From: Daniel Walker <danielwa@cisco.com>
To: Michal Simek <michal.simek@xilinx.com>
Cc: Daniel Walker <dwalker@fifo99.com>,
xe-linux-external@cisco.com, Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] arm64: boot: dts: add new dts for hellcat & petra
Date: Thu, 21 Jan 2021 15:12:35 -0800 [thread overview]
Message-ID: <20210121231237.30664-1-danielwa@cisco.com> (raw)
Add Petra and Hellcat dts file. These platforms are based on
the Xilinx Zynqmp platform.
Signed-off-by: Daniel Walker <dwalker@fifo99.com>
Cc: xe-linux-external@cisco.com
---
arch/arm64/boot/dts/xilinx/Makefile | 2 +
.../boot/dts/xilinx/zynqmp-petra-hellcat.dts | 856 ++++++++++++++++++
arch/arm64/boot/dts/xilinx/zynqmp-petra.dts | 847 +++++++++++++++++
3 files changed, 1705 insertions(+)
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-petra-hellcat.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-petra.dts
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
index 60f5443f3ef4..d9eacb3c60e5 100644
--- a/arch/arm64/boot/dts/xilinx/Makefile
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -15,3 +15,5 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-petra.dts
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-petra-hellcat.dts
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-petra-hellcat.dts b/arch/arm64/boot/dts/xilinx/zynqmp-petra-hellcat.dts
new file mode 100644
index 000000000000..87e23c1cac65
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-petra-hellcat.dts
@@ -0,0 +1,856 @@
+/*
+ * dts file for Cisco Petra-Hellcat Switching IOT platform
+ *
+ * (C) Copyright 2016-2018, Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/*
+ ********************* PL *********************
+ */
+
+/ {
+ reserved-memory {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ ranges;
+
+ rproc@3ed00000 {
+ no-map;
+ reg = <0x0 0x3ed00000 0x0 0x1000000>;
+ };
+ zynqmp_sha_reserved: buffer@0 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x0 0x78000000 0x0 0x00020000>;
+ };
+ };
+
+ sha384 {
+ compatible = "xlnx,zynqmp-keccak-384";
+ memory-region = <&zynqmp_sha_reserved>;
+ };
+
+ amba_pl: amba_pl@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges ;
+ design_1_i_axi_iic_BP: i2c@80104000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 93 4>;
+ reg = <0x0 0x80104000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_KM_PLT: i2c@80106000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 107 4>;
+ reg = <0x0 0x80106000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_LC1: i2c@80100000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 89 4>;
+ reg = <0x0 0x80100000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_LC2: i2c@80101000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 90 4>;
+ reg = <0x0 0x80101000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_LC3: i2c@80102000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 91 4>;
+ reg = <0x0 0x80102000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_PS: i2c@80103000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 92 4>;
+ reg = <0x0 0x80103000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_SUP: i2c@80105000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 94 4>;
+ reg = <0x0 0x80105000 0x0 0x1000>;
+ };
+ design_1_i_axi_quad_spi_LED: axi_quad_spi@80108000 {
+ bits-per-word = <8>;
+ compatible = "xlnx,xps-spi-2.00.a";
+ fifo-size = <16>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 106 1>;
+ num-cs = <0x3>;
+ reg = <0x0 0x80108000 0x0 0x1000>;
+ xlnx,num-ss-bits = <0x3>;
+ xlnx,spi-mode = <0>;
+ clock-names = "axi_clk", "axi4_clk", "spi_clk";
+ clocks = <0x3 0x47 0x3 0x47 0x3 0x47>;
+ };
+ design_1_i_axi_quad_spi_lc3: axi_quad_spi@80107000 {
+ bits-per-word = <8>;
+ compatible = "xlnx,xps-spi-2.00.a";
+ fifo-size = <16>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 95 1>;
+ num-cs = <0x1>;
+ reg = <0x0 0x80107000 0x0 0x1000>;
+ xlnx,num-ss-bits = <0x1>;
+ xlnx,spi-mode = <0>;
+ clock-names = "axi_clk", "axi4_clk", "spi_clk";
+ clocks = <0x3 0x47 0x3 0x47 0x3 0x48>;
+ };
+ design_1_i_mqueue_tm_ip_0: mqueue_tm_ip@80200000 {
+ compatible = "xlnx,mqueue-tm-ip-1.0";
+ interrupt-parent = <&gic>;
+ interrupts = <0 108 4 0 109 4 0 110 4 0 111 4>;
+ reg = <0x0 0x80200000 0x0 0x10000 0x80280000 0x10000 0x80300000 0x100000>;
+ xlnx,dma-data-axi-addr-width = <0x20>;
+ xlnx,dma-data-axi-data-width = <0x20>;
+ xlnx,dma-desc-axi-addr-width = <0x20>;
+ xlnx,dma-desc-axi-data-width = <0x20>;
+ xlnx,has-sgmii = <0x0>;
+ xlnx,mcam-axi-addr-width = <0x14>;
+ xlnx,mcam-axi-data-width = <0x20>;
+ xlnx,mdma-axi-addr-width = <0x10>;
+ xlnx,mdma-axi-data-width = <0x20>;
+ xlnx,mqtm-axi-addr-width = <0x10>;
+ xlnx,mqtm-axi-data-width = <0x20>;
+ xlnx,pktreq-width = <0xe>;
+ xlnx,queues = <0x40>;
+ };
+ design_1_i_system_management_wiz_0: system_management_wiz@8010a000 {
+ compatible = "xlnx,system-management-wiz-1.3";
+ reg = <0x0 0x8010a000 0x0 0x1000>;
+ xlnx,alarm-limit-r0 = <0xb794>;
+ xlnx,alarm-limit-r1 = <0x4e81>;
+ xlnx,alarm-limit-r10 = <0x5555>;
+ xlnx,alarm-limit-r11 = <0x5111>;
+ xlnx,alarm-limit-r12 = <0x9999>;
+ xlnx,alarm-limit-r13 = <0x91eb>;
+ xlnx,alarm-limit-r14 = <0x6aaa>;
+ xlnx,alarm-limit-r15 = <0x6666>;
+ xlnx,alarm-limit-r2 = <0xa147>;
+ xlnx,alarm-limit-r3 = <0xcba3>;
+ xlnx,alarm-limit-r4 = <0xab03>;
+ xlnx,alarm-limit-r5 = <0x4963>;
