From: "Paul A. Clarke" <pc@us.ibm.com>
To: linux-perf-users@vger.kernel.org, linux-kernel@vger.kernel.org,
acme@kernel.org
Cc: mpe@ellerman.id.au, ananth@linux.vnet.ibm.com,
maddy@linux.vnet.ibm.com, naveen.n.rao@linux.vnet.ibm.com,
sukadev@linux.ibm.com
Subject: [PATCH] [perf] powerpc: Remove unsupported metrics
Date: Wed, 24 Feb 2021 12:14:36 -0600 [thread overview]
Message-ID: <20210224181436.782091-1-pc@us.ibm.com> (raw)
Several metrics are defined based on unsupported / non-existent
events, and silently discarded. Remove them for good code hygiene
and to avoid confusion.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
---
.../arch/powerpc/power9/metrics.json | 132 ------------------
1 file changed, 132 deletions(-)
diff --git a/tools/perf/pmu-events/arch/powerpc/power9/metrics.json b/tools/perf/pmu-events/arch/powerpc/power9/metrics.json
index f8784c608479..140402d2855f 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/metrics.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/metrics.json
@@ -1209,156 +1209,24 @@
"MetricGroup": "instruction_stats_percent_per_ref",
"MetricName": "inst_from_rmem_percent"
},
- {
- "BriefDescription": "%L2 Modified CO Cache read Utilization (4 pclks per disp attempt)",
- "MetricExpr": "((PM_L2_CASTOUT_MOD/2)*4)/ PM_RUN_CYC * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_co_m_rd_util"
- },
- {
- "BriefDescription": "L2 dcache invalidates per run inst (per core)",
- "MetricExpr": "(PM_L2_DC_INV / 2) / PM_RUN_INST_CMPL * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_dc_inv_rate_percent"
- },
{
"BriefDescription": "Demand load misses as a % of L2 LD dispatches (per thread)",
"MetricExpr": "PM_L1_DCACHE_RELOAD_VALID / (PM_L2_LD / 2) * 100",
"MetricGroup": "l2_stats",
"MetricName": "l2_dem_ld_disp_percent"
},
- {
- "BriefDescription": "L2 Icache invalidates per run inst (per core)",
- "MetricExpr": "(PM_L2_IC_INV / 2) / PM_RUN_INST_CMPL * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_ic_inv_rate_percent"
- },
- {
- "BriefDescription": "L2 Inst misses as a % of total L2 Inst dispatches (per thread)",
- "MetricExpr": "PM_L2_INST_MISS / PM_L2_INST * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_inst_miss_ratio_percent"
- },
- {
- "BriefDescription": "Average number of cycles between L2 Load hits",
- "MetricExpr": "(PM_L2_LD_HIT / PM_RUN_CYC) / 2",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_ld_hit_frequency"
- },
- {
- "BriefDescription": "Average number of cycles between L2 Load misses",
- "MetricExpr": "(PM_L2_LD_MISS / PM_RUN_CYC) / 2",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_ld_miss_frequency"
- },
- {
- "BriefDescription": "L2 Load misses as a % of total L2 Load dispatches (per thread)",
- "MetricExpr": "PM_L2_LD_MISS / PM_L2_LD * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_ld_miss_ratio_percent"
- },
- {
- "BriefDescription": "% L2 load disp attempts Cache read Utilization (4 pclks per disp attempt)",
- "MetricExpr": "((PM_L2_RCLD_DISP/2)*4)/ PM_RUN_CYC * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_ld_rd_util"
- },
- {
- "BriefDescription": "L2 load misses that require a cache write (4 pclks per disp attempt) % of pclks",
- "MetricExpr": "((( PM_L2_LD_DISP - PM_L2_LD_HIT)/2)*4)/ PM_RUN_CYC * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_ldmiss_wr_util"
- },
- {
- "BriefDescription": "L2 local pump prediction success",
- "MetricExpr": "PM_L2_LOC_GUESS_CORRECT / (PM_L2_LOC_GUESS_CORRECT + PM_L2_LOC_GUESS_WRONG) * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_local_pred_correct_percent"
- },
- {
- "BriefDescription": "L2 COs that were in M,Me,Mu state as a % of all L2 COs",
- "MetricExpr": "PM_L2_CASTOUT_MOD / (PM_L2_CASTOUT_MOD + PM_L2_CASTOUT_SHR) * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_mod_co_percent"
- },
- {
