From: Quentin Perret <qperret@google.com>
To: catalin.marinas@arm.com, will@kernel.org, maz@kernel.org,
james.morse@arm.com, julien.thierry.kdev@gmail.com,
suzuki.poulose@arm.com
Cc: android-kvm@google.com, linux-kernel@vger.kernel.org,
kernel-team@android.com, kvmarm@lists.cs.columbia.edu,
linux-arm-kernel@lists.infradead.org, tabba@google.com,
mark.rutland@arm.com, dbrazdil@google.com, mate.toth-pal@arm.com,
seanjc@google.com, qperret@google.com, robh+dt@kernel.org
Subject: [PATCH v3 23/32] KVM: arm64: Make memcache anonymous in pgtable allocator
Date: Tue, 2 Mar 2021 14:59:53 +0000 [thread overview]
Message-ID: <20210302150002.3685113-24-qperret@google.com> (raw)
In-Reply-To: <20210302150002.3685113-1-qperret@google.com>
The current stage2 page-table allocator uses a memcache to get
pre-allocated pages when it needs any. To allow re-using this code at
EL2 which uses a concept of memory pools, make the memcache argument of
kvm_pgtable_stage2_map() anonymous, and let the mm_ops zalloc_page()
callbacks use it the way they need to.
Signed-off-by: Quentin Perret <qperret@google.com>
---
arch/arm64/include/asm/kvm_pgtable.h | 6 +++---
arch/arm64/kvm/hyp/pgtable.c | 4 ++--
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h
index 21e0985d2e00..9935dbae2cc1 100644
--- a/arch/arm64/include/asm/kvm_pgtable.h
+++ b/arch/arm64/include/asm/kvm_pgtable.h
@@ -213,8 +213,8 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt);
* @size: Size of the mapping.
* @phys: Physical address of the memory to map.
* @prot: Permissions and attributes for the mapping.
- * @mc: Cache of pre-allocated GFP_PGTABLE_USER memory from which to
- * allocate page-table pages.
+ * @mc: Cache of pre-allocated and zeroed memory from which to allocate
+ * page-table pages.
*
* The offset of @addr within a page is ignored, @size is rounded-up to
* the next page boundary and @phys is rounded-down to the previous page
@@ -236,7 +236,7 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt);
*/
int kvm_pgtable_stage2_map(struct kvm_pgtable *pgt, u64 addr, u64 size,
u64 phys, enum kvm_pgtable_prot prot,
- struct kvm_mmu_memory_cache *mc);
+ void *mc);
/**
* kvm_pgtable_stage2_unmap() - Remove a mapping from a guest stage-2 page-table.
diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
index 296675e5600d..bdd6e3d4eeb6 100644
--- a/arch/arm64/kvm/hyp/pgtable.c
+++ b/arch/arm64/kvm/hyp/pgtable.c
@@ -445,7 +445,7 @@ struct stage2_map_data {
kvm_pte_t *anchor;
struct kvm_s2_mmu *mmu;
- struct kvm_mmu_memory_cache *memcache;
+ void *memcache;
struct kvm_pgtable_mm_ops *mm_ops;
};
@@ -669,7 +669,7 @@ static int stage2_map_walker(u64 addr, u64 end, u32 level, kvm_pte_t *ptep,
int kvm_pgtable_stage2_map(struct kvm_pgtable *pgt, u64 addr, u64 size,
u64 phys, enum kvm_pgtable_prot prot,
- struct kvm_mmu_memory_cache *mc)
+ void *mc)
{
int ret;
struct stage2_map_data map_data = {
--
2.30.1.766.gb4fecdf3b7-goog
next prev parent reply other threads:[~2021-03-02 17:23 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-02 14:59 [PATCH v3 00/32] KVM: arm64: A stage 2 for the host Quentin Perret
2021-03-02 14:59 ` [PATCH v3 01/32] arm64: lib: Annotate {clear,copy}_page() as position-independent Quentin Perret
2021-03-02 14:59 ` [PATCH v3 02/32] KVM: arm64: Link position-independent string routines into .hyp.text Quentin Perret
2021-03-02 14:59 ` [PATCH v3 03/32] arm64: kvm: Add standalone ticket spinlock implementation for use at hyp Quentin Perret
2021-03-02 14:59 ` [PATCH v3 04/32] KVM: arm64: Initialize kvm_nvhe_init_params early Quentin Perret
2021-03-04 13:39 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 05/32] KVM: arm64: Avoid free_page() in page-table allocator Quentin Perret
2021-03-02 14:59 ` [PATCH v3 06/32] KVM: arm64: Factor memory allocation out of pgtable.c Quentin Perret
2021-03-04 14:06 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 07/32] KVM: arm64: Introduce a BSS section for use at Hyp Quentin Perret
