From: huangxuesen <hxseverything@gmail.com>
To: willemdebruijn.kernel@gmail.com
Cc: davem@davemloft.net, bpf@vger.kernel.org, daniel@iogearbox.net,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
huangxuesen <huangxuesen@kuaishou.com>,
Willem de Bruijn <willemb@google.com>,
chengzhiyong <chengzhiyong@kuaishou.com>,
wangli <wangli09@kuaishou.com>
Subject: [PATCH/v2] bpf: add bpf_skb_adjust_room flag BPF_F_ADJ_ROOM_ENCAP_L2_ETH
Date: Wed, 10 Feb 2021 14:59:25 +0800 [thread overview]
Message-ID: <20210210065925.22614-1-hxseverything@gmail.com> (raw)
From: huangxuesen <huangxuesen@kuaishou.com>
bpf_skb_adjust_room sets the inner_protocol as skb->protocol for packets
encapsulation. But that is not appropriate when pushing Ethernet header.
Add an option to further specify encap L2 type and set the inner_protocol
as ETH_P_TEB.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: huangxuesen <huangxuesen@kuaishou.com>
Signed-off-by: chengzhiyong <chengzhiyong@kuaishou.com>
Signed-off-by: wangli <wangli09@kuaishou.com>
---
include/uapi/linux/bpf.h | 5 +++++
net/core/filter.c | 11 ++++++++++-
tools/include/uapi/linux/bpf.h | 5 +++++
3 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 77d7c1b..d791596 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1751,6 +1751,10 @@ struct bpf_stack_build_id {
* Use with ENCAP_L3/L4 flags to further specify the tunnel
* type; *len* is the length of the inner MAC header.
*
+ * * **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**:
+ * Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the
+ * L2 type as Ethernet.
+ *
* A call to this helper is susceptible to change the underlying
* packet buffer. Therefore, at load time, all checks on pointers
* previously done by the verifier are invalidated and must be
@@ -4088,6 +4092,7 @@ enum {
BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3),
BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4),
BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5),
+ BPF_F_ADJ_ROOM_ENCAP_L2_ETH = (1ULL << 6),
};
enum {
diff --git a/net/core/filter.c b/net/core/filter.c
index 255aeee..8d1fb61 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3412,6 +3412,7 @@ static u32 bpf_skb_net_base_len(const struct sk_buff *skb)
BPF_F_ADJ_ROOM_ENCAP_L3_MASK | \
BPF_F_ADJ_ROOM_ENCAP_L4_GRE | \
BPF_F_ADJ_ROOM_ENCAP_L4_UDP | \
+ BPF_F_ADJ_ROOM_ENCAP_L2_ETH | \
BPF_F_ADJ_ROOM_ENCAP_L2( \
BPF_ADJ_ROOM_ENCAP_L2_MASK))
@@ -3448,6 +3449,10 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff,
flags & BPF_F_ADJ_ROOM_ENCAP_L4_UDP)
return -EINVAL;
+ if (flags & BPF_F_ADJ_ROOM_ENCAP_L2_ETH &&
+ inner_mac_len < ETH_HLEN)
+ return -EINVAL;
+
if (skb->encapsulation)
return -EALREADY;
@@ -3466,7 +3471,11 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff,
skb->inner_mac_header = inner_net - inner_mac_len;
skb->inner_network_header = inner_net;
skb->inner_transport_header = inner_trans;
- skb_set_inner_protocol(skb, skb->protocol);
+
+ if (flags & BPF_F_ADJ_ROOM_ENCAP_L2_ETH)
+ skb_set_inner_protocol(skb, htons(ETH_P_TEB));
+ else
+ skb_set_inner_protocol(skb, skb->protocol);
skb->encapsulation = 1;
skb_set_network_header(skb, mac_len);
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 77d7c1b..d791596 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -1751,6 +1751,10 @@ struct bpf_stack_build_id {
* Use with ENCAP_L3/L4 flags to further specify the tunnel
* type; *len* is the length of the inner MAC header.
*
+ * * **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**:
+ * Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the
+ * L2 type as Ethernet.
+ *
* A call to this helper is susceptible to change the underlying
* packet buffer. Therefore, at load time, all checks on pointers
* previously done by the verifier are invalidated and must be
@@ -4088,6 +4092,7 @@ enum {
BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3),
BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4),
BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5),
+ BPF_F_ADJ_ROOM_ENCAP_L2_ETH = (1ULL << 6),
};
enum {
--
1.8.3.1
next reply other threads:[~2021-02-10 7:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-10 6:59 huangxuesen [this message]
2021-02-10 14:50 ` [PATCH/v2] bpf: add bpf_skb_adjust_room flag BPF_F_ADJ_ROOM_ENCAP_L2_ETH Willem de Bruijn
2021-02-11 15:26 ` Daniel Borkmann
2021-02-18 16:35 ` 黄学森
2021-02-18 16:39 Xuesen Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210210065925.22614-1-hxseverything@gmail.com \
--to=hxseverything@gmail.com \
--cc=bpf@vger.kernel.org \
--cc=chengzhiyong@kuaishou.com \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=huangxuesen@kuaishou.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=wangli09@kuaishou.com \
--cc=willemb@google.com \
--cc=willemdebruijn.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).