From: Douglas Anderson <dianders@chromium.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>,
Alexandru M Stan <amstan@chromium.org>,
Stephen Boyd <swboyd@chromium.org>,
Matthias Kaehlcke <mka@chromium.org>,
Jeykumar Sankaran <jsanka@codeaurora.org>,
Chandan Uddaraju <chandanu@codeaurora.org>,
Vara Reddy <varar@codeaurora.org>,
Tanmay Shah <tanmay@codeaurora.org>,
Douglas Anderson <dianders@chromium.org>,
Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 01/13] arm64: dts: qcom: sc7180: Update dts for DP phy inside QMP phy
Date: Mon, 1 Mar 2021 13:34:25 -0800 [thread overview]
Message-ID: <20210301133318.v2.1.Iad06142ceb8426ce5492737bf3d9162ed0dd2b55@changeid> (raw)
In-Reply-To: <20210301213437.4165775-1-dianders@chromium.org>
From: Stephen Boyd <swboyd@chromium.org>
Drop the old node and add the new one in its place.
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[dianders: Adjusted due to DP not itself not in upstream dts yet]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180.dtsi | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 1ea3344ab62c..60248a6757d8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2770,12 +2770,11 @@ usb_1_hsphy: phy@88e3000 {
};
usb_1_qmpphy: phy-wrapper@88e9000 {
- compatible = "qcom,sc7180-qmp-usb3-phy";
+ compatible = "qcom,sc7180-qmp-usb3-dp-phy";
reg = <0 0x088e9000 0 0x18c>,
- <0 0x088e8000 0 0x38>;
- reg-names = "reg-base", "dp_com";
+ <0 0x088e8000 0 0x38>,
+ <0 0x088ea000 0 0x40>;
status = "disabled";
- #clock-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -2790,7 +2789,7 @@ usb_1_qmpphy: phy-wrapper@88e9000 {
<&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- usb_1_ssphy: phy@88e9200 {
+ usb_1_ssphy: usb3-phy@88e9200 {
reg = <0 0x088e9200 0 0x128>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
@@ -2803,6 +2802,16 @@ usb_1_ssphy: phy@88e9200 {
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
};
+
+ dp_phy: dp-phy@88ea200 {
+ reg = <0 0x088ea200 0 0x200>,
+ <0 0x088ea400 0 0x200>,
+ <0 0x088eaa00 0 0x200>,
+ <0 0x088ea600 0 0x200>,
+ <0 0x088ea800 0 0x200>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
};
dc_noc: interconnect@9160000 {
@@ -3166,8 +3175,8 @@ dispcc: clock-controller@af00000 {
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&dsi_phy 0>,
<&dsi_phy 1>,
- <0>,
- <0>;
+ <&dp_phy 0>,
+ <&dp_phy 1>;
clock-names = "bi_tcxo",
"gcc_disp_gpll0_clk_src",
"dsi0_phy_pll_out_byteclk",
--
2.30.1.766.gb4fecdf3b7-goog
next prev parent reply other threads:[~2021-03-02 7:09 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-01 21:34 [PATCH v2 00/13] arm64: dts: qcom: Update sc7180-trogdor variants from downstream Douglas Anderson
2021-03-01 21:34 ` Douglas Anderson [this message]
2021-03-01 21:34 ` [PATCH v2 02/13] arm64: dts: qcom: Move sc7180 MI2S config to board files and make pulldown Douglas Anderson
2021-03-03 8:13 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 03/13] arm64: dts: qcom: Prep sc7180-trogdor trackpad IRQ for new boards Douglas Anderson
2021-03-03 8:14 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 04/13] arm64: dts: qcom: Unify the sc7180-trogdor panel nodes Douglas Anderson
2021-03-03 8:14 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 05/13] arm64: dts: qcom: trogdor: Only wakeup from pen eject Douglas Anderson
2021-03-01 21:34 ` [PATCH v2 06/13] arm64: dts: qcom: Disable camera clk on sc7180-trogdor devices by default Douglas Anderson
2021-03-01 21:34 ` [PATCH v2 07/13] arm64: dts: qcom: sc7180-trogdor: Remove fp control pins in prep for coachz Douglas Anderson
2021-03-03 8:15 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 08/13] arm64: dts: qcom: sc7180: Remove clock for bluetooth on Trogdor Douglas Anderson
2021-03-03 8:15 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 09/13] arm64: dts: qcom: sc7180: add GO_LAZOR variant property for lazor Douglas Anderson
2021-03-03 8:16 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 10/13] arm64: dts: qcom: sc7180: Set up lazor r3+ as sc7180-lite SKUs Douglas Anderson
2021-03-03 8:16 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 11/13] arm64: dts: qcom: Add sc7180-lazor-limozeen skus Douglas Anderson
2021-03-03 8:18 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 12/13] arm64: dts: qcom: Add sc7180-trogdor-pompom skus Douglas Anderson
2021-03-03 8:19 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 13/13] arm64: dts: qcom: Add sc7180-trogdor-coachz skus Douglas Anderson
2021-03-03 8:20 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210301133318.v2.1.Iad06142ceb8426ce5492737bf3d9162ed0dd2b55@changeid \
--to=dianders@chromium.org \
--cc=agross@kernel.org \
--cc=amstan@chromium.org \
--cc=bjorn.andersson@linaro.org \
--cc=chandanu@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=jsanka@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=robdclark@chromium.org \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
--cc=tanmay@codeaurora.org \
--cc=varar@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).