2021-03-04 14:09 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 08/32] KVM: arm64: Make kvm_call_hyp() a function call " Quentin Perret
2021-03-02 14:59 ` [PATCH v3 09/32] KVM: arm64: Allow using kvm_nvhe_sym() in hyp code Quentin Perret
2021-03-02 14:59 ` [PATCH v3 10/32] KVM: arm64: Introduce an early Hyp page allocator Quentin Perret
2021-03-04 14:38 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 11/32] KVM: arm64: Stub CONFIG_DEBUG_LIST at Hyp Quentin Perret
2021-03-02 14:59 ` [PATCH v3 12/32] KVM: arm64: Introduce a Hyp buddy page allocator Quentin Perret
2021-03-04 15:30 ` Will Deacon
2021-03-04 15:49 ` Quentin Perret
2021-03-02 14:59 ` [PATCH v3 13/32] KVM: arm64: Enable access to sanitized CPU features at EL2 Quentin Perret
2021-03-02 14:59 ` [PATCH v3 14/32] KVM: arm64: Factor out vector address calculation Quentin Perret
2021-03-02 14:59 ` [PATCH v3 15/32] KVM: arm64: Prepare the creation of s1 mappings at EL2 Quentin Perret
2021-03-04 18:47 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 16/32] KVM: arm64: Elevate hypervisor mappings creation " Quentin Perret
2021-03-04 19:25 ` Will Deacon
2021-03-05 9:14 ` Quentin Perret
2021-03-02 14:59 ` [PATCH v3 17/32] KVM: arm64: Use kvm_arch for stage 2 pgtable Quentin Perret
2021-03-02 14:59 ` [PATCH v3 18/32] KVM: arm64: Use kvm_arch in kvm_s2_mmu Quentin Perret
2021-03-02 14:59 ` [PATCH v3 19/32] KVM: arm64: Set host stage 2 using kvm_nvhe_init_params Quentin Perret
2021-03-02 14:59 ` [PATCH v3 20/32] KVM: arm64: Refactor kvm_arm_setup_stage2() Quentin Perret
2021-03-04 19:35 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 21/32] KVM: arm64: Refactor __load_guest_stage2() Quentin Perret
2021-03-02 14:59 ` [PATCH v3 22/32] KVM: arm64: Refactor __populate_fault_info() Quentin Perret
2021-03-04 19:39 ` Will Deacon
2021-03-02 14:59 ` Quentin Perret [this message]
2021-03-04 19:44 ` [PATCH v3 23/32] KVM: arm64: Make memcache anonymous in pgtable allocator Will Deacon
2021-03-02 14:59 ` [PATCH v3 24/32] KVM: arm64: Reserve memory for host stage 2 Quentin Perret
2021-03-04 19:49 ` Will Deacon
2021-03-05 9:17 ` Quentin Perret
2021-03-02 14:59 ` [PATCH v3 25/32] KVM: arm64: Sort the hypervisor memblocks Quentin Perret
2021-03-04 19:51 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 26/32] KVM: arm64: Introduce PROT_NONE mappings for stage 2 Quentin Perret
2021-03-04 20:00 ` Will Deacon
2021-03-05 9:52 ` Quentin Perret
2021-03-05 19:03 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 27/32] KVM: arm64: Refactor stage2_map_set_prot_attr() Quentin Perret
2021-03-04 20:03 ` Will Deacon
2021-03-05 9:18 ` Quentin Perret
2021-03-02 14:59 ` [PATCH v3 28/32] KVM: arm64: Add kvm_pgtable_stage2_idmap_greedy() Quentin Perret
2021-03-05 14:39 ` Will Deacon
2021-03-05 15:03 ` Quentin Perret
2021-03-05 16:59 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 29/32] KVM: arm64: Wrap the host with a stage 2 Quentin Perret
2021-03-05 19:29 ` Will Deacon
2021-03-08 9:22 ` Quentin Perret
2021-03-08 12:46 ` Will Deacon
2021-03-08 13:38 ` Quentin Perret
2021-03-08 13:52 ` Will Deacon
2021-03-02 15:00 ` [PATCH v3 30/32] KVM: arm64: Page-align the .hyp sections Quentin Perret
2021-03-04 20:05 ` Will Deacon
2021-03-02 15:00 ` [PATCH v3 31/32] KVM: arm64: Disable PMU support in protected mode Quentin Perret
2021-03-05 19:02 ` Will Deacon
2021-03-02 15:00 ` [PATCH v3 32/32] KVM: arm64: Protect the .hyp sections from the host Quentin Perret
2021-03-05 19:13 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210302150002.3685113-24-qperret@google.com \
--to=qperret@google.com \
--cc=android-kvm@google.com \
--cc=catalin.marinas@arm.com \
--cc=dbrazdil@google.com \
--cc=james.morse@arm.com \
--cc=julien.thierry.kdev@gmail.com \
--cc=kernel-team@android.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mate.toth-pal@arm.com \
--cc=maz@kernel.org \
--cc=robh+dt@kernel.org \
--cc=seanjc@google.com \
--cc=suzuki.poulose@arm.com \
--cc=tabba@google.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).