parent reply other threads:[~2021-01-20 7:41 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-20 7:34 [PATCH v7 00/14] Tegra XHCI controller ELPG support JC Kuo
2021-01-20 7:34 ` [PATCH v7 01/14] clk: tegra: Add PLLE HW power sequencer control JC Kuo
2021-02-08 19:28 ` Stephen Boyd
2021-01-20 7:34 ` [PATCH v7 02/14] clk: tegra: Don't enable PLLE HW sequencer at init JC Kuo
2021-02-08 19:28 ` Stephen Boyd
2021-01-20 7:34 ` [PATCH v7 03/14] phy: tegra: xusb: Move usb3 port init for Tegra210 JC Kuo
2021-01-20 7:34 ` [PATCH v7 04/14] phy: tegra: xusb: Rearrange UPHY init on Tegra210 JC Kuo
2021-01-20 7:34 ` [PATCH v7 05/14] phy: tegra: xusb: Add Tegra210 lane_iddq operation JC Kuo
2021-01-20 7:34 ` JC Kuo [this message]
2021-01-20 7:34 ` [PATCH v7 07/14] soc/tegra: pmc: Provide USB sleepwalk register map JC Kuo
2021-01-20 7:34 ` [PATCH v7 08/14] arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop JC Kuo
2021-01-20 17:35 ` Thierry Reding
2021-01-20 7:34 ` [PATCH v7 09/14] dt-bindings: phy: tegra-xusb: Add nvidia,pmc prop JC Kuo
2021-01-20 17:32 ` Thierry Reding
2021-01-20 7:34 ` [PATCH v7 10/14] phy: tegra: xusb: Add wake/sleepwalk for Tegra210 JC Kuo
2021-01-20 7:34 ` [PATCH v7 11/14] phy: tegra: xusb: Tegra210 host mode VBUS control JC Kuo
2021-01-20 7:34 ` [PATCH v7 12/14] phy: tegra: xusb: Add wake/sleepwalk for Tegra186 JC Kuo
2021-01-20 7:34 ` [PATCH v7 13/14] usb: host: xhci-tegra: Unlink power domain devices JC Kuo
2021-01-20 7:34 ` [PATCH v7 14/14] xhci: tegra: Enable ELPG for runtime/system PM JC Kuo
2021-02-05 16:15 ` [PATCH v7 00/14] Tegra XHCI controller ELPG support Thierry Reding
2021-02-05 16:22 ` Greg KH
2021-03-24 12:39 ` Thierry Reding
2021-03-24 13:32 ` Thierry Reding
2021-03-25 6:15 ` Vinod Koul
2021-03-25 14:00 ` Thierry Reding
2021-03-25 14:05 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210120073414.69208-7-jckuo@nvidia.com \
--to=jckuo@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nkristam@nvidia.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).