From: Bhaumik Bhatt <bbhatt@codeaurora.org>
To: manivannan.sadhasivam@linaro.org
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
jhugo@codeaurora.org, linux-kernel@vger.kernel.org,
loic.poulain@linaro.org, carl.yin@quectel.com,
naveen.kumar@quectel.com, Bhaumik Bhatt <bbhatt@codeaurora.org>
Subject: [PATCH v4 2/3] bus: mhi: core: Download AMSS image from appropriate function
Date: Thu, 18 Feb 2021 18:17:31 -0800 [thread overview]
Message-ID: <1613701052-38885-3-git-send-email-bbhatt@codeaurora.org> (raw)
In-Reply-To: <1613701052-38885-1-git-send-email-bbhatt@codeaurora.org>
During full boot chain firmware download, the PM state worker
downloads the AMSS image after a blocking wait for the SBL
execution environment change when running in PBL transition
itself. Improve this design by having the host download the AMSS
image from the SBL transition of PM state worker thread when a
DEV_ST_TRANSITION_SBL is queued instead of the blocking wait.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
drivers/bus/mhi/core/boot.c | 48 ++++++++++++++++++++---------------------
drivers/bus/mhi/core/internal.h | 1 +
drivers/bus/mhi/core/pm.c | 2 ++
3 files changed, 27 insertions(+), 24 deletions(-)
diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index c2546bf..983e6b5 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -389,7 +389,6 @@ static void mhi_firmware_copy(struct mhi_controller *mhi_cntrl,
void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
{
const struct firmware *firmware = NULL;
- struct image_info *image_info;
struct device *dev = &mhi_cntrl->mhi_dev->dev;
const char *fw_name;
void *buf;
@@ -493,35 +492,15 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
ret = mhi_ready_state_transition(mhi_cntrl);
if (!mhi_cntrl->fbc_download)
- return;
+ goto exit_fw_load;
if (ret) {
dev_err(dev, "MHI did not enter READY state\n");
goto error_ready_state;
}
- /* Wait for the SBL event */
- ret = wait_event_timeout(mhi_cntrl->state_event,
- mhi_cntrl->ee == MHI_EE_SBL ||
- MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
- msecs_to_jiffies(mhi_cntrl->timeout_ms));
-
- if (!ret || MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
- dev_err(dev, "MHI did not enter SBL\n");
- goto error_ready_state;
- }
-
- /* Start full firmware image download */
- image_info = mhi_cntrl->fbc_image;
- ret = mhi_fw_load_bhie(mhi_cntrl,
- /* Vector table is the last entry */
- &image_info->mhi_buf[image_info->entries - 1]);
- if (ret) {
- dev_err(dev, "MHI did not load image over BHIe, ret: %d\n",
- ret);
- goto error_fw_load;
- }
-
+exit_fw_load:
+ dev_info(dev, "Wait for device to enter SBL or Mission mode\n");
return;
error_ready_state:
@@ -532,3 +511,24 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
mhi_cntrl->pm_state = MHI_PM_FW_DL_ERR;
wake_up_all(&mhi_cntrl->state_event);
}
+
+int mhi_download_amss_image(struct mhi_controller *mhi_cntrl)
+{
+ struct image_info *image_info = mhi_cntrl->fbc_image;
+ struct device *dev = &mhi_cntrl->mhi_dev->dev;
+ int ret;
+
+ if (!image_info)
+ return -EIO;
+
+ ret = mhi_fw_load_bhie(mhi_cntrl,
+ /* Vector table is the last entry */
+ &image_info->mhi_buf[image_info->entries - 1]);
+ if (ret) {
+ dev_err(dev, "MHI did not load AMSS, ret:%d\n", ret);
+ mhi_cntrl->pm_state = MHI_PM_FW_DL_ERR;
+ wake_up_all(&mhi_cntrl->state_event);
+ }
+
+ return ret;
+}
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 6f80ec3..6f37439 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -619,6 +619,7 @@ int mhi_pm_m3_transition(struct mhi_controller *mhi_cntrl);
int __mhi_device_get_sync(struct mhi_controller *mhi_cntrl);
int mhi_send_cmd(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan,
enum mhi_cmd_type cmd);
+int mhi_download_amss_image(struct mhi_controller *mhi_cntrl);
static inline bool mhi_is_active(struct mhi_controller *mhi_cntrl)
{
return (mhi_cntrl->dev_state >= MHI_STATE_M0 &&
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 8da8806..44aa7eb 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -758,6 +758,8 @@ void mhi_pm_st_worker(struct work_struct *work)
* either SBL or AMSS states
*/
mhi_create_devices(mhi_cntrl);
+ if (mhi_cntrl->fbc_download)
+ mhi_download_amss_image(mhi_cntrl);
break;
case DEV_ST_TRANSITION_MISSION_MODE:
mhi_pm_mission_mode_transition(mhi_cntrl);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2021-02-19 2:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-19 2:17 [PATCH v4 0/3] Serialize execution environment changes for MHI Bhaumik Bhatt
2021-02-19 2:17 ` [PATCH v4 1/3] bus: mhi: core: Clear devices when moving execution environments Bhaumik Bhatt
2021-02-19 16:10 ` Jeffrey Hugo
2021-02-19 19:13 ` Bhaumik Bhatt
2021-02-19 2:17 ` Bhaumik Bhatt [this message]
2021-02-19 2:17 ` [PATCH v4 3/3] bus: mhi: core: Process execution environment changes serially Bhaumik Bhatt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1613701052-38885-3-git-send-email-bbhatt@codeaurora.org \
--to=bbhatt@codeaurora.org \
--cc=carl.yin@quectel.com \
--cc=hemantk@codeaurora.org \
--cc=jhugo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=naveen.kumar@quectel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).