From: Douglas Anderson <dianders@chromium.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>,
Alexandru M Stan <amstan@chromium.org>,
Stephen Boyd <swboyd@chromium.org>,
Matthias Kaehlcke <mka@chromium.org>,
Douglas Anderson <dianders@chromium.org>,
Gwendal Grignou <gwendal@chromium.org>,
Tzung-Bi Shih <tzungbi@chromium.org>,
Judy Hsiao <judyhsiao@chromium.org>,
Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 13/13] arm64: dts: qcom: Add sc7180-trogdor-coachz skus
Date: Mon, 1 Mar 2021 13:34:37 -0800 [thread overview]
Message-ID: <20210301133318.v2.13.I3d1f5f8a3bf31e8014229df0d4cfdff20e9cc90f@changeid> (raw)
In-Reply-To: <20210301213437.4165775-1-dianders@chromium.org>
This is a trogdor variant. This is mostly a grab from the downstream
tree with notable exceptions:
- I skip -rev0. This was a super early build and there's no advantage
of long term support.
- I remove sound node since sound hasn't landed upstream yet.
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
NOTE: technically the "google,cros-ec-mkbp-proximity" binding hasn't
landed upstream yet. However it has a Reviewed-by from Rob and the
series in general sounds about ready to land. If necessary it can be
removed / readded later.
Changes in v2:
- Removed "i2c_wlc" as Stephen suggested.
- lazor => trogdor in subject
arch/arm64/boot/dts/qcom/Makefile | 4 +
.../dts/qcom/sc7180-trogdor-coachz-r1-lte.dts | 18 ++
.../dts/qcom/sc7180-trogdor-coachz-r1.dts | 154 +++++++++++
.../dts/qcom/sc7180-trogdor-coachz-r2-lte.dts | 18 ++
.../dts/qcom/sc7180-trogdor-coachz-r2.dts | 15 ++
.../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 240 ++++++++++++++++++
6 files changed, 449 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d7cdff3dad98..a81966d59cf7 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -31,6 +31,10 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
new file mode 100644
index 000000000000..533c048903ea
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-coachz-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google CoachZ (rev1) with LTE";
+ compatible = "google,coachz-rev1-sku0", "qcom,sc7180";
+};
+
+&cros_ec_proximity {
+ label = "proximity-wifi-lte";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
new file mode 100644
index 000000000000..86619f6c1134
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-coachz.dtsi"
+
+/ {
+ model = "Google CoachZ (rev1)";
+ compatible = "google,coachz-rev1", "qcom,sc7180";
+};
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "FP_TO_AP_IRQ_L",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "FPMCU_BOOT0",
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "WLC_IRQ",
+ "FP_RST_L",
+ "AMP_EN",
+ "WLC_NRST",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "",
+ "",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "EN_PP3300_DX_EDP",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "",
+ "AP_SPI_CS0_L",
+ "SD_CD_ODL",
+ "",
+ "",
+ "",
+ "",
+ "FPMCU_SEL",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT_L",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "DMIC_CLK_EN",
+ "HUB_EN",
+ "",
+ "AP_SPI_FP_MISO",
+ "AP_SPI_FP_MOSI",
+ "AP_SPI_FP_CLK",
+ "AP_SPI_FP_CS_L",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ dmic_clk_en: dmic_clk_en {
+ pinmux {
+ pins = "gpio83";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio83";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts
new file mode 100644
index 000000000000..6e7745801fae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-coachz-r2.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google CoachZ (rev2+) with LTE";
+ compatible = "google,coachz-sku0", "qcom,sc7180";
+};
+
+&cros_ec_proximity {
+ label = "proximity-wifi-lte";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts
new file mode 100644
index 000000000000..4f69b6ba299f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-coachz.dtsi"
+
+/ {
+ model = "Google CoachZ (rev2+)";
+ compatible = "google,coachz", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
new file mode 100644
index 000000000000..4ad520f00485
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180.dtsi"
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+
+/* Deleted nodes from trogdor.dtsi */
+
+/delete-node/ &alc5682;
+/delete-node/ &pp3300_codec;
+
+/ {
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+
+ adau7002: audio-codec-1 {
+ compatible = "adi,adau7002";
+ IOVDD-supply = <&pp1800_l15a>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&ap_spi_fp {
+ status = "okay";
+};
+
+&backlight {
+ pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+ status = "okay";
+};
+
+&cros_ec {
+ cros_ec_proximity: proximity {
+ compatible = "google,cros-ec-mkbp-proximity";
+ label = "proximity-wifi";
+ };
+};
+
+ap_ts_pen_1v8: &i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+
+ vdd-supply = <&pp3300_ts>;
+ };
+};
+
+&i2c7 {
+ status = "disabled";
+};
+
+&i2c9 {
+ status = "disabled";
+};
+
+&panel {
+ compatible = "boe,nv110wtm-n61";
+};
+
+&pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&sdhc_2 {
+ status = "okay";
+};
+
+&sn65dsi86_out {
+ data-lanes = <0 1 2 3>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+&ts_reset_l {
+ pinconf {
+ /*
+ * We want reset state by default and it will be up to the
+ * driver to disable this when it's ready.