+ xlnx,alarm-limit-r6 = <0x9555>;
+ xlnx,alarm-limit-r7 = <0xb00a>;
+ xlnx,alarm-limit-r8 = <0x4e81>;
+ xlnx,alarm-limit-r9 = <0x4963>;
+ xlnx,alarm-limit-slave0-ssit-usl1 = <0x98bf>;
+ xlnx,alarm-limit-slave0-ssit-usl2 = <0x4bf2>;
+ xlnx,alarm-limit-slave0-ssit-usl3 = <0x98bf>;
+ xlnx,alarm-limit-slave0-ssit-usl4 = <0x98bf>;
+ xlnx,alarm-limit-slave0-ssit-usu1 = <0x9a74>;
+ xlnx,alarm-limit-slave0-ssit-usu2 = <0x4da6>;
+ xlnx,alarm-limit-slave0-ssit-usu3 = <0x9a74>;
+ xlnx,alarm-limit-slave0-ssit-usu4 = <0x9a74>;
+ xlnx,alarm-limit-slave1-ssit-usl1 = <0x98bf>;
+ xlnx,alarm-limit-slave1-ssit-usl2 = <0x4bf2>;
+ xlnx,alarm-limit-slave1-ssit-usl3 = <0x98bf>;
+ xlnx,alarm-limit-slave1-ssit-usl4 = <0x98bf>;
+ xlnx,alarm-limit-slave1-ssit-usu1 = <0x9a74>;
+ xlnx,alarm-limit-slave1-ssit-usu2 = <0x4da6>;
+ xlnx,alarm-limit-slave1-ssit-usu3 = <0x9a74>;
+ xlnx,alarm-limit-slave1-ssit-usu4 = <0x9a74>;
+ xlnx,alarm-limit-slave2-ssit-usl1 = <0x98bf>;
+ xlnx,alarm-limit-slave2-ssit-usl2 = <0x4bf2>;
+ xlnx,alarm-limit-slave2-ssit-usl3 = <0x98bf>;
+ xlnx,alarm-limit-slave2-ssit-usl4 = <0x98bf>;
+ xlnx,alarm-limit-slave2-ssit-usu1 = <0x9a74>;
+ xlnx,alarm-limit-slave2-ssit-usu2 = <0x4da6>;
+ xlnx,alarm-limit-slave2-ssit-usu3 = <0x9a74>;
+ xlnx,alarm-limit-slave2-ssit-usu4 = <0x9a74>;
+ xlnx,alarm-limit-usl1 = <0xd47a>;
+ xlnx,alarm-limit-usl2 = <0x4bf2>;
+ xlnx,alarm-limit-usl3 = <0x98bf>;
+ xlnx,alarm-limit-usl4 = <0x98bf>;
+ xlnx,alarm-limit-usu1 = <0xd62f>;
+ xlnx,alarm-limit-usu2 = <0x4da6>;
+ xlnx,alarm-limit-usu3 = <0x9a74>;
+ xlnx,alarm-limit-usu4 = <0x9a74>;
+ xlnx,average-en-slave0-ssit-vuser0 = <0x0>;
+ xlnx,average-en-slave0-ssit-vuser1 = <0x0>;
+ xlnx,average-en-slave0-ssit-vuser2 = <0x0>;
+ xlnx,average-en-slave0-ssit-vuser3 = <0x0>;
+ xlnx,average-en-slave1-ssit-vuser0 = <0x0>;
+ xlnx,average-en-slave1-ssit-vuser1 = <0x0>;
+ xlnx,average-en-slave1-ssit-vuser2 = <0x0>;
+ xlnx,average-en-slave1-ssit-vuser3 = <0x0>;
+ xlnx,average-en-slave2-ssit-vuser0 = <0x0>;
+ xlnx,average-en-slave2-ssit-vuser1 = <0x0>;
+ xlnx,average-en-slave2-ssit-vuser2 = <0x0>;
+ xlnx,average-en-slave2-ssit-vuser3 = <0x0>;
+ xlnx,average-en-vuser0 = <0x0>;
+ xlnx,average-en-vuser1 = <0x0>;
+ xlnx,average-en-vuser2 = <0x0>;
+ xlnx,average-en-vuser3 = <0x0>;
+ xlnx,avg-slave0-ssit-vuser = <0x0>;
+ xlnx,avg-slave1-ssit-vuser = <0x0>;
+ xlnx,avg-slave2-ssit-vuser = <0x0>;
+ xlnx,avg-vuser = <0x0>;
+ xlnx,channel-cnt = <0xb>;
+ xlnx,common-n-source = "Null";
+ xlnx,configuration-r0 = <0x0>;
+ xlnx,configuration-r1 = <0x2190>;
+ xlnx,configuration-r2 = <0x1400>;
+ xlnx,configuration-r3 = <0xf>;
+ xlnx,configuration-r4 = <0x0>;
+ xlnx,configuration-r4-1 = <0xc>;
+ xlnx,configuration-r4-2 = <0xd>;
+ xlnx,configuration-r4-3 = <0xe>;
+ xlnx,configuration-r4-4 = <0x8>;
+ xlnx,configuration-slave0-ssit-r3 = <0xf>;
+ xlnx,configuration-slave0-ssit-r4-1 = <0xc>;
+ xlnx,configuration-slave0-ssit-r4-2 = <0xd>;
+ xlnx,configuration-slave0-ssit-r4-3 = <0xe>;
+ xlnx,configuration-slave0-ssit-r4-4 = <0x8>;
+ xlnx,configuration-slave1-ssit-r3 = <0xf>;
+ xlnx,configuration-slave1-ssit-r4-1 = <0xc>;
+ xlnx,configuration-slave1-ssit-r4-2 = <0xd>;
+ xlnx,configuration-slave1-ssit-r4-3 = <0xe>;
+ xlnx,configuration-slave1-ssit-r4-4 = <0x8>;
+ xlnx,configuration-slave2-ssit-r3 = <0xf>;
+ xlnx,configuration-slave2-ssit-r4-1 = <0xc>;
+ xlnx,configuration-slave2-ssit-r4-2 = <0xd>;
+ xlnx,configuration-slave2-ssit-r4-3 = <0xe>;
+ xlnx,configuration-slave2-ssit-r4-4 = <0x8>;
+ xlnx,dclk-frequency = <0x64>;
+ xlnx,dual-seq = <0x0>;
+ xlnx,dual-sequence-r0 = <0x0>;
+ xlnx,dual-sequence-r1 = <0x0>;
+ xlnx,dual-sequence-r2 = <0x0>;
+ xlnx,dual0-register = <0x0>;
+ xlnx,dual1-register = <0x0>;
+ xlnx,dual2-register = <0x0>;
+ xlnx,dual3-register = <0x0>;
+ xlnx,enable-adc-data-out-master = <0x0>;
+ xlnx,enable-adc-data-out-slave0 = <0x0>;
+ xlnx,enable-adc-data-out-slave1 = <0x0>;
+ xlnx,enable-adc-data-out-slave2 = <0x0>;
+ xlnx,enable-dual-sequence-mode = <0x0>;
+ xlnx,enable-slave0 = <0x0>;
+ xlnx,enable-slave1 = <0x0>;
+ xlnx,enable-slave2 = <0x0>;
+ xlnx,external-mux-channel = "VP_VN";
+ xlnx,external-muxaddr-enable = <0x0>;
+ xlnx,fifo-depth = <0x7>;
+ xlnx,has-axi = <0x1>;
+ xlnx,has-axi4stream = <0x0>;
+ xlnx,has-busy = <0x1>;
+ xlnx,has-channel = <0x1>;
+ xlnx,has-convst = <0x0>;
+ xlnx,has-convstclk = <0x0>;
+ xlnx,has-dclk = <0x1>;
+ xlnx,has-drp = <0x0>;
+ xlnx,has-eoc = <0x1>;
+ xlnx,has-eos = <0x1>;
+ xlnx,has-external-mux = <0x0>;
+ xlnx,has-i2c = <0x0>;
+ xlnx,has-i2c-slave = <0x0>;
+ xlnx,has-jtagbusy = <0x0>;
+ xlnx,has-jtaglocked = <0x0>;
+ xlnx,has-jtagmodified = <0x0>;
+ xlnx,has-ot-alarm = <0x1>;
+ xlnx,has-pmbus = <0x0>;
+ xlnx,has-pmc = <0x0>;
+ xlnx,has-pmc-master = <0x0>;
+ xlnx,has-reset = <0x0>;
+ xlnx,has-slave0-ssit-temp-ch = <0x1>;
+ xlnx,has-slave0-ssit-vuser0 = <0x0>;
+ xlnx,has-slave0-ssit-vuser1 = <0x0>;
+ xlnx,has-slave0-ssit-vuser2 = <0x0>;
+ xlnx,has-slave0-ssit-vuser3 = <0x0>;
+ xlnx,has-slave1-ssit-temp-ch = <0x1>;
+ xlnx,has-slave1-ssit-vuser0 = <0x0>;
+ xlnx,has-slave1-ssit-vuser1 = <0x0>;
+ xlnx,has-slave1-ssit-vuser2 = <0x0>;
+ xlnx,has-slave1-ssit-vuser3 = <0x0>;
+ xlnx,has-slave2-ssit-temp-ch = <0x1>;
+ xlnx,has-slave2-ssit-vuser0 = <0x0>;
+ xlnx,has-slave2-ssit-vuser1 = <0x0>;
+ xlnx,has-slave2-ssit-vuser2 = <0x0>;
+ xlnx,has-slave2-ssit-vuser3 = <0x0>;
+ xlnx,has-temp-bus = <0x0>;
