From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Andy Gross <agross@kernel.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH 6/6] arm64: dts: qcom: sm8350-mtp: add regulator names
Date: Thu, 4 Feb 2021 22:39:07 +0530 [thread overview]
Message-ID: <20210204170907.63545-7-vkoul@kernel.org> (raw)
In-Reply-To: <20210204170907.63545-1-vkoul@kernel.org>
Add the property "regulator-names" to the regulators as given in
schematics so that it is easier to understand the regulators being used
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 27 +++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
index 2675afbbd75e..e544fe6b421f 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -57,57 +57,67 @@ pm8350-rpmh-regulators {
vdd-l8-supply = <&vreg_s2c_0p8>;
vreg_s10b_1p8: smps10 {
+ regulator-name = "vreg_s10b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_s11b_0p95: smps11 {
+ regulator-name = "vreg_s11b_0p95";
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <1000000>;
};
vreg_s12b_1p25: smps12 {
+ regulator-name = "vreg_s12b_1p25";
regulator-min-microvolt = <1224000>;
regulator-max-microvolt = <1360000>;
};
vreg_l1b_0p88: ldo1 {
+ regulator-name = "vreg_l1b_0p88";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p07: ldo2 {
+ regulator-name = "vreg_l2b_3p07";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3b_0p9: ldo3 {
+ regulator-name = "vreg_l3b_0p9";
regulator-min-microvolt = <904000>;
regulator-max-microvolt = <904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5b_0p88: ldo5 {
+ regulator-name = "vreg_l3b_0p9";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <888000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p2: ldo6 {
+ regulator-name = "vreg_l6b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_2p96: ldo7 {
+ regulator-name = "vreg_l7b_2p96";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_1p2: ldo9 {
+ regulator-name = "vreg_l9b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -138,99 +148,116 @@ pm8350c-rpmh-regulators {
vdd-bob-supply = <&vph_pwr>;
vreg_s1c_1p86: smps1 {
+ regulator-name = "vreg_s1c_1p86";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1952000>;
};
vreg_s2c_0p8: smps2 {
+ regulator-name = "vreg_s2c_0p8";
regulator-min-microvolt = <640000>;
regulator-max-microvolt = <1000000>;
};
vreg_s10c_1p05: smps10 {
+ regulator-name = "vreg_s10c_1p05";
regulator-min-microvolt = <1048000>;
regulator-max-microvolt = <1128000>;
};
vreg_bob: bob {
+ regulator-name = "vreg_bob";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
};
vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_1p8: ldo2 {
+ regulator-name = "vreg_l2c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_3p0: ldo3 {
+ regulator-name = "vreg_l3c_3p0";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c_uim1: ldo4 {
+ regulator-name = "vreg_l4c_uim1";
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5c_uim2: ldo5 {
+ regulator-name = "vreg_l5c_uim2";
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c_1p8: ldo6 {
+ regulator-name = "vreg_l6c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
+ regulator-name = "vreg_l7c_3p0";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p8: ldo8 {
+ regulator-name = "vreg_l8c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p96: ldo9 {
+ regulator-name = "vreg_l9c_2p96";
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_1p2: ldo10 {
+ regulator-name = "vreg_l10c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_2p96: ldo11 {
+ regulator-name = "vreg_l11c_2p96";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12c_1p8: ldo12 {
+ regulator-name = "vreg_l12c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13c_3p0: ldo13 {
+ regulator-name = "vreg_l13c_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
--
2.26.2
prev parent reply other threads:[~2021-02-04 17:16 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-04 17:09 [PATCH 0/6]: arm64: dts: qcom: sm8350: more device support Vinod Koul
2021-02-04 17:09 ` [PATCH 1/6] arm64: dts: qcom: Add SM8350 apss_smmu node Vinod Koul
2021-02-04 17:09 ` [PATCH 2/6] arm64: dts: qcom: sm8350: add USB and PHY device nodes Vinod Koul
2021-02-04 18:05 ` Jack Pham
2021-02-05 4:41 ` Vinod Koul
2021-02-04 17:09 ` [PATCH 3/6] arm64: dts: qcom: sm8350-mtp: enable USB nodes Vinod Koul
2021-02-04 17:09 ` [PATCH 4/6] arm64: dts: qcom: Add SM8350 UFS nodes Vinod Koul
2021-02-04 17:09 ` [PATCH 5/6] arm64: dts: qcom: sm8350-mtp: enable " Vinod Koul
2021-02-04 17:09 ` Vinod Koul [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210204170907.63545-7-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).