[1/2] arm64: dts: ti: k3-j7200-main: Add support for HS200 and HS400 modes in MMCSD0 subsystem
diff mbox series

Message ID 20210122162403.20700-2-a-govindraju@ti.com
State New, archived
Headers show
Series
  • mmc: J7200: Add support for higher speed modes in MMCSD subsystems
Related show

Commit Message

Aswath Govindraju Jan. 22, 2021, 4:24 p.m. UTC
HS200 and HS400 modes at 1.8 V card voltage, are now supported in MMCSD0
subsystem of J7200 SoC[1].

Set respective tags to indicate it.

[1] - https://www.ti.com/lit/ug/spruiu1a/spruiu1a.pdf

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 ++
 1 file changed, 2 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 4cc2e9094d0e..03486395e492 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -517,6 +517,8 @@ 
 		ti,trm-icp = <0x8>;
 		bus-width = <8>;
 		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
 		dma-coherent;
 	};