+ xlnx,has-user-supply0-alarm = <0x0>;
+ xlnx,has-user-supply0-slave0-ssit-alarm = <0x0>;
+ xlnx,has-user-supply0-slave1-ssit-alarm = <0x0>;
+ xlnx,has-user-supply0-slave2-ssit-alarm = <0x0>;
+ xlnx,has-user-supply1-alarm = <0x0>;
+ xlnx,has-user-supply1-slave0-ssit-alarm = <0x0>;
+ xlnx,has-user-supply1-slave1-ssit-alarm = <0x0>;
+ xlnx,has-user-supply1-slave2-ssit-alarm = <0x0>;
+ xlnx,has-user-supply2-alarm = <0x0>;
+ xlnx,has-user-supply2-slave0-ssit-alarm = <0x0>;
+ xlnx,has-user-supply2-slave1-ssit-alarm = <0x0>;
+ xlnx,has-user-supply2-slave2-ssit-alarm = <0x0>;
+ xlnx,has-user-supply3-alarm = <0x0>;
+ xlnx,has-user-supply3-slave0-ssit-alarm = <0x0>;
+ xlnx,has-user-supply3-slave1-ssit-alarm = <0x0>;
+ xlnx,has-user-supply3-slave2-ssit-alarm = <0x0>;
+ xlnx,has-user-temp-alarm = <0x1>;
+ xlnx,has-vbram-alarm = <0x0>;
+ xlnx,has-vccaux-alarm = <0x1>;
+ xlnx,has-vccddro-alarm = <0x0>;
+ xlnx,has-vccint-alarm = <0x1>;
+ xlnx,has-vccpaux-alarm = <0x0>;
+ xlnx,has-vccpint-alarm = <0x0>;
+ xlnx,has-vccpsaux-alarm = <0x0>;
+ xlnx,has-vccpsintfp-alarm = <0x0>;
+ xlnx,has-vccpsintlp-alarm = <0x0>;
+ xlnx,has-vn = <0x1>;
+ xlnx,has-vp = <0x1>;
+ xlnx,has-vuser0 = <0x0>;
+ xlnx,has-vuser1 = <0x0>;
+ xlnx,has-vuser2 = <0x0>;
+ xlnx,has-vuser3 = <0x0>;
+ xlnx,i2c-clk-period = "2500.000";
+ xlnx,i2c-sclk-loc = "K9";
+ xlnx,i2c-sda-loc = "H9";
+ xlnx,i2c-slave-address = <0x20>;
+ xlnx,i2c-slave0-address = <0x20>;
+ xlnx,i2c-slave1-address = <0x20>;
+ xlnx,i2c-slave2-address = <0x20>;
+ xlnx,include-intr = <0x1>;
+ xlnx,is-diablo = <0x1>;
+ xlnx,is-ssit-slave0 = <0x0>;
+ xlnx,is-ssit-slave0-analog-bank = <0x0>;
+ xlnx,is-ssit-slave1 = <0x0>;
+ xlnx,is-ssit-slave1-analog-bank = <0x0>;
+ xlnx,is-ssit-slave2 = <0x0>;
+ xlnx,is-ssit-slave2-analog-bank = <0x0>;
+ xlnx,sampling-rate = "192307.6923076923";
+ xlnx,sequence-r0 = <0x4701>;
+ xlnx,sequence-r1 = <0x3f>;
+ xlnx,sequence-r2 = <0x0>;
+ xlnx,sequence-r3 = <0x0>;
+ xlnx,sequence-r4 = <0x0>;
+ xlnx,sequence-r5 = <0x0>;
+ xlnx,sequence-r6 = <0x0>;
+ xlnx,sequence-r7 = <0x0>;
+ xlnx,sequence-r8 = <0x0>;
+ xlnx,sequence-slave0-ssit-r0 = <0x100>;
+ xlnx,sequence-slave0-ssit-r8 = <0x0>;
+ xlnx,sequence-slave1-ssit-r0 = <0x100>;
+ xlnx,sequence-slave1-ssit-r8 = <0x0>;
+ xlnx,sequence-slave2-ssit-r0 = <0x100>;
+ xlnx,sequence-slave2-ssit-r8 = <0x0>;
+ xlnx,sim-device = "ZYNQ_ULTRASCALE";
+ xlnx,sim-file-name = "design";
+ xlnx,sim-file-rel-path = "./";
+ xlnx,sim-file-sel = "Default";
+ xlnx,user-supply0-bank = <0x2c>;
+ xlnx,user-supply0-slave0-ssit-bank = <0x2c>;
+ xlnx,user-supply0-slave0-ssit-source = "VCCO";
+ xlnx,user-supply0-slave1-ssit-bank = <0x2c>;
+ xlnx,user-supply0-slave1-ssit-source = "VCCO";
+ xlnx,user-supply0-slave2-ssit-bank = <0x2c>;
+ xlnx,user-supply0-slave2-ssit-source = "VCCO";
+ xlnx,user-supply0-source = "VCCO";
+ xlnx,user-supply1-bank = <0x2c>;
+ xlnx,user-supply1-slave0-ssit-bank = <0x2c>;
+ xlnx,user-supply1-slave0-ssit-source = "VCCINT";
+ xlnx,user-supply1-slave1-ssit-bank = <0x2c>;
+ xlnx,user-supply1-slave1-ssit-source = "VCCINT";
+ xlnx,user-supply1-slave2-ssit-bank = <0x2c>;
+ xlnx,user-supply1-slave2-ssit-source = "VCCINT";
+ xlnx,user-supply1-source = "VCCINT";
+ xlnx,user-supply2-bank = <0x2c>;
+ xlnx,user-supply2-slave0-ssit-bank = <0x2c>;
+ xlnx,user-supply2-slave0-ssit-source = "VCCAUX";
+ xlnx,user-supply2-slave1-ssit-bank = <0x2c>;
+ xlnx,user-supply2-slave1-ssit-source = "VCCAUX";
+ xlnx,user-supply2-slave2-ssit-bank = <0x2c>;
+ xlnx,user-supply2-slave2-ssit-source = "VCCAUX";
+ xlnx,user-supply2-source = "VCCAUX";
+ xlnx,user-supply3-bank = <0x41>;
+ xlnx,user-supply3-slave0-ssit-bank = <0x41>;
+ xlnx,user-supply3-slave0-ssit-source = "VCCO";
+ xlnx,user-supply3-slave1-ssit-bank = <0x41>;
+ xlnx,user-supply3-slave1-ssit-source = "VCCO";
+ xlnx,user-supply3-slave2-ssit-bank = <0x41>;
+ xlnx,user-supply3-slave2-ssit-source = "VCCO";
+ xlnx,user-supply3-source = "VCCO";
+ xlnx,vaux0 = <0x1>;
+ xlnx,vaux1 = <0x1>;
+ xlnx,vaux10 = <0x0>;
+ xlnx,vaux11 = <0x0>;
+ xlnx,vaux12 = <0x0>;
+ xlnx,vaux13 = <0x0>;
+ xlnx,vaux14 = <0x0>;
+ xlnx,vaux15 = <0x0>;
+ xlnx,vaux2 = <0x1>;
+ xlnx,vaux3 = <0x1>;
+ xlnx,vaux4 = <0x1>;
+ xlnx,vaux5 = <0x1>;
+ xlnx,vaux6 = <0x0>;
+ xlnx,vaux7 = <0x0>;
+ xlnx,vaux8 = <0x0>;
+ xlnx,vaux9 = <0x0>;
+ xlnx,vauxn0-loc = "AF2";
+ xlnx,vauxn1-loc = "AH3";
+ xlnx,vauxn10-loc = "AC2";
+ xlnx,vauxn11-loc = "AB3";
+ xlnx,vauxn12-loc = "AH7";
+ xlnx,vauxn13-loc = "AH9";
+ xlnx,vauxn14-loc = "AC7";
+ xlnx,vauxn15-loc = "AC8";
+ xlnx,vauxn2-loc = "AC1";
+ xlnx,vauxn3-loc = "AD1";
+ xlnx,vauxn4-loc = "AG5";
+ xlnx,vauxn5-loc = "AG8";
+ xlnx,vauxn6-loc = "AC6";
+ xlnx,vauxn7-loc = "AE7";
+ xlnx,vauxn8-loc = "AF3";
+ xlnx,vauxn9-loc = "AH4";
+ xlnx,vauxp0-loc = "AE2";
+ xlnx,vauxp1-loc = "AG3";
+ xlnx,vauxp10-loc = "AB2";
+ xlnx,vauxp11-loc = "AB4";
+ xlnx,vauxp12-loc = "AH8";
+ xlnx,vauxp13-loc = "AG9";
+ xlnx,vauxp14-loc = "AB7";
+ xlnx,vauxp15-loc = "AB8";
+ xlnx,vauxp2-loc = "AB1";
+ xlnx,vauxp3-loc = "AD2";
+ xlnx,vauxp4-loc = "AG6";
+ xlnx,vauxp5-loc = "AF8";
+ xlnx,vauxp6-loc = "AB6";
+ xlnx,vauxp7-loc = "AD7";
+ xlnx,vauxp8-loc = "AE3";
+ xlnx,vauxp9-loc = "AG4";
+ xlnx,vpvn = <0x0>;
+ };
+ psu_ctrl_ipi: PERIPHERAL@ff380000 {
+ compatible = "xlnx,PERIPHERAL-1.0";
+ reg = <0x0 0xff380000 0x0 0x80000>;
+ };
+ psu_message_buffers: PERIPHERAL@ff990000 {
+ compatible = "xlnx,PERIPHERAL-1.0";
