From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To: f.fainelli@gmail.com, linux-kernel@vger.kernel.org,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: linux-rpi-kernel@lists.infradead.org, phil@raspberrypi.com,
wahrenst@gmx.net, linux-arm-kernel@lists.infradead.org,
mripard@kernel.org, eric@anholt.net,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org
Subject: [RFC/PATCH v2 03/16] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
Date: Tue, 9 Feb 2021 13:58:59 +0100 [thread overview]
Message-ID: <20210209125912.3398-4-nsaenzjulienne@suse.de> (raw)
In-Reply-To: <20210209125912.3398-1-nsaenzjulienne@suse.de>
Add a new compatible string for BCM2711 and the option to provide a
third reg property for the board's new Argon ASB.
In BCM2711 the new Argon ASB took over V3D, which is our only consumer
of this driver so far. The old ASB is still be present with ISP and H264
bits but no V3D.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
.../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
index 1dbe3657c690..8422c285828c 100644
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
@@ -21,18 +21,20 @@ properties:
items:
- enum:
- brcm,bcm2835-pm
+ - brcm,bcm2711-pm
- const: brcm,bcm2835-pm-wdt
reg:
minItems: 1
- maxItems: 2
+ maxItems: 3
reg-names:
minItems: 1
- maxItems: 2
+ maxItems: 3
items:
- const: pm
- const: rpivid_asb
+ - const: argon_asb
"#power-domain-cells":
const: 1
@@ -76,7 +78,7 @@ examples:
#reset-cells = <1>;
reg = <0x7e100000 0x114>,
<0x7e00a000 0x24>;
- reg-names = "pm", "rpivid_asb";
+ reg-names = "pm", "rpivid_asb", "argon_asb";
clocks = <&clocks BCM2835_CLOCK_V3D>,
<&clocks BCM2835_CLOCK_PERI_IMAGE>,
<&clocks BCM2835_CLOCK_H264>,
--
2.30.0
next prev parent reply other threads:[~2021-02-09 13:02 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-09 12:58 [RFC/PATCH v2 00/16] Raspberry PI 4 V3D enablement Nicolas Saenz Julienne
2021-02-09 12:58 ` [RFC/PATCH v2 01/16] dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema Nicolas Saenz Julienne
2021-02-10 22:26 ` Rob Herring
2021-02-09 12:58 ` [RFC/PATCH v2 02/16] dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names Nicolas Saenz Julienne
2021-02-10 22:44 ` Rob Herring
2021-02-09 12:58 ` Nicolas Saenz Julienne [this message]
2021-02-10 22:44 ` [RFC/PATCH v2 03/16] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711 Rob Herring
2021-02-09 12:59 ` [RFC/PATCH v2 04/16] ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node Nicolas Saenz Julienne
2021-02-09 12:59 ` [RFC/PATCH v2 05/16] ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node Nicolas Saenz Julienne
2021-02-09 12:59 ` [RFC/PATCH v2 06/16] mfd: bcm2835-pm: Rename asb to rpivid_asb Nicolas Saenz Julienne
2021-02-09 12:59 ` [RFC/PATCH v2 07/16] mfd: bcm2835-pm: Use 'reg-names' to get resources Nicolas Saenz Julienne
2021-02-09 12:59 ` [RFC/PATCH v2 08/16] mfd: bcm2835-pm: Add support for BCM2711 Nicolas Saenz Julienne
2021-02-09 12:59 ` [RFC/PATCH v2 09/16] soc: bcm: bcm2835-power: Add support for BCM2711's Argon ASB Nicolas Saenz Julienne
2021-02-09 13:19 ` Phil Elwell
2021-02-09 14:00 ` Nicolas Saenz Julienne
2021-02-09 16:38 ` Phil Elwell
2021-02-09 16:50 ` Nicolas Saenz Julienne
2021-02-09 12:59 ` [RFC/PATCH v2 10/16] soc: bcm: bcm2835-power: Bypass power_on/off() calls Nicolas Saenz Julienne
2021-02-09 12:59 ` [RFC/PATCH v2 11/16] dt-bindings: gpu: v3d: Add BCM2711's compatible Nicolas Saenz Julienne
2021-02-10 22:45 ` Rob Herring
2021-02-09 12:59 ` [RFC/PATCH v2 12/16] drm/v3d: Get rid of pm code Nicolas Saenz Julienne
2021-02-09 12:59 ` [RFC/PATCH v2 13/16] drm/v3d: Add support for bcm2711 Nicolas Saenz Julienne
2021-02-09 12:59 ` [RFC/PATCH v2 14/16] ARM: dts: bcm2711: Enable V3D Nicolas Saenz Julienne
2021-02-09 12:59 ` [RFC/PATCH v2 15/16] ARM: configs: Enable DRM_V3D Nicolas Saenz Julienne
2021-02-09 12:59 ` [RFC/PATCH v2 16/16] arm64: config: " Nicolas Saenz Julienne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210209125912.3398-4-nsaenzjulienne@suse.de \
--to=nsaenzjulienne@suse.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=eric@anholt.net \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mripard@kernel.org \
--cc=phil@raspberrypi.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
--cc=wahrenst@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).