From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
npiggin@gmail.com
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [RFC PATCH v1 04/41] powerpc/40x: Save SRR0/SRR1 and r10/r11 earlier in critical exception
Date: Tue, 9 Feb 2021 09:56:28 +0000 (UTC) [thread overview]
Message-ID: <5eff95c62138697cc0c6ed39808cc2d71cdaf820.1612864003.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1612864003.git.christophe.leroy@csgroup.eu>
In order to be able to switch MMU on in exception prolog, save
SRR0 and SRR1 earlier.
Also save r10 and r11 into stack earlier to better match with the
normal exception prolog.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/kernel/entry_32.S | 9 ---------
arch/powerpc/kernel/head_40x.S | 8 ++++++++
2 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 8dea4d3b1d06..1e59d0bb1a6f 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -107,15 +107,6 @@ _ASM_NOKPROBE_SYMBOL(crit_transfer_to_handler)
#ifdef CONFIG_40x
.globl crit_transfer_to_handler
crit_transfer_to_handler:
- lwz r0,crit_r10@l(0)
- stw r0,GPR10(r11)
- lwz r0,crit_r11@l(0)
- stw r0,GPR11(r11)
- mfspr r0,SPRN_SRR0
- stw r0,crit_srr0@l(0)
- mfspr r0,SPRN_SRR1
- stw r0,crit_srr1@l(0)
-
/* set the stack limit to the current stack */
mfspr r8,SPRN_SPRG_THREAD
lwz r0,KSP_LIMIT(r8)
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 9cef423d574b..067ae1302c1c 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -103,6 +103,10 @@ _ENTRY(saved_ksp_limit)
.macro CRITICAL_EXCEPTION_PROLOG
stw r10,crit_r10@l(0) /* save two registers to work with */
stw r11,crit_r11@l(0)
+ mfspr r10,SPRN_SRR0
+ mfspr r11,SPRN_SRR1
+ stw r10,crit_srr0@l(0)
+ stw r11,crit_srr1@l(0)
mfcr r10 /* save CR in r10 for now */
mfspr r11,SPRN_SRR3 /* check whether user or kernel */
andi. r11,r11,MSR_PR
@@ -120,6 +124,10 @@ _ENTRY(saved_ksp_limit)
stw r9,GPR9(r11)
mflr r10
stw r10,_LINK(r11)
+ lwz r10,crit_r10@l(0)
+ lwz r12,crit_r11@l(0)
+ stw r10,GPR10(r11)
+ stw r12,GPR11(r11)
mfspr r12,SPRN_DEAR /* save DEAR and ESR in the frame */
stw r12,_DEAR(r11) /* since they may have had stuff */
mfspr r9,SPRN_ESR /* in them at the point where the */
--
2.25.0
next prev parent reply other threads:[~2021-02-09 10:00 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-09 9:56 [RFC PATCH v1 00/41] powerpc/32: Switch to interrupt entry/exit in C Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 01/41] powerpc/32: Preserve cr1 in exception prolog stack check to fix build error Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 02/41] powerpc/40x: Don't use SPRN_SPRG_SCRATCH0/1 in TLB miss handlers Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 03/41] powerpc/40x: Change CRITICAL_EXCEPTION_PROLOG macro to a gas macro Christophe Leroy
2021-02-09 9:56 ` Christophe Leroy [this message]
2021-02-09 9:56 ` [RFC PATCH v1 05/41] powerpc/40x: Reorder a few instructions in critical exception prolog Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 06/41] powerpc/40x: Prepare for enabling MMU " Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 07/41] powerpc/40x: Prepare normal exception handler for enabling MMU early Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 08/41] powerpc/32: Reconcile interrupts in C Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 09/41] powerpc/32: Entry cpu time accounting " Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 10/41] powerpc/32: Handle bookE debugging in C in exception entry Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 11/41] powerpc/32: Use fast instruction to set MSR RI in exception prolog on 8xx Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 12/41] powerpc/32: Remove ksp_limit Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 13/41] powerpc/32: Always enable data translation in exception prolog Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 14/41] powerpc/32: Tag DAR in EXCEPTION_PROLOG_2 for the 8xx Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 15/41] powerpc/32: Enable instruction translation at the same time as data translation Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 16/41] powerpc/32: Statically initialise first emergency context Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 17/41] powerpc/32: Add vmap_stack_overflow label inside the macro Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 18/41] powerpc/32: Use START_EXCEPTION() as much as possible Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 19/41] powerpc/32: Move exception prolog code into .text once MMU is back on Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 20/41] powerpc/32: Provide a name to exception prolog continuation in virtual mode Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 21/41] powerpc/32: Refactor booke critical registers saving Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 22/41] powerpc/32: Perform normal function call in exception entry Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 23/41] powerpc/32: Always save non volatile registers on " Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 24/41] powerpc/32: Replace ASM exception exit by C exception exit from ppc64 Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 25/41] powerpc/32: Set regs parameter in r3 in transfer_to_handler Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 26/41] powerpc/32: Remove handle_page_fault() Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 27/41] powerpc/32: Save trap number on stack in exception prolog Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 28/41] powerpc/32: Add a prepare_transfer_to_handler macro for exception prologs Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 29/41] powerpc/32: Only restore non volatile registers when required Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 30/41] powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 31/41] powerpc/32: Remove the xfer parameter in EXCEPTION() macro Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 32/41] powerpc/32: Refactor saving of volatile registers in exception prologs Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 33/41] powerpc/32: Save remaining registers in exception prolog Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 34/41] powerpc/32: Set current->thread.regs in C interrupt entry Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 35/41] powerpc/32: Return directly from power_save_ppc32_restore() Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 36/41] powerpc/32: Only use prepare_transfer_to_handler function on book3s/32 and e500 Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 37/41] powerpc/32s: Move KUEP locking/unlocking in C Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 38/41] powerpc/64s: Make kuap_check_amr() and kuap_get_and_check_amr() generic Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 39/41] powerpc/32s: Create C version of kuap save/restore/check helpers Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 40/41] powerpc/8xx: " Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 41/41] powerpc/32: Manage KUAP in C Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5eff95c62138697cc0c6ed39808cc2d71cdaf820.1612864003.git.christophe.leroy@csgroup.eu \
--to=christophe.leroy@csgroup.eu \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).