[v3,13/15] ARM: dts: bcm2711: Enable V3D
diff mbox series

Message ID 20210217114811.22069-14-nsaenzjulienne@suse.de
State New, archived
Headers show
Series
  • Raspberry PI 4 V3D enablement
Related show

Commit Message

Nicolas Saenz Julienne Feb. 17, 2021, 11:48 a.m. UTC
This enables V3D for bcm2711 (used in the Raspberry Pi 4).

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

---

Changes since v1:
 - Correct node's name address

 arch/arm/boot/dts/bcm2711.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index e864974b10c9..d2bbfc7c4daa 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -549,6 +549,18 @@  genet_mdio: mdio@e14 {
 				#size-cells = <0x1>;
 			};
 		};
+
+		v3d: gpu@7ec00000 {
+			compatible = "brcm,bcm2711-v3d";
+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			clocks = <&firmware_clocks 5>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };