From: Benjamin Li <benl@squareup.com>
To: Georgi Djakov <georgi.djakov@linaro.org>, Jun Nie <jun.nie@linaro.org>
Cc: kernel@squareup.com, Benjamin Li <benl@squareup.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Georgi Djakov <djakov@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/2] interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
Date: Thu, 4 Feb 2021 17:52:05 -0800 [thread overview]
Message-ID: <20210205015205.22947-3-benl@squareup.com> (raw)
In-Reply-To: <20210205015205.22947-1-benl@squareup.com>
Some nodes are incorrectly marked as RPM-controlled (they have RPM
master and slave ids assigned), but are actually controlled by the
application CPU instead. The RPM complains when we send requests for
resources that it can't control. Let's fix this by replacing the IDs,
with the default "-1" in which case no requests are sent.
See commit c497f9322af9 ("interconnect: qcom: msm8916: Remove rpm-ids
from non-RPM nodes") where this was done for msm8916.
Signed-off-by: Benjamin Li <benl@squareup.com>
---
drivers/interconnect/qcom/msm8939.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/interconnect/qcom/msm8939.c b/drivers/interconnect/qcom/msm8939.c
index dfbec30ed149..20f31a1b4192 100644
--- a/drivers/interconnect/qcom/msm8939.c
+++ b/drivers/interconnect/qcom/msm8939.c
@@ -131,7 +131,7 @@ DEFINE_QNODE(mas_pcnoc_sdcc_1, MSM8939_MASTER_SDCC_1, 8, -1, -1, MSM8939_PNOC_IN
DEFINE_QNODE(mas_pcnoc_sdcc_2, MSM8939_MASTER_SDCC_2, 8, -1, -1, MSM8939_PNOC_INT_1);
DEFINE_QNODE(mas_qdss_bam, MSM8939_MASTER_QDSS_BAM, 8, -1, -1, MSM8939_SNOC_QDSS_INT);
DEFINE_QNODE(mas_qdss_etr, MSM8939_MASTER_QDSS_ETR, 8, -1, -1, MSM8939_SNOC_QDSS_INT);
-DEFINE_QNODE(mas_snoc_cfg, MSM8939_MASTER_SNOC_CFG, 4, 20, -1, MSM8939_SLAVE_SRVC_SNOC);
+DEFINE_QNODE(mas_snoc_cfg, MSM8939_MASTER_SNOC_CFG, 4, -1, -1, MSM8939_SLAVE_SRVC_SNOC);
DEFINE_QNODE(mas_spdm, MSM8939_MASTER_SPDM, 4, -1, -1, MSM8939_PNOC_MAS_0);
DEFINE_QNODE(mas_tcu0, MSM8939_MASTER_TCU0, 16, -1, -1, MSM8939_SLAVE_EBI_CH0, MSM8939_BIMC_SNOC_MAS, MSM8939_SLAVE_AMPSS_L2);
DEFINE_QNODE(mas_usb_hs1, MSM8939_MASTER_USB_HS1, 4, -1, -1, MSM8939_PNOC_MAS_1);
@@ -156,14 +156,14 @@ DEFINE_QNODE(pcnoc_snoc_mas, MSM8939_PNOC_SNOC_MAS, 8, 29, -1, MSM8939_PNOC_SNOC
DEFINE_QNODE(pcnoc_snoc_slv, MSM8939_PNOC_SNOC_SLV, 8, -1, 45, MSM8939_SNOC_INT_0, MSM8939_SNOC_INT_BIMC, MSM8939_SNOC_INT_1);
DEFINE_QNODE(qdss_int, MSM8939_SNOC_QDSS_INT, 8, -1, -1, MSM8939_SNOC_INT_0, MSM8939_SNOC_INT_BIMC);
DEFINE_QNODE(slv_apps_l2, MSM8939_SLAVE_AMPSS_L2, 16, -1, -1, 0);
-DEFINE_QNODE(slv_apss, MSM8939_SLAVE_APSS, 4, -1, 20, 0);
+DEFINE_QNODE(slv_apss, MSM8939_SLAVE_APSS, 4, -1, -1, 0);
DEFINE_QNODE(slv_audio, MSM8939_SLAVE_LPASS, 4, -1, -1, 0);
DEFINE_QNODE(slv_bimc_cfg, MSM8939_SLAVE_BIMC_CFG, 4, -1, -1, 0);
DEFINE_QNODE(slv_blsp_1, MSM8939_SLAVE_BLSP_1, 4, -1, -1, 0);
DEFINE_QNODE(slv_boot_rom, MSM8939_SLAVE_BOOT_ROM, 4, -1, -1, 0);
DEFINE_QNODE(slv_camera_cfg, MSM8939_SLAVE_CAMERA_CFG, 4, -1, -1, 0);
-DEFINE_QNODE(slv_cats_0, MSM8939_SLAVE_CATS_128, 16, -1, 106, 0);
-DEFINE_QNODE(slv_cats_1, MSM8939_SLAVE_OCMEM_64, 8, -1, 107, 0);
+DEFINE_QNODE(slv_cats_0, MSM8939_SLAVE_CATS_128, 16, -1, -1, 0);
