[PATCH v1 4/5] mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-kernel@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Subject: [PATCH v1 4/5] mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
Date: Tue,  2 Mar 2021 15:56:19 +0200	[thread overview]
Message-ID: <20210302135620.89958-4-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20210302135620.89958-1-andriy.shevchenko@linux.intel.com>

I²C header provides a descriptive definitions for standard bus speeds.
Use them instead of plain numbers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/mfd/intel_quark_i2c_gpio.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
index 053780539175..7af22d1399e1 100644
--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -16,6 +16,7 @@
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/dmi.h>
+#include <linux/i2c.h>
 #include <linux/platform_data/gpio-dwapb.h>
 #include <linux/platform_data/i2c-designware.h>
 
@@ -54,19 +55,19 @@ static const struct dmi_system_id dmi_platform_info[] = {
 		.matches = {
 			DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"),
 		},
-		.driver_data = (void *)100000,
+		.driver_data = (void *)I2C_MAX_STANDARD_MODE_FREQ,
 	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
 		},
-		.driver_data = (void *)400000,
+		.driver_data = (void *)I2C_MAX_FAST_MODE_FREQ,
 	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
 		},
-		.driver_data = (void *)400000,
+		.driver_data = (void *)I2C_MAX_FAST_MODE_FREQ,
 	},
 	{}
 };
@@ -176,7 +177,7 @@ static int intel_quark_i2c_setup(struct pci_dev *pdev, struct mfd_cell *cell)
 		return -ENOMEM;
 
 	/* Normal mode by default */
-	pdata->i2c_scl_freq = 100000;
+	pdata->i2c_scl_freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	dmi_id = dmi_first_match(dmi_platform_info);
 	if (dmi_id)
-- 
2.30.1

