From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: torvalds@transmeta.com, linux-kernel@vger.kernel.org
Subject: PATCH: fix ppa for new scsi
Date: Fri, 14 Feb 2003 21:05:09 +0000 (GMT) [thread overview]
Message-ID: <E18jn1B-0005gQ-00@the-village.bc.nu> (raw)
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.5.60-ref/drivers/scsi/ppa.c linux-2.5.60-ac1/drivers/scsi/ppa.c
--- linux-2.5.60-ref/drivers/scsi/ppa.c 2003-02-14 21:21:36.000000000 +0000
+++ linux-2.5.60-ac1/drivers/scsi/ppa.c 2003-02-14 20:36:01.000000000 +0000
@@ -148,7 +148,7 @@
"pardevice is owning the port for too longtime!\n",
i);
parport_unregister_device(ppa_hosts[i].dev);
- spin_lock_irq(ppa_hosts[i].cur_cmd->host->host_lock);
+ spin_lock_irq(ppa_hosts[i].cur_cmd->device->host->host_lock);
return 0;
}
}
@@ -635,7 +635,7 @@
static inline int ppa_send_command(Scsi_Cmnd * cmd)
{
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
int k;
w_ctr(PPA_BASE(host_no), 0x0c);
@@ -661,7 +661,7 @@
* 0 Told to schedule
* 1 Finished data transfer
*/
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
unsigned short ppb = PPA_BASE(host_no);
unsigned long start_jiffies = jiffies;
@@ -752,7 +752,7 @@
int ppa_command(Scsi_Cmnd * cmd)
{
static int first_pass = 1;
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
if (first_pass) {
printk("ppa: using non-queuing interface\n");
@@ -774,7 +774,7 @@
schedule();
if (cmd->SCp.phase) /* Only disconnect if we have connected */
- ppa_disconnect(cmd->host->unique_id);
+ ppa_disconnect(cmd->device->host->unique_id);
ppa_pb_release(host_no);
ppa_hosts[host_no].cur_cmd = 0;
@@ -807,7 +807,7 @@
case DID_OK:
break;
case DID_NO_CONNECT:
- printk("ppa: no device at SCSI ID %i\n", cmd->target);
+ printk("ppa: no device at SCSI ID %i\n", cmd->device->target);
break;
case DID_BUS_BUSY:
printk("ppa: BUS BUSY - EPP timeout detected\n");
@@ -836,21 +836,21 @@
#endif
if (cmd->SCp.phase > 1)
- ppa_disconnect(cmd->host->unique_id);
+ ppa_disconnect(cmd->device->host->unique_id);
if (cmd->SCp.phase > 0)
- ppa_pb_release(cmd->host->unique_id);
+ ppa_pb_release(cmd->device->host->unique_id);
tmp->cur_cmd = 0;
- spin_lock_irqsave(cmd->host->host_lock, flags);
+ spin_lock_irqsave(cmd->device->host->host_lock, flags);
cmd->scsi_done(cmd);
- spin_unlock_irqrestore(cmd->host->host_lock, flags);
+ spin_unlock_irqrestore(cmd->device->host->host_lock, flags);
return;
}
static int ppa_engine(ppa_struct * tmp, Scsi_Cmnd * cmd)
{
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
unsigned short ppb = PPA_BASE(host_no);
unsigned char l = 0, h = 0;
int retv;
@@ -900,7 +900,7 @@
}
case 2: /* Phase 2 - We are now talking to the scsi bus */
- if (!ppa_select(host_no, cmd->target)) {
+ if (!ppa_select(host_no, cmd->device->id)) {
ppa_fail(host_no, DID_NO_CONNECT);
return 0;
}
@@ -966,7 +966,7 @@
int ppa_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
{
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
if (ppa_hosts[host_no].cur_cmd) {
printk("PPA: bug in ppa_queuecommand\n");
@@ -1011,7 +1011,7 @@
int ppa_abort(Scsi_Cmnd * cmd)
{
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
/*
* There is no method for aborting commands since Iomega
* have tied the SCSI_MESSAGE line high in the interface
@@ -1039,7 +1039,7 @@
int ppa_reset(Scsi_Cmnd * cmd)
{
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
if (cmd->SCp.phase)
ppa_disconnect(host_no);
reply other threads:[~2003-02-14 20:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E18jn1B-0005gQ-00@the-village.bc.nu \
--to=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).