- "BriefDescription": "% of L2 Load RC dispatch atampts that failed because of address collisions and cclass conflicts",
- "MetricExpr": "(PM_L2_RCLD_DISP_FAIL_ADDR )/ PM_L2_RCLD_DISP * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_rc_ld_disp_addr_fail_percent"
- },
- {
- "BriefDescription": "% of L2 Load RC dispatch attempts that failed",
- "MetricExpr": "(PM_L2_RCLD_DISP_FAIL_ADDR + PM_L2_RCLD_DISP_FAIL_OTHER)/ PM_L2_RCLD_DISP * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_rc_ld_disp_fail_percent"
- },
- {
- "BriefDescription": "% of L2 Store RC dispatch atampts that failed because of address collisions and cclass conflicts",
- "MetricExpr": "PM_L2_RCST_DISP_FAIL_ADDR / PM_L2_RCST_DISP * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_rc_st_disp_addr_fail_percent"
- },
- {
- "BriefDescription": "% of L2 Store RC dispatch attempts that failed",
- "MetricExpr": "(PM_L2_RCST_DISP_FAIL_ADDR + PM_L2_RCST_DISP_FAIL_OTHER)/ PM_L2_RCST_DISP * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_rc_st_disp_fail_percent"
- },
- {
- "BriefDescription": "L2 Cache Read Utilization (per core)",
- "MetricExpr": "(((PM_L2_RCLD_DISP/2)*4)/ PM_RUN_CYC * 100) + (((PM_L2_RCST_DISP/2)*4)/PM_RUN_CYC * 100) + (((PM_L2_CASTOUT_MOD/2)*4)/PM_RUN_CYC * 100)",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_rd_util_percent"
- },
- {
- "BriefDescription": "L2 COs that were in T,Te,Si,S state as a % of all L2 COs",
- "MetricExpr": "PM_L2_CASTOUT_SHR / (PM_L2_CASTOUT_MOD + PM_L2_CASTOUT_SHR) * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_shr_co_percent"
- },
{
"BriefDescription": "L2 Store misses as a % of total L2 Store dispatches (per thread)",
"MetricExpr": "PM_L2_ST_MISS / PM_L2_ST * 100",
"MetricGroup": "l2_stats",
"MetricName": "l2_st_miss_ratio_percent"
},
- {
- "BriefDescription": "% L2 store disp attempts Cache read Utilization (4 pclks per disp attempt)",
- "MetricExpr": "((PM_L2_RCST_DISP/2)*4) / PM_RUN_CYC * 100",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_st_rd_util"
- },
{
"BriefDescription": "L2 stores that require a cache write (4 pclks per disp attempt) % of pclks",
"MetricExpr": "((PM_L2_ST_DISP/2)*4) / PM_RUN_CYC * 100",
"MetricGroup": "l2_stats",
"MetricName": "l2_st_wr_util"
},
- {
- "BriefDescription": "L2 Cache Write Utilization (per core)",
- "MetricExpr": "((((PM_L2_LD_DISP - PM_L2_LD_HIT)/2)*4) / PM_RUN_CYC * 100) + (((PM_L2_ST_DISP/2)*4) / PM_RUN_CYC * 100)",
- "MetricGroup": "l2_stats",
- "MetricName": "l2_wr_util_percent"
- },
- {
- "BriefDescription": "Average number of cycles between L3 Load hits",
- "MetricExpr": "(PM_L3_LD_HIT / PM_RUN_CYC) / 2",
- "MetricGroup": "l3_stats",
- "MetricName": "l3_ld_hit_frequency"
- },
- {
- "BriefDescription": "Average number of cycles between L3 Load misses",
- "MetricExpr": "(PM_L3_LD_MISS / PM_RUN_CYC) / 2",
- "MetricGroup": "l3_stats",
- "MetricName": "l3_ld_miss_frequency"
- },
- {
- "BriefDescription": "Average number of Write-in machines used. 1 of 8 WI machines is sampled every L3 cycle",
- "MetricExpr": "(PM_L3_WI_USAGE / PM_RUN_CYC) * 8",
- "MetricGroup": "l3_stats",
- "MetricName": "l3_wi_usage"
- },
{
"BriefDescription": "Average icache miss latency",
"MetricExpr": "PM_IC_DEMAND_CYC / PM_IC_DEMAND_REQ",
--
2.27.0
next reply other threads:[~2021-02-24 18:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-24 18:14 Paul A. Clarke [this message]
2021-02-26 5:33 ` [PATCH] [perf] powerpc: Remove unsupported metrics kajoljain
2021-03-02 12:44 ` Arnaldo Carvalho de Melo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210224181436.782091-1-pc@us.ibm.com \
--to=pc@us.ibm.com \
--cc=acme@kernel.org \
--cc=ananth@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-perf-users@vger.kernel.org \
--cc=maddy@linux.vnet.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=naveen.n.rao@linux.vnet.ibm.com \
--cc=sukadev@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).