From: <stefanc@marvell.com>
To: <netdev@vger.kernel.org>
Cc: <thomas.petazzoni@bootlin.com>, <davem@davemloft.net>,
<nadavh@marvell.com>, <ymarkman@marvell.com>,
<linux-kernel@vger.kernel.org>, <stefanc@marvell.com>,
<kuba@kernel.org>, <linux@armlinux.org.uk>, <mw@semihalf.com>,
<andrew@lunn.ch>, <rmk+kernel@armlinux.org.uk>,
<atenart@kernel.org>
Subject: [PATCH v2 RFC net-next 11/18] net: mvpp2: enable global flow control
Date: Sun, 24 Jan 2021 13:44:00 +0200 [thread overview]
Message-ID: <1611488647-12478-12-git-send-email-stefanc@marvell.com> (raw)
In-Reply-To: <1611488647-12478-1-git-send-email-stefanc@marvell.com>
From: Stefan Chulski <stefanc@marvell.com>
This patch enables global flow control in FW and in the phylink validate mask.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 3 +++
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 20 +++++++++++++++++++-
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 4d58af6..4c8e422 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -1022,6 +1022,9 @@ struct mvpp2 {
/* CM3 SRAM pool */
struct gen_pool *sram_pool;
+ /* Global TX Flow Control config */
+ bool global_tx_fc;
+
bool custom_dma_mask;
/* Spinlocks for CM3 shared memory configuration */
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 32c79c50..d79c687 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -5962,6 +5962,11 @@ static void mvpp2_phylink_validate(struct phylink_config *config,
phylink_set(mask, Autoneg);
phylink_set_port_modes(mask);
+ if (port->priv->global_tx_fc) {
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
+ }
+
switch (state->interface) {
case PHY_INTERFACE_MODE_10GBASER:
case PHY_INTERFACE_MODE_XAUI:
@@ -6977,7 +6982,7 @@ static int mvpp2_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *base;
int i, shared;
- int err;
+ int err, val;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -7031,6 +7036,10 @@ static int mvpp2_probe(struct platform_device *pdev)
return err;
else if (err)
dev_warn(&pdev->dev, "Fail to alloc CM3 SRAM\n");
+
+ /* Enable global Flow Control only if handler to SRAM not NULL */
+ if (priv->cm3_base)
+ priv->global_tx_fc = true;
}
if (priv->hw_version != MVPP21 && dev_of_node(&pdev->dev)) {
@@ -7201,6 +7210,15 @@ static int mvpp2_probe(struct platform_device *pdev)
goto err_port_probe;
}
+ /* Enable global flow control. In this stage global
+ * flow control enabled, but still disabled per port.
+ */
+ if (priv->global_tx_fc && priv->hw_version != MVPP21) {
+ val = mvpp2_cm3_read(priv, MSS_FC_COM_REG);
+ val |= FLOW_CONTROL_ENABLE_BIT;
+ mvpp2_cm3_write(priv, MSS_FC_COM_REG, val);
+ }
+
mvpp2_dbgfs_init(priv, pdev->name);
platform_set_drvdata(pdev, priv);
--
1.9.1
next prev parent reply other threads:[~2021-01-24 11:58 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-24 11:43 [PATCH v2 RFC net-next 00/18] net: mvpp2: Add TX Flow Control support stefanc
2021-01-24 11:43 ` [PATCH v2 RFC net-next 01/18] doc: marvell: add cm3-mem device tree bindings description stefanc
2021-01-24 11:43 ` [PATCH v2 RFC net-next 02/18] dts: marvell: add CM3 SRAM memory to cp115 ethernet device tree stefanc
2021-01-24 11:43 ` [PATCH v2 RFC net-next 03/18] net: mvpp2: add CM3 SRAM memory map stefanc
2021-01-24 12:28 ` Russell King - ARM Linux admin
2021-01-24 12:44 ` Russell King - ARM Linux admin
2021-01-24 18:51 ` Andrew Lunn
2021-01-24 18:46 ` Andrew Lunn
2021-01-25 7:16 ` [EXT] " Stefan Chulski
2021-01-24 11:43 ` [PATCH v2 RFC net-next 04/18] net: mvpp2: add PPv23 version definition stefanc
2021-01-24 13:18 ` Russell King - ARM Linux admin
2021-01-24 13:55 ` [EXT] " Stefan Chulski
2021-01-24 19:03 ` Andrew Lunn
2021-01-25 7:12 ` Stefan Chulski
2021-01-24 11:43 ` [PATCH v2 RFC net-next 05/18] net: mvpp2: always compare hw-version vs MVPP21 stefanc
2021-01-24 11:43 ` [PATCH v2 RFC net-next 06/18] net: mvpp2: increase BM pool size to 2048 buffers stefanc
2021-01-24 11:43 ` [PATCH v2 RFC net-next 07/18] net: mvpp2: increase RXQ size to 1024 descriptors stefanc
2021-01-24 11:43 ` [PATCH v2 RFC net-next 08/18] net: mvpp2: add FCA periodic timer configurations stefanc
2021-01-24 12:14 ` Russell King - ARM Linux admin
2021-01-24 14:43 ` [EXT] " Stefan Chulski
2021-01-24 19:11 ` Andrew Lunn
2021-01-25 7:15 ` Stefan Chulski
2021-01-24 11:43 ` [PATCH v2 RFC net-next 09/18] net: mvpp2: add FCA RXQ non occupied descriptor threshold stefanc
2021-01-24 13:01 ` Russell King - ARM Linux admin
2021-01-24 13:24 ` [EXT] " Stefan Chulski
2021-01-24 11:43 ` [PATCH v2 RFC net-next 10/18] net: mvpp2: add spinlock for FW FCA configuration path stefanc
2021-01-24 11:44 ` stefanc [this message]
2021-01-24 11:44 ` [PATCH v2 RFC net-next 12/18] net: mvpp2: add RXQ flow control configurations stefanc
2021-01-24 11:44 ` [PATCH v2 RFC net-next 13/18] net: mvpp2: add ethtool flow control configuration support stefanc
2021-01-24 12:35 ` Russell King - ARM Linux admin
2021-01-24 12:39 ` [EXT] " Stefan Chulski
2021-01-24 11:44 ` [PATCH v2 RFC net-next 14/18] net: mvpp2: add BM protection underrun feature support stefanc
2021-01-24 11:44 ` [PATCH v2 RFC net-next 15/18] net: mvpp2: add PPv23 RX FIFO flow control stefanc
2021-01-24 11:44 ` [PATCH v2 RFC net-next 16/18] net: mvpp2: set 802.3x GoP Flow Control mode stefanc
2021-01-24 11:44 ` [PATCH v2 RFC net-next 17/18] net: mvpp2: limit minimum ring size to 1024 descriptors stefanc
2021-01-24 11:44 ` [PATCH v2 RFC net-next 18/18] net: mvpp2: add TX FC firmware check stefanc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1611488647-12478-12-git-send-email-stefanc@marvell.com \
--to=stefanc@marvell.com \
--cc=andrew@lunn.ch \
--cc=atenart@kernel.org \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=thomas.petazzoni@bootlin.com \
--cc=ymarkman@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).