+ reg = <0x0 0xff990000 0x0 0x10000>;
+ };
+ misc_clk_0: misc_clk_0 {
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ compatible = "fixed-clock";
+ };
+ tm_dma {
+ compatible = "xlnx,tm-drv";
+ reg = <0x0 0x80200000 0x0 0x4000 0x0 0x80280000 0x0 0x4000>;
+ interrupt-parent = <0x4>;
+ interrupts = <0x0 0x6c 0x4>;
+ };
+ tm_veth {
+ compatible = "xlnx,tm-veth";
+ reg = <0x0 0x80200000 0x0 0x4000 0x0 0x80280000 0x0 0x4000>;
+ interrupt-parent = <0x4>;
+ interrupts = <0x0 0x6d 0x4>;
+ };
+ };
+};
+
+/*
+ ********************* PCW / SYS *********************
+ */
+
+&lpd_dma_chan1 {
+ status = "okay";
+};
+
+&lpd_dma_chan2 {
+ status = "okay";
+};
+
+&lpd_dma_chan3 {
+ status = "okay";
+};
+
+&lpd_dma_chan4 {
+ status = "okay";
+};
+
+&lpd_dma_chan5 {
+ status = "okay";
+};
+
+&lpd_dma_chan6 {
+ status = "okay";
+};
+
+&lpd_dma_chan7 {
+ status = "okay";
+};
+
+&lpd_dma_chan8 {
+ status = "okay";
+};
+
+&fpd_dma_chan1 {
+ status = "okay";
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+};
+
+&gpio {
+ emio-gpio-width = <32>;
+ gpio-mask-high = <0x0>;
+ gpio-mask-low = <0x5600>;
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+ xlnx,pcie-mode = "Root Port";
+};
+
+&spi0 {
+ is-decoded-cs = <0>;
+ num-cs = <0x1>;
+ status = "okay";
+};
+
+&spi1 {
+ is-decoded-cs = <0>;
+ num-cs = <0x1>;
+ status = "okay";
+};
+
+&pss_ref_clk {
+ clock-frequency = <50000000>;
+};
+
+&rtc {
+ status= "disabled";
+};
+
+&watchdog0 {
+ status = "okay";
+ /delete-property/ reset-on-timeout;
+};
+
+&sdhci0 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ xlnx,mio_bank = <0x0>;
+};
+
+&sdhci1 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ xlnx,mio_bank = <0x1>;
+};
+
+&uart0 {
+ device_type = "serial";
+ port-number = <0>;
+ status = "okay";
+};
+
+&uart1 {
+ device_type = "serial";
+ port-number = <1>;
+ status = "disabled";
+};
+
+&usb0 {
+ status = "okay";
+ xlnx,usb-reset = <0x2faf080>;
+ clock-names = "bus_clk";
+ clocks = <0x3 0x20>;
+
+};
+
+&gem0 {
+ phy-mode = "gmii";
+ status = "okay";
+ xlnx,ptp-enet-clock = <0x0>;
+};
+
+&gem1 {
+ is-internal-pcspma ;
+ phy-mode = "sgmii";
+ status = "okay";
+ xlnx,ptp-enet-clock = <0x0>;
+};
+
+&gem2 {
+ phy-mode = "gmii";
+ status = "okay";
+ xlnx,ptp-enet-clock = <0x0>;
+};
+
+&gem3 {
+ phy-mode = "gmii";
+ status = "okay";
+ xlnx,ptp-enet-clock = <0x0>;
+ local-mac-address = [00 0a 35 00 22 01];
+};
+
+&sata {
+
+};
+
+/*
+&gpu {
+ status = "disabled";
+};
+
+&pinctrl0 {
+ status = "okay";
+};
+
+&serdes {
+ status = "okay";
+};
+
+&ams_ps {
+ status = "okay";
+};
+
+&ams_pl {
+ status = "okay";
+};
+
+&dwc3_0 {
+ status = "okay";
+ snps,dis_u2_susphy_quirk;
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ phy-names = "usb3-phy";
+ phys = <&lane2 0x4 0x0 0x2 0x5f5e100>;
+
+};
+
+&xilinx_ams {
+ status = "okay";
+};
+
+&qspi {
+ is-dual = <0>;
+ num-cs = <0x1>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ flash0: flash@0 {
+ compatible = "n25q512a", "micron,m25p80";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <108000000>;
+ partition@0x00000000 {
+ label = "boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@0x00100000 {
+ label = "bootenv";
+ reg = <0x00100000 0x00040000>;
+ };
+ partition@0x00140000 {
+ label = "kernel";
+ reg = <0x00140000 0x01600000>;
+ };
+ };
+};
+*/
+&design_1_i_axi_iic_SUP {
+ lm75@48 {
+ compatible = "lm75";
+ reg = <0x48>;
+ };
+ ds1337@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+};
+
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+ gpio1@74 {
+ compatible = "i2c-pca9539";
+ reg = <0x74>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ status = "okay";
+ gpio2@74 {
+ compatible = "i2c-pca9539";
+ reg = <0x74>;
+ };
+ gpio3@20 {
+ compatible = "i2c-pca8575";
+ reg = <0x20>;
+ };
+};
+
+&design_1_i_axi_quad_spi_LED {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device@0 {
+ compatible = "cisco,spi-petra";
+ reg = <0x0>;
+ spi-max-frequency = <0x2faf08>;
+ };
+ device@1 {
+ compatible = "cisco,spi-petra";
+ reg = <0x1>;
+ spi-max-frequency = <0x2faf08>;
+ };
+};
+
+&amba {
+ shm@0 {
+ compatible = "shm_uio";
+ reg = <0x0 0x3ed80000 0x0 0x800000>;
+ };
+
+ ipi@ff340000 {
+ compatible = "ipi_uio";
+ reg = <0x0 0xff340000 0x0 0x1000>;
+ interrupt-parent = <0x2>;
+ interrupts = <0x0 0x1d 0x4>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <1>;
+ spidev@0 {
+ compatible = "cisco,spi-petra";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ };
+};
+
+&spi1 {
+ status = "okay";
+ spidev@1 {
+ compatible = "cisco,spi-petra";
+ reg = <0x0>;
+ spi-max-frequency = <0xf4240>;
+ };
+};
+
+&design_1_i_axi_quad_spi_lc3 {
+ status = "okay";
+ device@0 {
+ compatible = "cisco,spi-petra";
+ reg = <0>; //Chip select 0
+ spi-max-frequency = <3125000>;
+ };
+};
+
+&gem0 {
+ status = "disabled";
+};
+
+&gem1 {
+ status = "disabled";
+};
+
+&gem2 {
+ status = "disabled";
+};
+
+&gem3 {
+ status = "disabled";
+};
+
+
+/ {
+ chosen {
+ bootargs = "earlycon console=ttyPS0,9600n8 clk_ignore_unused cpuidle.off=1";
+ stdout-path = "serial0:9600n8";
+ };
+ aliases {
+ ethernet0 = &gem0;
+ ethernet1 = &gem1;
+ ethernet2 = &gem2;
+ ethernet3 = &gem3;
+ serial0 = &uart0;
+ spi0 = &design_1_i_axi_quad_spi_LED;
+ spi1 = &design_1_i_axi_quad_spi_lc3;
+ //spi2 = &qspi;
+ spi3 = &spi0;
+ spi4 = &spi1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &design_1_i_axi_iic_LC1;
