From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
npiggin@gmail.com
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [RFC PATCH v1 35/41] powerpc/32: Return directly from power_save_ppc32_restore()
Date: Tue, 9 Feb 2021 09:57:00 +0000 (UTC) [thread overview]
Message-ID: <422577ca9a02b718c9f20462940078690a9f2737.1612864004.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1612864003.git.christophe.leroy@csgroup.eu>
transfer_to_handler_cont: is now just a blr.
Directly perform blr in power_save_ppc32_restore().
Also remove useless setting of r11 in e500 version of
power_save_ppc32_restore().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/kernel/entry_32.S | 2 --
arch/powerpc/kernel/idle_6xx.S | 2 +-
arch/powerpc/kernel/idle_e500.S | 10 +---------
3 files changed, 2 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 71ef5ab84b03..70bc18f18f1a 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -75,8 +75,6 @@ prepare_transfer_to_handler:
bt- 31-TLF_NAPPING,4f
bt- 31-TLF_SLEEPING,7f
#endif /* CONFIG_PPC_BOOK3S_32 || CONFIG_E500 */
- .globl transfer_to_handler_cont
-transfer_to_handler_cont:
blr
#if defined (CONFIG_PPC_BOOK3S_32) || defined(CONFIG_E500)
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 153366e178c4..13cad9297d82 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -176,7 +176,7 @@ BEGIN_FTR_SECTION
lwz r9,nap_save_hid1@l(r9)
mtspr SPRN_HID1, r9
END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
- b transfer_to_handler_cont
+ blr
_ASM_NOKPROBE_SYMBOL(power_save_ppc32_restore)
.data
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
index 7795727e7f08..9e1bc4502c50 100644
--- a/arch/powerpc/kernel/idle_e500.S
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -81,13 +81,5 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
_GLOBAL(power_save_ppc32_restore)
lwz r9,_LINK(r11) /* interrupted in e500_idle */
stw r9,_NIP(r11) /* make it do a blr */
-
-#ifdef CONFIG_SMP
- lwz r11,TASK_CPU(r2) /* get cpu number * 4 */
- slwi r11,r11,2
-#else
- li r11,0
-#endif
-
- b transfer_to_handler_cont
+ blr
_ASM_NOKPROBE_SYMBOL(power_save_ppc32_restore)
--
2.25.0
next prev parent reply other threads:[~2021-02-09 10:22 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-09 9:56 [RFC PATCH v1 00/41] powerpc/32: Switch to interrupt entry/exit in C Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 01/41] powerpc/32: Preserve cr1 in exception prolog stack check to fix build error Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 02/41] powerpc/40x: Don't use SPRN_SPRG_SCRATCH0/1 in TLB miss handlers Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 03/41] powerpc/40x: Change CRITICAL_EXCEPTION_PROLOG macro to a gas macro Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 04/41] powerpc/40x: Save SRR0/SRR1 and r10/r11 earlier in critical exception Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 05/41] powerpc/40x: Reorder a few instructions in critical exception prolog Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 06/41] powerpc/40x: Prepare for enabling MMU " Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 07/41] powerpc/40x: Prepare normal exception handler for enabling MMU early Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 08/41] powerpc/32: Reconcile interrupts in C Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 09/41] powerpc/32: Entry cpu time accounting " Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 10/41] powerpc/32: Handle bookE debugging in C in exception entry Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 11/41] powerpc/32: Use fast instruction to set MSR RI in exception prolog on 8xx Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 12/41] powerpc/32: Remove ksp_limit Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 13/41] powerpc/32: Always enable data translation in exception prolog Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 14/41] powerpc/32: Tag DAR in EXCEPTION_PROLOG_2 for the 8xx Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 15/41] powerpc/32: Enable instruction translation at the same time as data translation Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 16/41] powerpc/32: Statically initialise first emergency context Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 17/41] powerpc/32: Add vmap_stack_overflow label inside the macro Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 18/41] powerpc/32: Use START_EXCEPTION() as much as possible Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 19/41] powerpc/32: Move exception prolog code into .text once MMU is back on Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 20/41] powerpc/32: Provide a name to exception prolog continuation in virtual mode Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 21/41] powerpc/32: Refactor booke critical registers saving Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 22/41] powerpc/32: Perform normal function call in exception entry Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 23/41] powerpc/32: Always save non volatile registers on " Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 24/41] powerpc/32: Replace ASM exception exit by C exception exit from ppc64 Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 25/41] powerpc/32: Set regs parameter in r3 in transfer_to_handler Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 26/41] powerpc/32: Remove handle_page_fault() Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 27/41] powerpc/32: Save trap number on stack in exception prolog Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 28/41] powerpc/32: Add a prepare_transfer_to_handler macro for exception prologs Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 29/41] powerpc/32: Only restore non volatile registers when required Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 30/41] powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 31/41] powerpc/32: Remove the xfer parameter in EXCEPTION() macro Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 32/41] powerpc/32: Refactor saving of volatile registers in exception prologs Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 33/41] powerpc/32: Save remaining registers in exception prolog Christophe Leroy
2021-02-09 9:56 ` [RFC PATCH v1 34/41] powerpc/32: Set current->thread.regs in C interrupt entry Christophe Leroy
2021-02-09 9:57 ` Christophe Leroy [this message]
2021-02-09 9:57 ` [RFC PATCH v1 36/41] powerpc/32: Only use prepare_transfer_to_handler function on book3s/32 and e500 Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 37/41] powerpc/32s: Move KUEP locking/unlocking in C Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 38/41] powerpc/64s: Make kuap_check_amr() and kuap_get_and_check_amr() generic Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 39/41] powerpc/32s: Create C version of kuap save/restore/check helpers Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 40/41] powerpc/8xx: " Christophe Leroy
2021-02-09 9:57 ` [RFC PATCH v1 41/41] powerpc/32: Manage KUAP in C Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=422577ca9a02b718c9f20462940078690a9f2737.1612864004.git.christophe.leroy@csgroup.eu \
--to=christophe.leroy@csgroup.eu \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).