+ */
+ output-low;
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "FP_TO_AP_IRQ_L",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "FPMCU_BOOT0",
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "WLC_IRQ",
+ "FP_RST_L",
+ "AMP_EN",
+ "WLC_NRST",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "",
+ "",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "SD_CD_ODL",
+ "",
+ "",
+ "",
+ "",
+ "EN_FP_RAILS",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT_L",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "",
+ "HUB_EN",
+ "",
+ "AP_SPI_FP_MISO",
+ "AP_SPI_FP_MOSI",
+ "AP_SPI_FP_CLK",
+ "AP_SPI_FP_CS_L",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+};
--
2.30.1.766.gb4fecdf3b7-goog
next prev parent reply other threads:[~2021-03-02 7:10 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-01 21:34 [PATCH v2 00/13] arm64: dts: qcom: Update sc7180-trogdor variants from downstream Douglas Anderson
2021-03-01 21:34 ` [PATCH v2 01/13] arm64: dts: qcom: sc7180: Update dts for DP phy inside QMP phy Douglas Anderson
2021-03-01 21:34 ` [PATCH v2 02/13] arm64: dts: qcom: Move sc7180 MI2S config to board files and make pulldown Douglas Anderson
2021-03-03 8:13 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 03/13] arm64: dts: qcom: Prep sc7180-trogdor trackpad IRQ for new boards Douglas Anderson
2021-03-03 8:14 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 04/13] arm64: dts: qcom: Unify the sc7180-trogdor panel nodes Douglas Anderson
2021-03-03 8:14 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 05/13] arm64: dts: qcom: trogdor: Only wakeup from pen eject Douglas Anderson
2021-03-01 21:34 ` [PATCH v2 06/13] arm64: dts: qcom: Disable camera clk on sc7180-trogdor devices by default Douglas Anderson
2021-03-01 21:34 ` [PATCH v2 07/13] arm64: dts: qcom: sc7180-trogdor: Remove fp control pins in prep for coachz Douglas Anderson
2021-03-03 8:15 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 08/13] arm64: dts: qcom: sc7180: Remove clock for bluetooth on Trogdor Douglas Anderson
2021-03-03 8:15 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 09/13] arm64: dts: qcom: sc7180: add GO_LAZOR variant property for lazor Douglas Anderson
2021-03-03 8:16 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 10/13] arm64: dts: qcom: sc7180: Set up lazor r3+ as sc7180-lite SKUs Douglas Anderson
2021-03-03 8:16 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 11/13] arm64: dts: qcom: Add sc7180-lazor-limozeen skus Douglas Anderson
2021-03-03 8:18 ` Stephen Boyd
2021-03-01 21:34 ` [PATCH v2 12/13] arm64: dts: qcom: Add sc7180-trogdor-pompom skus Douglas Anderson
2021-03-03 8:19 ` Stephen Boyd
2021-03-01 21:34 ` Douglas Anderson [this message]
2021-03-03 8:20 ` [PATCH v2 13/13] arm64: dts: qcom: Add sc7180-trogdor-coachz skus Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210301133318.v2.13.I3d1f5f8a3bf31e8014229df0d4cfdff20e9cc90f@changeid \
--to=dianders@chromium.org \
--cc=agross@kernel.org \
--cc=amstan@chromium.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gwendal@chromium.org \
--cc=judyhsiao@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=robdclark@chromium.org \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
--cc=tzungbi@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).