From: Avri Altman <avri.altman@wdc.com>
To: "James E . J . Bottomley" <jejb@linux.vnet.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: gregkh@linuxfoundation.org, Bart Van Assche <bvanassche@acm.org>,
yongmyung lee <ymhungry.lee@samsung.com>,
Daejun Park <daejun7.park@samsung.com>,
alim.akhtar@samsung.com, asutoshd@codeaurora.org,
Zang Leigang <zangleigang@hisilicon.com>,
Avi Shchislowski <avi.shchislowski@wdc.com>,
Bean Huo <beanhuo@micron.com>,
cang@codeaurora.org, stanley.chu@mediatek.com,
Avri Altman <avri.altman@wdc.com>
Subject: [PATCH v5 01/10] scsi: ufshpb: Cache HPB Control mode on init
Date: Tue, 2 Mar 2021 15:24:54 +0200 [thread overview]
Message-ID: <20210302132503.224670-2-avri.altman@wdc.com> (raw)
In-Reply-To: <20210302132503.224670-1-avri.altman@wdc.com>
We will use it later, when we'll need to differentiate between device
and host control modes.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
---
drivers/scsi/ufs/ufshcd.h | 2 ++
drivers/scsi/ufs/ufshpb.c | 8 +++++---
drivers/scsi/ufs/ufshpb.h | 2 ++
3 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 3ea7e88f5bff..2d589ee18875 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -656,6 +656,7 @@ struct ufs_hba_variant_params {
* @hpb_disabled: flag to check if HPB is disabled
* @max_hpb_single_cmd: maximum size of single HPB command
* @is_legacy: flag to check HPB 1.0
+ * @control_mode: either host or device
*/
struct ufshpb_dev_info {
int num_lu;
@@ -665,6 +666,7 @@ struct ufshpb_dev_info {
bool hpb_disabled;
int max_hpb_single_cmd;
bool is_legacy;
+ u8 control_mode;
};
#endif
diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index f89714a9785c..d9ea0cddc3c4 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -1624,6 +1624,9 @@ static void ufshpb_lu_parameter_init(struct ufs_hba *hba,
% (hpb->srgn_mem_size / HPB_ENTRY_SIZE);
hpb->pages_per_srgn = DIV_ROUND_UP(hpb->srgn_mem_size, PAGE_SIZE);
+
+ if (hpb_dev_info->control_mode == HPB_HOST_CONTROL)
+ hpb->is_hcm = true;
}
static int ufshpb_alloc_region_tbl(struct ufs_hba *hba, struct ufshpb_lu *hpb)
@@ -2308,11 +2311,10 @@ void ufshpb_get_dev_info(struct ufs_hba *hba, u8 *desc_buf)
{
struct ufshpb_dev_info *hpb_dev_info = &hba->ufshpb_dev;
int version, ret;
- u8 hpb_mode;
u32 max_hpb_sigle_cmd = 0;
- hpb_mode = desc_buf[DEVICE_DESC_PARAM_HPB_CONTROL];
- if (hpb_mode == HPB_HOST_CONTROL) {
+ hpb_dev_info->control_mode = desc_buf[DEVICE_DESC_PARAM_HPB_CONTROL];
+ if (hpb_dev_info->control_mode == HPB_HOST_CONTROL) {
dev_err(hba->dev, "%s: host control mode is not supported.\n",
__func__);
hpb_dev_info->hpb_disabled = true;
diff --git a/drivers/scsi/ufs/ufshpb.h b/drivers/scsi/ufs/ufshpb.h
index 88f424250dd9..14b7ba9bda3a 100644
--- a/drivers/scsi/ufs/ufshpb.h
+++ b/drivers/scsi/ufs/ufshpb.h
@@ -227,6 +227,8 @@ struct ufshpb_lu {
u32 entries_per_srgn_shift;
u32 pages_per_srgn;
+ bool is_hcm;
+
struct ufshpb_stats stats;
struct ufshpb_params params;
--
2.25.1
next prev parent reply other threads:[~2021-03-02 16:20 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-02 13:24 [PATCH v5 00/10] Add Host control mode to HPB Avri Altman