+DEFINE_QNODE(slv_cats_1, MSM8939_SLAVE_OCMEM_64, 8, -1, -1, 0);
DEFINE_QNODE(slv_clk_ctl, MSM8939_SLAVE_CLK_CTL, 4, -1, -1, 0);
DEFINE_QNODE(slv_crypto_0_cfg, MSM8939_SLAVE_CRYPTO_0_CFG, 4, -1, -1, 0);
DEFINE_QNODE(slv_dehr_cfg, MSM8939_SLAVE_DEHR_CFG, 4, -1, -1, 0);
@@ -187,20 +187,20 @@ DEFINE_QNODE(slv_sdcc_2, MSM8939_SLAVE_SDCC_2, 4, -1, -1, 0);
DEFINE_QNODE(slv_security, MSM8939_SLAVE_SECURITY, 4, -1, -1, 0);
DEFINE_QNODE(slv_snoc_cfg, MSM8939_SLAVE_SNOC_CFG, 4, -1, -1, 0);
DEFINE_QNODE(slv_spdm, MSM8939_SLAVE_SPDM, 4, -1, -1, 0);
-DEFINE_QNODE(slv_srvc_snoc, MSM8939_SLAVE_SRVC_SNOC, 8, -1, 29, 0);
+DEFINE_QNODE(slv_srvc_snoc, MSM8939_SLAVE_SRVC_SNOC, 8, -1, -1, 0);
DEFINE_QNODE(slv_tcsr, MSM8939_SLAVE_TCSR, 4, -1, -1, 0);
DEFINE_QNODE(slv_tlmm, MSM8939_SLAVE_TLMM, 4, -1, -1, 0);
DEFINE_QNODE(slv_usb_hs1, MSM8939_SLAVE_USB_HS1, 4, -1, -1, 0);
DEFINE_QNODE(slv_usb_hs2, MSM8939_SLAVE_USB_HS2, 4, -1, -1, 0);
DEFINE_QNODE(slv_venus_cfg, MSM8939_SLAVE_VENUS_CFG, 4, -1, -1, 0);
-DEFINE_QNODE(snoc_bimc_0_mas, MSM8939_SNOC_BIMC_0_MAS, 16, 3, -1, MSM8939_SNOC_BIMC_0_SLV);
-DEFINE_QNODE(snoc_bimc_0_slv, MSM8939_SNOC_BIMC_0_SLV, 16, -1, 24, MSM8939_SLAVE_EBI_CH0);
+DEFINE_QNODE(snoc_bimc_0_mas, MSM8939_SNOC_BIMC_0_MAS, 16, -1, -1, MSM8939_SNOC_BIMC_0_SLV);
+DEFINE_QNODE(snoc_bimc_0_slv, MSM8939_SNOC_BIMC_0_SLV, 16, -1, -1, MSM8939_SLAVE_EBI_CH0);
DEFINE_QNODE(snoc_bimc_1_mas, MSM8939_SNOC_BIMC_1_MAS, 16, 76, -1, MSM8939_SNOC_BIMC_1_SLV);
DEFINE_QNODE(snoc_bimc_1_slv, MSM8939_SNOC_BIMC_1_SLV, 16, -1, 104, MSM8939_SLAVE_EBI_CH0);
DEFINE_QNODE(snoc_bimc_2_mas, MSM8939_SNOC_BIMC_2_MAS, 16, -1, -1, MSM8939_SNOC_BIMC_2_SLV);
DEFINE_QNODE(snoc_bimc_2_slv, MSM8939_SNOC_BIMC_2_SLV, 16, -1, -1, MSM8939_SLAVE_EBI_CH0);
DEFINE_QNODE(snoc_int_0, MSM8939_SNOC_INT_0, 8, 99, 130, MSM8939_SLAVE_QDSS_STM, MSM8939_SLAVE_IMEM, MSM8939_SNOC_PNOC_MAS);
-DEFINE_QNODE(snoc_int_1, MSM8939_SNOC_INT_1, 8, 100, 131, MSM8939_SLAVE_APSS, MSM8939_SLAVE_CATS_128, MSM8939_SLAVE_OCMEM_64);
+DEFINE_QNODE(snoc_int_1, MSM8939_SNOC_INT_1, 8, -1, -1, MSM8939_SLAVE_APSS, MSM8939_SLAVE_CATS_128, MSM8939_SLAVE_OCMEM_64);
DEFINE_QNODE(snoc_int_bimc, MSM8939_SNOC_INT_BIMC, 8, 101, 132, MSM8939_SNOC_BIMC_1_MAS);
DEFINE_QNODE(snoc_pcnoc_mas, MSM8939_SNOC_PNOC_MAS, 8, -1, -1, MSM8939_SNOC_PNOC_SLV);
DEFINE_QNODE(snoc_pcnoc_slv, MSM8939_SNOC_PNOC_SLV, 8, -1, -1, MSM8939_PNOC_INT_0);
--
2.17.1
next prev parent reply other threads:[~2021-02-05 1:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-05 1:52 [PATCH v2 0/2] Clean up MSM8939 interconnect driver Benjamin Li
2021-02-05 1:52 ` [PATCH v2 1/2] interconnect: qcom: icc-rpm: record slave RPM id in error log Benjamin Li
2021-02-05 1:52 ` Benjamin Li [this message]
2021-02-05 3:03 ` [PATCH v2 0/2] Clean up MSM8939 interconnect driver Jun Nie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210205015205.22947-3-benl@squareup.com \
--to=benl@squareup.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=djakov@kernel.org \
--cc=georgi.djakov@linaro.org \
--cc=jun.nie@linaro.org \
--cc=kernel@squareup.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).