linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tudor Ambarus <tudor.ambarus@microchip.com>
To: <michael@walle.cc>, <vigneshr@ti.com>, <p.yadav@ti.com>
Cc: <miquel.raynal@bootlin.com>, <richard@nod.at>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<Kavyasree.Kotagiri@microchip.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>
Subject: [PATCH v3 1/2] mtd: spi-nor: Add Global Block Unlock command
Date: Thu, 21 Jan 2021 13:05:45 +0200	[thread overview]
Message-ID: <20210121110546.382633-1-tudor.ambarus@microchip.com> (raw)

The Global Block Unlock command has different names depending
on the manufacturer, but always the same command value: 0x98.
Macronix's MX25U12835F names it Gang Block Unlock, Winbond's
W25Q128FV names it Global Block Unlock and Microchip's
SST26VF064B names it Global Block Protection Unlock.

Used in the Individual Block Protection mode, which is mutually
exclusive with the Block Protection mode (BP0-3).

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
---
v3:
- s/Winbound/Winbond
- Add Michael's R-b tag
v2:
- s/mutual/mutually/
- set the GBULK cmd buswidth to 0 and call spi_nor_spimem_setup_op()
to update it, because the op can can be issued in QPI mode as well.
- add Pratyush's R-b tag

 drivers/mtd/spi-nor/core.c  | 37 +++++++++++++++++++++++++++++++++++++
 drivers/mtd/spi-nor/core.h  |  1 +
 include/linux/mtd/spi-nor.h |  1 +
 3 files changed, 39 insertions(+)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 20df44b753da..e82732dd31e1 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -853,6 +853,43 @@ int spi_nor_wait_till_ready(struct spi_nor *nor)
 						    DEFAULT_READY_WAIT_JIFFIES);
 }
 
+/**
+ * spi_nor_global_block_unlock() - Unlock Global Block Protection.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_global_block_unlock(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_GBULK, 0),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_NO_DATA);
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_GBULK,
+						       NULL, 0);
+	}
+
+	if (ret) {
+		dev_dbg(nor->dev, "error %d on Global Block Unlock\n", ret);
+		return ret;
+	}
+
+	return spi_nor_wait_till_ready(nor);
+}
+
 /**
  * spi_nor_write_sr() - Write the Status Register.
  * @nor:	pointer to 'struct spi_nor'.
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index d631ee299de3..eb26796db026 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -434,6 +434,7 @@ int spi_nor_write_disable(struct spi_nor *nor);
 int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
 int spi_nor_write_ear(struct spi_nor *nor, u8 ear);
 int spi_nor_wait_till_ready(struct spi_nor *nor);
+int spi_nor_global_block_unlock(struct spi_nor *nor);
 int spi_nor_lock_and_prep(struct spi_nor *nor);
 void spi_nor_unlock_and_unprep(struct spi_nor *nor);
 int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index d13958de6d8a..a0d572855444 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -53,6 +53,7 @@
 #define SPINOR_OP_WREAR		0xc5	/* Write Extended Address Register */
 #define SPINOR_OP_SRSTEN	0x66	/* Software Reset Enable */
 #define SPINOR_OP_SRST		0x99	/* Software Reset */
+#define SPINOR_OP_GBULK		0x98    /* Global Block Unlock */
 
 /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
 #define SPINOR_OP_READ_4B	0x13	/* Read data bytes (low frequency) */
-- 
2.25.1


             reply	other threads:[~2021-01-21 11:09 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-21 11:05 Tudor Ambarus [this message]
2021-01-21 11:05 ` [PATCH v3 2/2] mtd: spi-nor: sst: Add support for Global Unlock on sst26vf Tudor Ambarus
2021-01-21 11:19   ` Michael Walle
2021-02-05 13:31 ` [PATCH v3 1/2] mtd: spi-nor: Add Global Block Unlock command Tudor Ambarus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210121110546.382633-1-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=Kavyasree.Kotagiri@microchip.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=michael@walle.cc \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.yadav@ti.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).