[v3,1/2] media: v4l2-ctrls: Add intra-refresh period control
diff mbox series

Message ID 20210302095340.3584204-2-stanimir.varbanov@linaro.org
State New, archived
Headers show
Series
  • Intra-refresh period control
Related show

Commit Message

Stanimir Varbanov March 2, 2021, 9:53 a.m. UTC
Add a control to set intra-refresh period.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
---
 .../userspace-api/media/v4l/ext-ctrls-codec.rst      | 12 ++++++++++++
 drivers/media/v4l2-core/v4l2-ctrls.c                 |  2 ++
 include/uapi/linux/v4l2-controls.h                   |  1 +
 3 files changed, 15 insertions(+)

Patch
diff mbox series

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 00944e97d638..49e6d364ded7 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1104,6 +1104,18 @@  enum v4l2_mpeg_video_h264_entropy_mode -
     macroblocks is refreshed until the cycle completes and starts from
     the top of the frame. Applicable to H264, H263 and MPEG4 encoder.
 
+``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (integer)``
+    Intra macroblock refresh period. This sets the period to refresh
+    the whole frame. In other words, this defines the number of frames
+    for which the whole frame will be intra-refreshed.  An example:
+    setting period to 1 means that the whole frame will be refreshed,
+    setting period to 2 means that the half of macroblocks will be
+    intra-refreshed on frameX and the other half of macroblocks
+    will be refreshed in frameX + 1 and so on. Setting period to zero
+    means no period is specified. Note that intra-refresh  is mutually
+    exclusive with V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB control.
+    Applicable to H264 and HEVC encoders.
+
 ``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)``
     Frame level rate control enable. If this control is disabled then
     the quantization parameter for each frame type is constant and set
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 016cf6204cbb..2ee463e08f1e 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -869,6 +869,7 @@  const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:	return "Decoder Slice Interface";
 	case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:	return "MPEG4 Loop Filter Enable";
 	case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB:	return "Number of Intra Refresh MBs";
+	case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD:		return "Intra Refresh Period";
 	case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:		return "Frame Level Rate Control Enable";
 	case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:			return "H264 MB Level Rate Control";
 	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:			return "Sequence Header Mode";
@@ -1276,6 +1277,7 @@  void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 		break;
 	case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE:
 	case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE:
+	case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD:
 		*type = V4L2_CTRL_TYPE_INTEGER;
 		break;
 	case V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME:
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index 039c0d7add1b..1fddd9f0d4f1 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -428,6 +428,7 @@  enum v4l2_mpeg_video_multi_slice_mode {
 #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE		(V4L2_CID_CODEC_BASE+228)
 #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME		(V4L2_CID_CODEC_BASE+229)
 #define V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID	(V4L2_CID_CODEC_BASE+230)
+#define V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD	(V4L2_CID_CODEC_BASE+231)
 
 /* CIDs for the MPEG-2 Part 2 (H.262) codec */
 #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL			(V4L2_CID_CODEC_BASE+270)