+ i2c3 = &design_1_i_axi_iic_LC2;
+ i2c4 = &design_1_i_axi_iic_LC3;
+ i2c5 = &design_1_i_axi_iic_PS;
+ i2c6 = &design_1_i_axi_iic_BP;
+ i2c7 = &design_1_i_axi_iic_SUP;
+ i2c8 = &design_1_i_axi_iic_KM_PLT;
+ };
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x0 0x0 0x80000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-petra.dts b/arch/arm64/boot/dts/xilinx/zynqmp-petra.dts
new file mode 100644
index 000000000000..594335740bf9
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-petra.dts
@@ -0,0 +1,847 @@
+/*
+ * dts file for Cisco Petra Switching IOT platform
+ *
+ * (C) Copyright 2016-2018, Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/*
+ ********************* PL *********************
+ */
+
+/ {
+ reserved-memory {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ ranges;
+
+ rproc@3ed00000 {
+ no-map;
+ reg = <0x0 0x3ed00000 0x0 0x1000000>;
+ };
+ zynqmp_sha_reserved: buffer@0 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x0 0x78000000 0x0 0x00020000>;
+ };
+ };
+
+ sha384 {
+ compatible = "xlnx,zynqmp-keccak-384";
+ memory-region = <&zynqmp_sha_reserved>;
+ };
+
+ amba_pl: amba_pl@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges ;
+ design_1_i_axi_iic_BP: i2c@80104000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 93 4>;
+ reg = <0x0 0x80104000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_KM_PLT: i2c@80106000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 107 4>;
+ reg = <0x0 0x80106000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_LC1: i2c@80100000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 89 4>;
+ reg = <0x0 0x80100000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_LC2: i2c@80101000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 90 4>;
+ reg = <0x0 0x80101000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_LC3: i2c@80102000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 91 4>;
+ reg = <0x0 0x80102000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_PS: i2c@80103000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 92 4>;
+ reg = <0x0 0x80103000 0x0 0x1000>;
+ };
+ design_1_i_axi_iic_SUP: i2c@80105000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <0x3 0x47>;
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 94 4>;
+ reg = <0x0 0x80105000 0x0 0x1000>;
+ };
+ design_1_i_axi_quad_spi_LED: axi_quad_spi@80108000 {
+ bits-per-word = <8>;
+ compatible = "xlnx,xps-spi-2.00.a";
+ fifo-size = <16>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 106 1>;
+ num-cs = <0x3>;
+ reg = <0x0 0x80108000 0x0 0x1000>;
+ xlnx,num-ss-bits = <0x3>;
+ xlnx,spi-mode = <0>;
+ clock-names = "axi_clk", "axi4_clk", "spi_clk";
+ clocks = <0x3 0x47 0x3 0x47 0x3 0x47>;
+ device@0 {
+ compatible = "cisco,spi-petra";
+ status = "disabled";
+ reg = <0x0>;
+ spi-max-frequency = <0x2faf08>;
+ };
+ };
+ design_1_i_axi_quad_spi_lc3: axi_quad_spi@80107000 {
+ bits-per-word = <8>;
+ compatible = "xlnx,xps-spi-2.00.a";
+ fifo-size = <16>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 95 1>;
+ num-cs = <0x1>;
+ reg = <0x0 0x80107000 0x0 0x1000>;
+ xlnx,num-ss-bits = <0x1>;
+ xlnx,spi-mode = <0>;
+ clock-names = "axi_clk", "axi4_clk", "spi_clk";
+ clocks = <0x3 0x47 0x3 0x47 0x3 0x48>;
+ };
+ design_1_i_mqueue_tm_ip_0: mqueue_tm_ip@80200000 {
+ compatible = "xlnx,mqueue-tm-ip-1.0";
+ interrupt-parent = <&gic>;
+ interrupts = <0 108 4 0 109 4 0 110 4 0 111 4>;
+ reg = <0x0 0x80200000 0x0 0x10000 0x80280000 0x10000 0x80300000 0x100000>;
+ xlnx,dma-data-axi-addr-width = <0x20>;
+ xlnx,dma-data-axi-data-width = <0x20>;
+ xlnx,dma-desc-axi-addr-width = <0x20>;
+ xlnx,dma-desc-axi-data-width = <0x20>;
+ xlnx,has-sgmii = <0x0>;
+ xlnx,mcam-axi-addr-width = <0x14>;
+ xlnx,mcam-axi-data-width = <0x20>;
+ xlnx,mdma-axi-addr-width = <0x10>;
+ xlnx,mdma-axi-data-width = <0x20>;
+ xlnx,mqtm-axi-addr-width = <0x10>;
+ xlnx,mqtm-axi-data-width = <0x20>;
+ xlnx,pktreq-width = <0xe>;
+ xlnx,queues = <0x40>;
+ };
+ design_1_i_system_management_wiz_0: system_management_wiz@8010a000 {
+ compatible = "xlnx,system-management-wiz-1.3";
+ reg = <0x0 0x8010a000 0x0 0x1000>;
+ xlnx,alarm-limit-r0 = <0xb794>;
+ xlnx,alarm-limit-r1 = <0x4e81>;
+ xlnx,alarm-limit-r10 = <0x5555>;
+ xlnx,alarm-limit-r11 = <0x5111>;
+ xlnx,alarm-limit-r12 = <0x9999>;
+ xlnx,alarm-limit-r13 = <0x91eb>;
+ xlnx,alarm-limit-r14 = <0x6aaa>;
+ xlnx,alarm-limit-r15 = <0x6666>;
+ xlnx,alarm-limit-r2 = <0xa147>;
+ xlnx,alarm-limit-r3 = <0xcba3>;
+ xlnx,alarm-limit-r4 = <0xab03>;
+ xlnx,alarm-limit-r5 = <0x4963>;
+ xlnx,alarm-limit-r6 = <0x9555>;
+ xlnx,alarm-limit-r7 = <0xb00a>;
+ xlnx,alarm-limit-r8 = <0x4e81>;
+ xlnx,alarm-limit-r9 = <0x4963>;
+ xlnx,alarm-limit-slave0-ssit-usl1 = <0x98bf>;
+ xlnx,alarm-limit-slave0-ssit-usl2 = <0x4bf2>;
+ xlnx,alarm-limit-slave0-ssit-usl3 = <0x98bf>;
+ xlnx,alarm-limit-slave0-ssit-usl4 = <0x98bf>;
+ xlnx,alarm-limit-slave0-ssit-usu1 = <0x9a74>;
+ xlnx,alarm-limit-slave0-ssit-usu2 = <0x4da6>;
+ xlnx,alarm-limit-slave0-ssit-usu3 = <0x9a74>;
+ xlnx,alarm-limit-slave0-ssit-usu4 = <0x9a74>;
+ xlnx,alarm-limit-slave1-ssit-usl1 = <0x98bf>;
+ xlnx,alarm-limit-slave1-ssit-usl2 = <0x4bf2>;
+ xlnx,alarm-limit-slave1-ssit-usl3 = <0x98bf>;
+ xlnx,alarm-limit-slave1-ssit-usl4 = <0x98bf>;
+ xlnx,alarm-limit-slave1-ssit-usu1 = <0x9a74>;
+ xlnx,alarm-limit-slave1-ssit-usu2 = <0x4da6>;
