From: Aswath Govindraju <a-govindraju@ti.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Lokesh Vutla <lokeshvutla@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Aswath Govindraju <a-govindraju@ti.com>,
Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2] arm64: dts: ti: k3-j7200-main: Add support for HS200 and HS400 modes in MMCSD0 subsystem
Date: Fri, 22 Jan 2021 21:54:02 +0530 [thread overview]
Message-ID: <20210122162403.20700-2-a-govindraju@ti.com> (raw)
In-Reply-To: <20210122162403.20700-1-a-govindraju@ti.com>
HS200 and HS400 modes at 1.8 V card voltage, are now supported in MMCSD0
subsystem of J7200 SoC[1].
Set respective tags to indicate it.
[1] - https://www.ti.com/lit/ug/spruiu1a/spruiu1a.pdf
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 4cc2e9094d0e..03486395e492 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -517,6 +517,8 @@
ti,trm-icp = <0x8>;
bus-width = <8>;
mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
dma-coherent;
};
--
2.17.1
next prev parent reply other threads:[~2021-01-22 16:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-22 16:24 [PATCH 0/2] mmc: J7200: Add support for higher speed modes in MMCSD subsystems Aswath Govindraju
2021-01-22 16:24 ` Aswath Govindraju [this message]
2021-01-22 16:24 ` [PATCH 2/2] arm64: dts: ti: k3-j7200-main: Add support for UHS-I modes in MMCSD1 subsystem Aswath Govindraju
2021-01-22 18:06 ` [PATCH 0/2] mmc: J7200: Add support for higher speed modes in MMCSD subsystems Nishanth Menon
2021-01-25 13:42 ` Aswath Govindraju
2021-01-25 13:51 ` Nishanth Menon
2021-01-25 14:13 ` Aswath Govindraju
2021-01-25 14:18 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210122162403.20700-2-a-govindraju@ti.com \
--to=a-govindraju@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).