[net-next PATCH v4 12/15] net/fsl: Use fwnode_mdiobus_register()

From: Calvin Johnson <calvin.johnson@oss.nxp.com>
To: Grant Likely <grant.likely@arm.com>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Jeremy Linton <jeremy.linton@arm.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Russell King - ARM Linux admin <linux@armlinux.org.uk>,
	Cristi Sovaiala <cristian.sovaiala@nxp.com>,
	Florin Laurentiu Chiculita <florinlaurentiu.chiculita@nxp.com>,
	Ioana Ciornei <ioana.ciornei@nxp.com>,
	Madalin Bucur <madalin.bucur@oss.nxp.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Marcin Wojtas <mw@semihalf.com>,
	Pieter Jansen Van Vuuren <pieter.jansenvv@bamboosystems.io>,
	Jon <jon@solid-run.com>, Saravana Kannan <saravanak@google.com>,
	Randy Dunlap <rdunlap@infradead.org>
Cc: linux.cj@gmail.com,
	Diana Madalina Craciun <diana.craciun@nxp.com>,
	linux-acpi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	Laurentiu Tudor <laurentiu.tudor@nxp.com>,
	Calvin Johnson <calvin.johnson@oss.nxp.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Jamie Iles <jamie@nuviainc.com>
Subject: [net-next PATCH v4 12/15] net/fsl: Use fwnode_mdiobus_register()
Date: Fri, 22 Jan 2021 21:12:57 +0530	[thread overview]
Message-ID: <20210122154300.7628-13-calvin.johnson@oss.nxp.com> (raw)
In-Reply-To: <20210122154300.7628-1-calvin.johnson@oss.nxp.com>

fwnode_mdiobus_register() internally takes care of both DT
and ACPI cases to register mdiobus. Replace existing
of_mdiobus_register() with fwnode_mdiobus_register().

Note: For both ACPI and DT cases, endianness of MDIO controller
need to be specified using "little-endian" property.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v4:
- Cleanup xgmac_mdio_probe()

Changes in v3:
- Avoid unnecessary line removal
- Remove unused inclusion of acpi.h

Changes in v2: None

 drivers/net/ethernet/freescale/xgmac_mdio.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index bfa2826c5545..dca5305e7185 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -2,6 +2,7 @@
  * QorIQ 10G MDIO Controller
  *
  * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
  *
  * Authors: Andy Fleming <afleming@freescale.com>
  *          Timur Tabi <timur@freescale.com>
@@ -243,10 +244,9 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
 
 static int xgmac_mdio_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
-	struct mii_bus *bus;
-	struct resource *res;
 	struct mdio_fsl_priv *priv;
+	struct resource *res;
+	struct mii_bus *bus;
 	int ret;
 
 	/* In DPAA-1, MDIO is one of the many FMan sub-devices. The FMan
@@ -279,13 +279,16 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
 		goto err_ioremap;
 	}
 
+	/* For both ACPI and DT cases, endianness of MDIO controller
+	 * needs to be specified using "little-endian" property.
+	 */
 	priv->is_little_endian = device_property_read_bool(&pdev->dev,
 							   "little-endian");
 
 	priv->has_a011043 = device_property_read_bool(&pdev->dev,
 						      "fsl,erratum-a011043");
 
-	ret = of_mdiobus_register(bus, np);
+	ret = fwnode_mdiobus_register(bus, pdev->dev.fwnode);
 	if (ret) {
 		dev_err(&pdev->dev, "cannot register MDIO bus\n");
 		goto err_registration;
-- 
2.17.1