+ xlnx,alarm-limit-slave1-ssit-usu3 = <0x9a74>;
+ xlnx,alarm-limit-slave1-ssit-usu4 = <0x9a74>;
+ xlnx,alarm-limit-slave2-ssit-usl1 = <0x98bf>;
+ xlnx,alarm-limit-slave2-ssit-usl2 = <0x4bf2>;
+ xlnx,alarm-limit-slave2-ssit-usl3 = <0x98bf>;
+ xlnx,alarm-limit-slave2-ssit-usl4 = <0x98bf>;
+ xlnx,alarm-limit-slave2-ssit-usu1 = <0x9a74>;
+ xlnx,alarm-limit-slave2-ssit-usu2 = <0x4da6>;
+ xlnx,alarm-limit-slave2-ssit-usu3 = <0x9a74>;
+ xlnx,alarm-limit-slave2-ssit-usu4 = <0x9a74>;
+ xlnx,alarm-limit-usl1 = <0xd47a>;
+ xlnx,alarm-limit-usl2 = <0x4bf2>;
+ xlnx,alarm-limit-usl3 = <0x98bf>;
+ xlnx,alarm-limit-usl4 = <0x98bf>;
+ xlnx,alarm-limit-usu1 = <0xd62f>;
+ xlnx,alarm-limit-usu2 = <0x4da6>;
+ xlnx,alarm-limit-usu3 = <0x9a74>;
+ xlnx,alarm-limit-usu4 = <0x9a74>;
+ xlnx,average-en-slave0-ssit-vuser0 = <0x0>;
+ xlnx,average-en-slave0-ssit-vuser1 = <0x0>;
+ xlnx,average-en-slave0-ssit-vuser2 = <0x0>;
+ xlnx,average-en-slave0-ssit-vuser3 = <0x0>;
+ xlnx,average-en-slave1-ssit-vuser0 = <0x0>;
+ xlnx,average-en-slave1-ssit-vuser1 = <0x0>;
+ xlnx,average-en-slave1-ssit-vuser2 = <0x0>;
+ xlnx,average-en-slave1-ssit-vuser3 = <0x0>;
+ xlnx,average-en-slave2-ssit-vuser0 = <0x0>;
+ xlnx,average-en-slave2-ssit-vuser1 = <0x0>;
+ xlnx,average-en-slave2-ssit-vuser2 = <0x0>;
+ xlnx,average-en-slave2-ssit-vuser3 = <0x0>;
+ xlnx,average-en-vuser0 = <0x0>;
+ xlnx,average-en-vuser1 = <0x0>;
+ xlnx,average-en-vuser2 = <0x0>;
+ xlnx,average-en-vuser3 = <0x0>;
+ xlnx,avg-slave0-ssit-vuser = <0x0>;
+ xlnx,avg-slave1-ssit-vuser = <0x0>;
+ xlnx,avg-slave2-ssit-vuser = <0x0>;
+ xlnx,avg-vuser = <0x0>;
+ xlnx,channel-cnt = <0xb>;
+ xlnx,common-n-source = "Null";
+ xlnx,configuration-r0 = <0x0>;
+ xlnx,configuration-r1 = <0x2190>;
+ xlnx,configuration-r2 = <0x1400>;
+ xlnx,configuration-r3 = <0xf>;
+ xlnx,configuration-r4 = <0x0>;
+ xlnx,configuration-r4-1 = <0xc>;
+ xlnx,configuration-r4-2 = <0xd>;
+ xlnx,configuration-r4-3 = <0xe>;
+ xlnx,configuration-r4-4 = <0x8>;
+ xlnx,configuration-slave0-ssit-r3 = <0xf>;
+ xlnx,configuration-slave0-ssit-r4-1 = <0xc>;
+ xlnx,configuration-slave0-ssit-r4-2 = <0xd>;
+ xlnx,configuration-slave0-ssit-r4-3 = <0xe>;
+ xlnx,configuration-slave0-ssit-r4-4 = <0x8>;
+ xlnx,configuration-slave1-ssit-r3 = <0xf>;
+ xlnx,configuration-slave1-ssit-r4-1 = <0xc>;
+ xlnx,configuration-slave1-ssit-r4-2 = <0xd>;
+ xlnx,configuration-slave1-ssit-r4-3 = <0xe>;
+ xlnx,configuration-slave1-ssit-r4-4 = <0x8>;
+ xlnx,configuration-slave2-ssit-r3 = <0xf>;
+ xlnx,configuration-slave2-ssit-r4-1 = <0xc>;
+ xlnx,configuration-slave2-ssit-r4-2 = <0xd>;
+ xlnx,configuration-slave2-ssit-r4-3 = <0xe>;
+ xlnx,configuration-slave2-ssit-r4-4 = <0x8>;
+ xlnx,dclk-frequency = <0x64>;
+ xlnx,dual-seq = <0x0>;
+ xlnx,dual-sequence-r0 = <0x0>;
+ xlnx,dual-sequence-r1 = <0x0>;
+ xlnx,dual-sequence-r2 = <0x0>;
+ xlnx,dual0-register = <0x0>;
+ xlnx,dual1-register = <0x0>;
+ xlnx,dual2-register = <0x0>;
+ xlnx,dual3-register = <0x0>;
+ xlnx,enable-adc-data-out-master = <0x0>;
+ xlnx,enable-adc-data-out-slave0 = <0x0>;
+ xlnx,enable-adc-data-out-slave1 = <0x0>;
+ xlnx,enable-adc-data-out-slave2 = <0x0>;
+ xlnx,enable-dual-sequence-mode = <0x0>;
+ xlnx,enable-slave0 = <0x0>;
+ xlnx,enable-slave1 = <0x0>;
+ xlnx,enable-slave2 = <0x0>;
+ xlnx,external-mux-channel = "VP_VN";
+ xlnx,external-muxaddr-enable = <0x0>;
+ xlnx,fifo-depth = <0x7>;
+ xlnx,has-axi = <0x1>;
+ xlnx,has-axi4stream = <0x0>;
+ xlnx,has-busy = <0x1>;
+ xlnx,has-channel = <0x1>;
+ xlnx,has-convst = <0x0>;
+ xlnx,has-convstclk = <0x0>;
+ xlnx,has-dclk = <0x1>;
+ xlnx,has-drp = <0x0>;
+ xlnx,has-eoc = <0x1>;
+ xlnx,has-eos = <0x1>;
+ xlnx,has-external-mux = <0x0>;
+ xlnx,has-i2c = <0x0>;
+ xlnx,has-i2c-slave = <0x0>;
+ xlnx,has-jtagbusy = <0x0>;
+ xlnx,has-jtaglocked = <0x0>;
+ xlnx,has-jtagmodified = <0x0>;
+ xlnx,has-ot-alarm = <0x1>;
+ xlnx,has-pmbus = <0x0>;
+ xlnx,has-pmc = <0x0>;
+ xlnx,has-pmc-master = <0x0>;
+ xlnx,has-reset = <0x0>;
+ xlnx,has-slave0-ssit-temp-ch = <0x1>;
+ xlnx,has-slave0-ssit-vuser0 = <0x0>;
+ xlnx,has-slave0-ssit-vuser1 = <0x0>;
+ xlnx,has-slave0-ssit-vuser2 = <0x0>;
+ xlnx,has-slave0-ssit-vuser3 = <0x0>;
+ xlnx,has-slave1-ssit-temp-ch = <0x1>;
+ xlnx,has-slave1-ssit-vuser0 = <0x0>;
+ xlnx,has-slave1-ssit-vuser1 = <0x0>;
+ xlnx,has-slave1-ssit-vuser2 = <0x0>;
+ xlnx,has-slave1-ssit-vuser3 = <0x0>;
+ xlnx,has-slave2-ssit-temp-ch = <0x1>;
+ xlnx,has-slave2-ssit-vuser0 = <0x0>;
+ xlnx,has-slave2-ssit-vuser1 = <0x0>;
+ xlnx,has-slave2-ssit-vuser2 = <0x0>;
+ xlnx,has-slave2-ssit-vuser3 = <0x0>;
+ xlnx,has-temp-bus = <0x0>;
+ xlnx,has-user-supply0-alarm = <0x0>;
+ xlnx,has-user-supply0-slave0-ssit-alarm = <0x0>;
+ xlnx,has-user-supply0-slave1-ssit-alarm = <0x0>;
+ xlnx,has-user-supply0-slave2-ssit-alarm = <0x0>;
+ xlnx,has-user-supply1-alarm = <0x0>;
+ xlnx,has-user-supply1-slave0-ssit-alarm = <0x0>;
+ xlnx,has-user-supply1-slave1-ssit-alarm = <0x0>;
+ xlnx,has-user-supply1-slave2-ssit-alarm = <0x0>;
+ xlnx,has-user-supply2-alarm = <0x0>;
+ xlnx,has-user-supply2-slave0-ssit-alarm = <0x0>;
+ xlnx,has-user-supply2-slave1-ssit-alarm = <0x0>;
+ xlnx,has-user-supply2-slave2-ssit-alarm = <0x0>;
+ xlnx,has-user-supply3-alarm = <0x0>;
+ xlnx,has-user-supply3-slave0-ssit-alarm = <0x0>;
+ xlnx,has-user-supply3-slave1-ssit-alarm = <0x0>;
+ xlnx,has-user-supply3-slave2-ssit-alarm = <0x0>;
+ xlnx,has-user-temp-alarm = <0x1>;
