ath11k: qmi: use %pad to format dma_addr_t
diff mbox series

Message ID 20210221182754.2071863-1-geert@linux-m68k.org
State Accepted
Commit ebb9d34e073dc965e9e1f0632a95dcb83736f166
Headers show
Series
  • ath11k: qmi: use %pad to format dma_addr_t
Related show

Commit Message

Geert Uytterhoeven Feb. 21, 2021, 6:27 p.m. UTC
If CONFIG_ARCH_DMA_ADDR_T_64BIT=n:

    drivers/net/wireless/ath/ath11k/qmi.c: In function ‘ath11k_qmi_respond_fw_mem_request’:
    drivers/net/wireless/ath/ath11k/qmi.c:1690:8: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘dma_addr_t’ {aka ‘unsigned int’} [-Wformat=]
     1690 |        "qmi req mem_seg[%d] 0x%llx %u %u\n", i,
	  |        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     1691 |         ab->qmi.target_mem[i].paddr,
	  |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~
	  |                              |
	  |                              dma_addr_t {aka unsigned int}
    drivers/net/wireless/ath/ath11k/debug.h:64:30: note: in definition of macro ‘ath11k_dbg’
       64 |   __ath11k_dbg(ar, dbg_mask, fmt, ##__VA_ARGS__); \
	  |                              ^~~
    drivers/net/wireless/ath/ath11k/qmi.c:1690:34: note: format string is defined here
     1690 |        "qmi req mem_seg[%d] 0x%llx %u %u\n", i,
	  |                               ~~~^
	  |                                  |
	  |                                  long long unsigned int
	  |                               %x

Fixes: d5395a5486596308 ("ath11k: qmi: add debug message for allocated memory segment addresses and sizes")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/net/wireless/ath/ath11k/qmi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Kalle Valo Feb. 24, 2021, 6:37 a.m. UTC | #1
Geert Uytterhoeven <geert@linux-m68k.org> wrote:

> If CONFIG_ARCH_DMA_ADDR_T_64BIT=n:
> 
>     drivers/net/wireless/ath/ath11k/qmi.c: In function ‘ath11k_qmi_respond_fw_mem_request’:
>     drivers/net/wireless/ath/ath11k/qmi.c:1690:8: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘dma_addr_t’ {aka ‘unsigned int’} [-Wformat=]
>      1690 |        "qmi req mem_seg[%d] 0x%llx %u %u\n", i,
> 	  |        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>      1691 |         ab->qmi.target_mem[i].paddr,
> 	  |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 	  |                              |
> 	  |                              dma_addr_t {aka unsigned int}
>     drivers/net/wireless/ath/ath11k/debug.h:64:30: note: in definition of macro ‘ath11k_dbg’
>        64 |   __ath11k_dbg(ar, dbg_mask, fmt, ##__VA_ARGS__); \
> 	  |                              ^~~
>     drivers/net/wireless/ath/ath11k/qmi.c:1690:34: note: format string is defined here
>      1690 |        "qmi req mem_seg[%d] 0x%llx %u %u\n", i,
> 	  |                               ~~~^
> 	  |                                  |
> 	  |                                  long long unsigned int
> 	  |                               %x
> 
> Fixes: d5395a5486596308 ("ath11k: qmi: add debug message for allocated memory segment addresses and sizes")
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Patch applied to wireless-drivers.git, thanks.

ebb9d34e073d ath11k: qmi: use %pad to format dma_addr_t

Patch
diff mbox series

diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index 1aca841cd147cfee..7968fe4eda22a839 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -1687,8 +1687,8 @@  static int ath11k_qmi_respond_fw_mem_request(struct ath11k_base *ab)
 			req->mem_seg[i].size = ab->qmi.target_mem[i].size;
 			req->mem_seg[i].type = ab->qmi.target_mem[i].type;
 			ath11k_dbg(ab, ATH11K_DBG_QMI,
-				   "qmi req mem_seg[%d] 0x%llx %u %u\n", i,
-				    ab->qmi.target_mem[i].paddr,
+				   "qmi req mem_seg[%d] %pad %u %u\n", i,
+				    &ab->qmi.target_mem[i].paddr,
 				    ab->qmi.target_mem[i].size,
 				    ab->qmi.target_mem[i].type);
 		}