From: Iskren Chernev <iskren.chernev@gmail.com>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Iskren Chernev <iskren.chernev@gmail.com>,
~postmarketos/upstreaming@lists.sr.ht,
Samuel Pascua <pascua.samuel.14@gmail.com>,
Alexey Minnekhanov <alexeymin@postmarketos.org>,
Brian Masney <masneyb@onstation.org>
Subject: [PATCH 1/4] ARM: dts: qcom: msm8974: add gpu support
Date: Sun, 24 Jan 2021 15:56:07 +0200 [thread overview]
Message-ID: <20210124135610.1779295-1-iskren.chernev@gmail.com> (raw)
From: Brian Masney <masneyb@onstation.org>
Add support for the a3xx GPU
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Brian Masney <masneyb@onstation.org>
---
Changes in v2:
- base set to next-20210122
- add tags from v1 replies
- add Signed-off-by: me on first three patches
- add commit message to 2nd patch
v1: https://lkml.org/lkml/2020/12/30/322
arch/arm/boot/dts/qcom-msm8974.dtsi | 45 +++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 51f5f904f9eb9..c399446d8154e 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1399,6 +1399,51 @@ cnoc: interconnect@fc480000 {
<&rpmcc RPM_SMD_CNOC_A_CLK>;
};
+ gpu_opp_table: opp_table {
+ status = "disabled";
+
+ compatible = "operating-points-v2";
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ };
+
+ opp-275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ };
+ };
+
+ gpu: adreno@fdb00000 {
+ status = "disabled";
+
+ compatible = "qcom,adreno-330.2",
+ "qcom,adreno";
+ reg = <0xfdb00000 0x10000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names = "core",
+ "iface",
+ "mem_iface";
+ clocks = <&mmcc OXILI_GFX3D_CLK>,
+ <&mmcc OXILICX_AHB_CLK>,
+ <&mmcc OXILICX_AXI_CLK>;
+ sram = <&gmu_sram>;
+ power-domains = <&mmcc OXILICX_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+
+ interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
+ <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
+ interconnect-names = "gfx-mem",
+ "ocmem";
+
+ // iommus = <&gpu_iommu 0>;
+ };
+
mdss: mdss@fd900000 {
status = "disabled";
base-commit: 226871e2eda4832d94c3239add7e52ad17b81ce5
--
2.30.0
next reply other threads:[~2021-01-24 13:58 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-24 13:56 Iskren Chernev [this message]
2021-01-24 13:56 ` [PATCH 2/4] ARM: dts: qcom: msm8974-klte: add support for GPU Iskren Chernev
2021-01-24 15:02 ` Konrad Dybcio
2021-01-24 13:56 ` [PATCH 3/4] ARM: dts: qcom: msm8974-klte: add support for display Iskren Chernev
2021-01-24 15:04 ` Konrad Dybcio
2021-01-24 17:31 ` Luca Weiss
2021-01-24 17:33 ` Konrad Dybcio
2021-01-25 15:40 ` Bjorn Andersson
2021-01-25 15:47 ` Konrad Dybcio
2021-01-25 15:57 ` Bjorn Andersson
2021-01-24 13:56 ` [PATCH 4/4] ARM: dts: qcom: msm8974-klte: Mark essential regulators Iskren Chernev
2021-01-24 15:14 ` Konrad Dybcio
2021-01-24 14:56 ` [PATCH 1/4] ARM: dts: qcom: msm8974: add gpu support Konrad Dybcio
2021-01-25 0:09 ` Brian Masney
2021-01-24 21:05 ` Pavel Machek
2021-01-25 13:03 ` Iskren Chernev
-- strict thread matches above, loose matches on Subject: below --
2020-12-30 15:51 Iskren Chernev
2020-12-30 22:27 ` Brian Masney
2021-01-03 6:16 ` Alexey Minnekhanov
2021-01-22 18:33 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210124135610.1779295-1-iskren.chernev@gmail.com \
--to=iskren.chernev@gmail.com \
--cc=agross@kernel.org \
--cc=alexeymin@postmarketos.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=masneyb@onstation.org \
--cc=pascua.samuel.14@gmail.com \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).