2021-03-02 13:24 ` Avri Altman [this message]
2021-03-02 13:24 ` [PATCH v5 02/10] scsi: ufshpb: Add host control mode support to rsp_upiu Avri Altman
2021-03-02 13:24 ` [PATCH v5 03/10] scsi: ufshpb: Add region's reads counter Avri Altman
2021-03-11 7:52 ` Can Guo
2021-03-11 8:04 ` Avri Altman
2021-03-11 8:07 ` Can Guo
2021-03-15 3:16 ` Can Guo
2021-03-15 9:20 ` Avri Altman
2021-03-15 9:31 ` Can Guo
2021-03-17 9:19 ` Avri Altman
2021-03-15 8:40 ` Can Guo
2021-03-15 9:22 ` Avri Altman
2021-03-02 13:24 ` [PATCH v5 04/10] scsi: ufshpb: Make eviction depends on region's reads Avri Altman
2021-03-11 7:53 ` Can Guo
2021-03-11 8:06 ` Avri Altman
2021-03-15 8:30 ` Can Guo
2021-03-16 8:34 ` Avri Altman
2021-03-02 13:24 ` [PATCH v5 05/10] scsi: ufshpb: Region inactivation in host mode Avri Altman
2021-03-11 8:20 ` Can Guo
2021-03-11 9:03 ` Avri Altman
2021-03-15 4:02 ` Can Guo
2021-03-15 7:33 ` Can Guo
2021-03-16 8:30 ` Avri Altman
2021-03-17 1:23 ` Can Guo
[not found] ` <CGME20210316083014epcas2p32d6b84e689cdbe06ee065c870b236d65@epcms2p3>
2021-03-17 2:28 ` Daejun Park
2021-03-17 4:41 ` Can Guo
2021-03-17 7:59 ` Avri Altman
[not found] ` <CGME20210316083014epcas2p32d6b84e689cdbe06ee065c870b236d65@epcms2p4>
2021-03-17 5:19 ` Daejun Park
2021-03-17 5:34 ` Can Guo
[not found] ` <CGME20210316083014epcas2p32d6b84e689cdbe06ee065c870b236d65@epcms2p6>
2021-03-17 5:42 ` Daejun Park
2021-03-02 13:24 ` [PATCH v5 06/10] scsi: ufshpb: Add hpb dev reset response Avri Altman
2021-03-15 1:34 ` Can Guo
2021-03-15 6:40 ` Can Guo
2021-03-15 7:42 ` Avri Altman
2021-03-17 10:56 ` Can Guo
2021-03-17 11:23 ` Avri Altman
2021-03-17 12:12 ` Can Guo
2021-03-17 12:22 ` Avri Altman
2021-03-17 13:50 ` Can Guo
2021-03-17 14:22 ` Avri Altman
2021-03-17 14:36 ` Can Guo
2021-03-17 15:46 ` Avri Altman
2021-03-18 1:00 ` Can Guo
2021-03-18 8:04 ` Avri Altman
2021-03-02 13:25 ` [PATCH v5 07/10] scsi: ufshpb: Add "Cold" regions timer Avri Altman
2021-03-15 1:37 ` Can Guo
2021-03-15 7:54 ` Avri Altman
2021-03-15 9:36 ` Can Guo
2021-03-16 9:21 ` Avri Altman
2021-03-17 2:45 ` Can Guo
2021-03-17 7:55 ` Avri Altman
2021-06-01 16:22 ` Bart Van Assche
2021-03-02 13:25 ` [PATCH v5 08/10] scsi: ufshpb: Limit the number of inflight map requests Avri Altman
2021-03-15 8:31 ` Can Guo
2021-03-16 8:32 ` Avri Altman
2021-03-02 13:25 ` [PATCH v5 09/10] scsi: ufshpb: Add support for host control mode Avri Altman
2021-03-02 13:25 ` [PATCH v5 10/10] scsi: ufshpb: Make host mode parameters configurable Avri Altman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210302132503.224670-2-avri.altman@wdc.com \
--to=avri.altman@wdc.com \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avi.shchislowski@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=daejun7.park@samsung.com \
--cc=gregkh@linuxfoundation.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stanley.chu@mediatek.com \
--cc=ymhungry.lee@samsung.com \
--cc=zangleigang@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).