linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vadym Kochan <vadym.kochan@plvision.eu>
To: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Oleksandr Mazur <oleksandr.mazur@plvision.eu>,
	Serhiy Boiko <serhiy.boiko@plvision.eu>,
	Serhiy Pshyk <serhiy.pshyk@plvision.eu>,
	Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>,
	Taras Chornyi <taras.chornyi@plvision.eu>,
	netdev@vger.kernel.org
Cc: Mickey Rachamim <mickeyr@marvell.com>,
	Vadym Kochan <vadym.kochan@plvision.eu>,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next 2/7] net: marvell: prestera: disable events interrupt while handling
Date: Wed,  3 Feb 2021 18:54:53 +0200	[thread overview]
Message-ID: <20210203165458.28717-3-vadym.kochan@plvision.eu> (raw)
In-Reply-To: <20210203165458.28717-1-vadym.kochan@plvision.eu>

There are change in firmware which requires that receiver will
disable event interrupts before handling them and enable them
after finish with handling. Events still may come into the queue
but without receiver interruption.

Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
---
 .../ethernet/marvell/prestera/prestera_pci.c  | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/net/ethernet/marvell/prestera/prestera_pci.c b/drivers/net/ethernet/marvell/prestera/prestera_pci.c
index b8a87d249647..f7b27ef02624 100644
--- a/drivers/net/ethernet/marvell/prestera/prestera_pci.c
+++ b/drivers/net/ethernet/marvell/prestera/prestera_pci.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
 /* Copyright (c) 2019-2020 Marvell International Ltd. All rights reserved */
 
+#include <linux/bitfield.h>
 #include <linux/circ_buf.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
@@ -144,6 +145,11 @@ struct prestera_fw_regs {
 /* PRESTERA_CMD_RCV_CTL_REG flags */
 #define PRESTERA_CMD_F_REPL_SENT	BIT(0)
 
+#define PRESTERA_FW_EVT_CTL_STATUS_MASK	GENMASK(1, 0)
+
+#define PRESTERA_FW_EVT_CTL_STATUS_ON	0
+#define PRESTERA_FW_EVT_CTL_STATUS_OFF	1
+
 #define PRESTERA_EVTQ_REG_OFFSET(q, f)			\
 	(PRESTERA_FW_REG_OFFSET(evtq_list) +		\
 	 (q) * sizeof(struct prestera_fw_evtq_regs) +	\
@@ -260,6 +266,15 @@ static u8 prestera_fw_evtq_pick(struct prestera_fw *fw)
 	return PRESTERA_EVT_QNUM_MAX;
 }
 
+static void prestera_fw_evt_ctl_status_set(struct prestera_fw *fw, u32 val)
+{
+	u32 status = prestera_fw_read(fw, PRESTERA_FW_STATUS_REG);
+
+	u32p_replace_bits(&status, val, PRESTERA_FW_EVT_CTL_STATUS_MASK);
+
+	prestera_fw_write(fw, PRESTERA_FW_STATUS_REG, status);
+}
+
 static void prestera_fw_evt_work_fn(struct work_struct *work)
 {
 	struct prestera_fw *fw;
@@ -269,6 +284,8 @@ static void prestera_fw_evt_work_fn(struct work_struct *work)
 	fw = container_of(work, struct prestera_fw, evt_work);
 	msg = fw->evt_msg;
 
+	prestera_fw_evt_ctl_status_set(fw, PRESTERA_FW_EVT_CTL_STATUS_OFF);
+
 	while ((qid = prestera_fw_evtq_pick(fw)) < PRESTERA_EVT_QNUM_MAX) {
 		u32 idx;
 		u32 len;
@@ -288,6 +305,8 @@ static void prestera_fw_evt_work_fn(struct work_struct *work)
 		if (fw->dev.recv_msg)
 			fw->dev.recv_msg(&fw->dev, msg, len);
 	}
+
+	prestera_fw_evt_ctl_status_set(fw, PRESTERA_FW_EVT_CTL_STATUS_ON);
 }
 
 static int prestera_fw_wait_reg32(struct prestera_fw *fw, u32 reg, u32 cmp,
-- 
2.17.1


  parent reply	other threads:[~2021-02-03 16:57 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-03 16:54 [PATCH net-next 0/7] Marvell Prestera Switchdev misc updates Vadym Kochan
2021-02-03 16:54 ` [PATCH net-next 1/7] net: marvell: prestera: bump supported firmware version to 2.5 Vadym Kochan
2021-02-03 16:54 ` Vadym Kochan [this message]
2021-02-05  5:10   ` [PATCH net-next 2/7] net: marvell: prestera: disable events interrupt while handling Jakub Kicinski
2021-02-05 11:28     ` Vadym Kochan
2021-02-03 16:54 ` [PATCH net-next 3/7] net: marvell: prestera: add support for AC3X 98DX3265 device Vadym Kochan
2021-02-03 16:54 ` [PATCH net-next 4/7] net: marvell: prestera: move netdev topology validation to prestera_main Vadym Kochan
2021-02-05 14:09   ` Vladimir Oltean
2021-02-03 16:54 ` [PATCH net-next 5/7] net: marvell: prestera: add LAG support Vadym Kochan
2021-02-05  5:16   ` Jakub Kicinski
2021-02-08 19:54     ` Tobias Waldekranz
2021-02-08 21:05       ` Jakub Kicinski
2021-02-08 22:30         ` Andrew Lunn
2021-02-09 12:37           ` Tobias Waldekranz
2021-02-09 11:56         ` Tobias Waldekranz
2021-02-09 17:48           ` Jakub Kicinski
2021-02-09 13:58         ` Andrew Lunn
2021-02-09 17:35           ` Jakub Kicinski
2021-02-09 20:31             ` [EXT] " Mickey Rachamim
2021-02-09 21:34               ` Tobias Waldekranz
2021-02-10 10:41                 ` Mickey Rachamim
2021-02-10 21:44                   ` Tobias Waldekranz
2021-02-10  0:28               ` Andrew Lunn
2021-02-10 10:42                 ` Mickey Rachamim
2021-02-10 19:25               ` Jakub Kicinski
2021-02-10 20:52             ` Taras Chornyi
2021-02-05 15:24   ` Vladimir Oltean
2021-02-03 16:54 ` [PATCH net-next 6/7] net: marvell: prestera: align flood setting according to latest firmware version Vadym Kochan
2021-02-03 16:54 ` [PATCH net-next 7/7] net: marvell: prestera: fix port event handling on init Vadym Kochan
2021-02-05  5:19   ` Jakub Kicinski
2021-02-05 12:31     ` Vadym Kochan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210203165458.28717-3-vadym.kochan@plvision.eu \
    --to=vadym.kochan@plvision.eu \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mickeyr@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=oleksandr.mazur@plvision.eu \
    --cc=serhiy.boiko@plvision.eu \
    --cc=serhiy.pshyk@plvision.eu \
    --cc=taras.chornyi@plvision.eu \
    --cc=volodymyr.mytnyk@plvision.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).