+ xlnx,has-vbram-alarm = <0x0>;
+ xlnx,has-vccaux-alarm = <0x1>;
+ xlnx,has-vccddro-alarm = <0x0>;
+ xlnx,has-vccint-alarm = <0x1>;
+ xlnx,has-vccpaux-alarm = <0x0>;
+ xlnx,has-vccpint-alarm = <0x0>;
+ xlnx,has-vccpsaux-alarm = <0x0>;
+ xlnx,has-vccpsintfp-alarm = <0x0>;
+ xlnx,has-vccpsintlp-alarm = <0x0>;
+ xlnx,has-vn = <0x1>;
+ xlnx,has-vp = <0x1>;
+ xlnx,has-vuser0 = <0x0>;
+ xlnx,has-vuser1 = <0x0>;
+ xlnx,has-vuser2 = <0x0>;
+ xlnx,has-vuser3 = <0x0>;
+ xlnx,i2c-clk-period = "2500.000";
+ xlnx,i2c-sclk-loc = "K9";
+ xlnx,i2c-sda-loc = "H9";
+ xlnx,i2c-slave-address = <0x20>;
+ xlnx,i2c-slave0-address = <0x20>;
+ xlnx,i2c-slave1-address = <0x20>;
+ xlnx,i2c-slave2-address = <0x20>;
+ xlnx,include-intr = <0x1>;
+ xlnx,is-diablo = <0x1>;
+ xlnx,is-ssit-slave0 = <0x0>;
+ xlnx,is-ssit-slave0-analog-bank = <0x0>;
+ xlnx,is-ssit-slave1 = <0x0>;
+ xlnx,is-ssit-slave1-analog-bank = <0x0>;
+ xlnx,is-ssit-slave2 = <0x0>;
+ xlnx,is-ssit-slave2-analog-bank = <0x0>;
+ xlnx,sampling-rate = "192307.6923076923";
+ xlnx,sequence-r0 = <0x4701>;
+ xlnx,sequence-r1 = <0x3f>;
+ xlnx,sequence-r2 = <0x0>;
+ xlnx,sequence-r3 = <0x0>;
+ xlnx,sequence-r4 = <0x0>;
+ xlnx,sequence-r5 = <0x0>;
+ xlnx,sequence-r6 = <0x0>;
+ xlnx,sequence-r7 = <0x0>;
+ xlnx,sequence-r8 = <0x0>;
+ xlnx,sequence-slave0-ssit-r0 = <0x100>;
+ xlnx,sequence-slave0-ssit-r8 = <0x0>;
+ xlnx,sequence-slave1-ssit-r0 = <0x100>;
+ xlnx,sequence-slave1-ssit-r8 = <0x0>;
+ xlnx,sequence-slave2-ssit-r0 = <0x100>;
+ xlnx,sequence-slave2-ssit-r8 = <0x0>;
+ xlnx,sim-device = "ZYNQ_ULTRASCALE";
+ xlnx,sim-file-name = "design";
+ xlnx,sim-file-rel-path = "./";
+ xlnx,sim-file-sel = "Default";
+ xlnx,user-supply0-bank = <0x2c>;
+ xlnx,user-supply0-slave0-ssit-bank = <0x2c>;
+ xlnx,user-supply0-slave0-ssit-source = "VCCO";
+ xlnx,user-supply0-slave1-ssit-bank = <0x2c>;
+ xlnx,user-supply0-slave1-ssit-source = "VCCO";
+ xlnx,user-supply0-slave2-ssit-bank = <0x2c>;
+ xlnx,user-supply0-slave2-ssit-source = "VCCO";
+ xlnx,user-supply0-source = "VCCO";
+ xlnx,user-supply1-bank = <0x2c>;
+ xlnx,user-supply1-slave0-ssit-bank = <0x2c>;
+ xlnx,user-supply1-slave0-ssit-source = "VCCINT";
+ xlnx,user-supply1-slave1-ssit-bank = <0x2c>;
+ xlnx,user-supply1-slave1-ssit-source = "VCCINT";
+ xlnx,user-supply1-slave2-ssit-bank = <0x2c>;
+ xlnx,user-supply1-slave2-ssit-source = "VCCINT";
+ xlnx,user-supply1-source = "VCCINT";
+ xlnx,user-supply2-bank = <0x2c>;
+ xlnx,user-supply2-slave0-ssit-bank = <0x2c>;
+ xlnx,user-supply2-slave0-ssit-source = "VCCAUX";
+ xlnx,user-supply2-slave1-ssit-bank = <0x2c>;
+ xlnx,user-supply2-slave1-ssit-source = "VCCAUX";
+ xlnx,user-supply2-slave2-ssit-bank = <0x2c>;
+ xlnx,user-supply2-slave2-ssit-source = "VCCAUX";
+ xlnx,user-supply2-source = "VCCAUX";
+ xlnx,user-supply3-bank = <0x41>;
+ xlnx,user-supply3-slave0-ssit-bank = <0x41>;
+ xlnx,user-supply3-slave0-ssit-source = "VCCO";
+ xlnx,user-supply3-slave1-ssit-bank = <0x41>;
+ xlnx,user-supply3-slave1-ssit-source = "VCCO";
+ xlnx,user-supply3-slave2-ssit-bank = <0x41>;
+ xlnx,user-supply3-slave2-ssit-source = "VCCO";
+ xlnx,user-supply3-source = "VCCO";
+ xlnx,vaux0 = <0x1>;
+ xlnx,vaux1 = <0x1>;
+ xlnx,vaux10 = <0x0>;
+ xlnx,vaux11 = <0x0>;
+ xlnx,vaux12 = <0x0>;
+ xlnx,vaux13 = <0x0>;
+ xlnx,vaux14 = <0x0>;
+ xlnx,vaux15 = <0x0>;
+ xlnx,vaux2 = <0x1>;
+ xlnx,vaux3 = <0x1>;
+ xlnx,vaux4 = <0x1>;
+ xlnx,vaux5 = <0x1>;
+ xlnx,vaux6 = <0x0>;
+ xlnx,vaux7 = <0x0>;
+ xlnx,vaux8 = <0x0>;
+ xlnx,vaux9 = <0x0>;
+ xlnx,vauxn0-loc = "AF2";
+ xlnx,vauxn1-loc = "AH3";
+ xlnx,vauxn10-loc = "AC2";
+ xlnx,vauxn11-loc = "AB3";
+ xlnx,vauxn12-loc = "AH7";
+ xlnx,vauxn13-loc = "AH9";
+ xlnx,vauxn14-loc = "AC7";
+ xlnx,vauxn15-loc = "AC8";
+ xlnx,vauxn2-loc = "AC1";
+ xlnx,vauxn3-loc = "AD1";
+ xlnx,vauxn4-loc = "AG5";
+ xlnx,vauxn5-loc = "AG8";
+ xlnx,vauxn6-loc = "AC6";
+ xlnx,vauxn7-loc = "AE7";
+ xlnx,vauxn8-loc = "AF3";
+ xlnx,vauxn9-loc = "AH4";
+ xlnx,vauxp0-loc = "AE2";
+ xlnx,vauxp1-loc = "AG3";
+ xlnx,vauxp10-loc = "AB2";
+ xlnx,vauxp11-loc = "AB4";
+ xlnx,vauxp12-loc = "AH8";
+ xlnx,vauxp13-loc = "AG9";
+ xlnx,vauxp14-loc = "AB7";
+ xlnx,vauxp15-loc = "AB8";
+ xlnx,vauxp2-loc = "AB1";
+ xlnx,vauxp3-loc = "AD2";
+ xlnx,vauxp4-loc = "AG6";
+ xlnx,vauxp5-loc = "AF8";
+ xlnx,vauxp6-loc = "AB6";
+ xlnx,vauxp7-loc = "AD7";
+ xlnx,vauxp8-loc = "AE3";
+ xlnx,vauxp9-loc = "AG4";
+ xlnx,vpvn = <0x0>;
+ };
+ psu_ctrl_ipi: PERIPHERAL@ff380000 {
+ compatible = "xlnx,PERIPHERAL-1.0";
+ reg = <0x0 0xff380000 0x0 0x80000>;
+ };
+ psu_message_buffers: PERIPHERAL@ff990000 {
+ compatible = "xlnx,PERIPHERAL-1.0";
+ reg = <0x0 0xff990000 0x0 0x10000>;
+ };
+ misc_clk_0: misc_clk_0 {
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ compatible = "fixed-clock";
+ };
+ tm_dma {
+ compatible = "xlnx,tm-drv";
+ reg = <0x0 0x80200000 0x0 0x4000 0x0 0x80280000 0x0 0x4000>;
+ interrupt-parent = <0x4>;
+ interrupts = <0x0 0x6c 0x4>;
+ };
+ tm_veth {
+ compatible = "xlnx,tm-veth";
+ reg = <0x0 0x80200000 0x0 0x4000 0x0 0x80280000 0x0 0x4000>;
+ interrupt-parent = <0x4>;
+ interrupts = <0x0 0x6d 0x4>;
+ };
+ };
+};
+
+/*
+ ********************* PCW / SYS *********************
+ */
+
+&lpd_dma_chan1 {
+ status = "okay";
+};
+
+&lpd_dma_chan2 {
+ status = "okay";
+};
+
+&lpd_dma_chan3 {
+ status = "okay";
+};
+
+&lpd_dma_chan4 {
+ status = "okay";
+};
+
+&lpd_dma_chan5 {
+ status = "okay";
+};
+
+&lpd_dma_chan6 {
+ status = "okay";
+};
+
+&lpd_dma_chan7 {
+ status = "okay";
+};
+
+&lpd_dma_chan8 {
+ status = "okay";
+};
+
+&fpd_dma_chan1 {
+ status = "okay";
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+};
+
+&gpio {
+ emio-gpio-width = <32>;
+ gpio-mask-high = <0x0>;
+ gpio-mask-low = <0x5600>;
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+ xlnx,pcie-mode = "Root Port";
+};
+
+&spi0 {
+ is-decoded-cs = <0>;
+ num-cs = <0x1>;
+ status = "okay";
+};
+
+&spi1 {
+ is-decoded-cs = <0>;
+ num-cs = <0x1>;
+ status = "okay";
+};
+
+&pss_ref_clk {
+ clock-frequency = <50000000>;
+};
+
+&rtc {
+ status= "disabled";
+};
+
+&watchdog0 {
+ status = "okay";
+ /delete-property/ reset-on-timeout;
+};
+
+&sdhci0 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ xlnx,mio_bank = <0x0>;
+};
+
+&sdhci1 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ xlnx,mio_bank = <0x1>;
+};
+
+&uart0 {
+ device_type = "serial";
+ port-number = <0>;
+ status = "okay";
+};
+
+&uart1 {
+ device_type = "serial";
+ port-number = <1>;
+ status = "disabled";
+};
+
+&usb0 {
+ status = "okay";
+ xlnx,usb-reset = <0x2faf080>;
+ clock-names = "bus_clk";
+ clocks = <0x3 0x20>;
+
+};
+
+&gem0 {
+ phy-mode = "gmii";
+ status = "okay";
+ xlnx,ptp-enet-clock = <0x0>;
+};
+
+&gem1 {
+ is-internal-pcspma ;
+ phy-mode = "sgmii";
+ status = "okay";
+ xlnx,ptp-enet-clock = <0x0>;
+};
+
+&gem2 {
+ phy-mode = "gmii";
+ status = "okay";
+ xlnx,ptp-enet-clock = <0x0>;
+};
+
+&gem3 {
+ phy-mode = "gmii";
+ status = "okay";
+ xlnx,ptp-enet-clock = <0x0>;
+ local-mac-address = [00 0a 35 00 22 01];
+};
+
+&sata {
+
+};
+
+/* These nodes have not been upstreamed by Xilinx yet.
+&gpu {
+ status = "disabled";
+};
+
+&pinctrl0 {
+ status = "okay";
+};
+
+&serdes {
+ status = "okay";
+};
+
+&ams_ps {
+ status = "okay";
+};
+
+&ams_pl {
+ status = "okay";
+};
+
+&dwc3_0 {
+ status = "okay";
+ snps,dis_u2_susphy_quirk;
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ phy-names = "usb3-phy";
+ phys = <&lane2 0x4 0x0 0x2 0x5f5e100>;
+
+};
+
+&xilinx_ams {
+ status = "okay";
+};
+
+&qspi {
+ is-dual = <0>;
+ num-cs = <0x1>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ flash0: flash@0 {
+ compatible = "n25q512a", "micron,m25p80";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <108000000>;
+ partition@0x00000000 {
+ label = "boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@0x00100000 {
+ label = "bootenv";
+ reg = <0x00100000 0x00040000>;
+ };
+ partition@0x00140000 {
+ label = "kernel";
+ reg = <0x00140000 0x01600000>;
+ };
+ };
+};
+*/
+
+&design_1_i_axi_iic_SUP {
+ lm75@48 {
+ compatible = "lm75";
+ reg = <0x48>;
+ };
+ ds1337@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+};
+
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+ gpio1@74 {
+ compatible = "i2c-pca9539";
+ reg = <0x74>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ status = "okay";
+ gpio2@74 {
+ compatible = "i2c-pca9539";
+ reg = <0x74>;
+ };
+ gpio3@20 {
+ compatible = "i2c-pca8575";
+ reg = <0x20>;
+ };
+};
+
+&amba {
+ shm@0 {
+ compatible = "shm_uio";
+ reg = <0x0 0x3ed80000 0x0 0x800000>;
+ };
+
+ ipi@ff340000 {
+ compatible = "ipi_uio";
+ reg = <0x0 0xff340000 0x0 0x1000>;
+ interrupt-parent = <0x2>;
+ interrupts = <0x0 0x1d 0x4>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <1>;
+ spidev@0 {
+ compatible = "cisco,spi-petra";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ };
+};
+
+&spi1 {
+ status = "okay";
+ spidev@1 {
+ compatible = "cisco,spi-petra";
+ reg = <0x0>;
+ spi-max-frequency = <0xf4240>;
+ };
+};
+
+&design_1_i_axi_quad_spi_lc3 {
+ status = "okay";
+ device@0 {
+ compatible = "cisco,spi-petra";
+ reg = <0>; //Chip select 0
+ spi-max-frequency = <3125000>;
+ };
+};
+
+&gem0 {
+ status = "disabled";
+};
+
+&gem1 {
+ status = "disabled";
+};
+
+&gem2 {
+ status = "disabled";
+};
+
+&gem3 {
+ status = "disabled";
+};
+
+/ {
+ chosen {
+ bootargs = "earlycon console=ttyPS0,9600n8 clk_ignore_unused cpuidle.off=1";
+ stdout-path = "serial0:9600n8";
+ };
+ aliases {
+ ethernet0 = &gem0;
+ ethernet1 = &gem1;
+ ethernet2 = &gem2;
+ ethernet3 = &gem3;
+ serial0 = &uart0;
+ spi0 = &design_1_i_axi_quad_spi_LED;
+ spi1 = &design_1_i_axi_quad_spi_lc3;
+ // spi2 = &qspi;
+ spi3 = &spi0;
+ spi4 = &spi1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &design_1_i_axi_iic_LC1;
+ i2c3 = &design_1_i_axi_iic_LC2;
+ i2c4 = &design_1_i_axi_iic_LC3;
+ i2c5 = &design_1_i_axi_iic_PS;
+ i2c6 = &design_1_i_axi_iic_BP;
+ i2c7 = &design_1_i_axi_iic_SUP;
+ i2c8 = &design_1_i_axi_iic_KM_PLT;
+ };
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x0 0x0 0x80000000>;
+ };
+};
--
2.17.1
next reply other threads:[~2021-01-21 23:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-21 23:12 Daniel Walker [this message]
2021-01-21 23:58 ` [PATCH 1/2] arm64: boot: dts: add new dts for hellcat & petra Marcel Ziswiler
2021-01-22 8:48 ` Michal Simek
2021-01-22 20:32 ` Daniel Walker (danielwa)
2021-01-25 7:52 ` Michal Simek
2021-01-25 21:04 ` Daniel Walker (danielwa)
2021-01-26 9:16 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210121231237.30664-1-danielwa@cisco.com \
--to=danielwa@cisco.com \
--cc=devicetree@vger.kernel.org \
--cc=dwalker@fifo99.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=xe-linux-external@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).