From: Quentin Perret <qperret@google.com>
To: catalin.marinas@arm.com, will@kernel.org, maz@kernel.org,
james.morse@arm.com, julien.thierry.kdev@gmail.com,
suzuki.poulose@arm.com
Cc: android-kvm@google.com, linux-kernel@vger.kernel.org,
kernel-team@android.com, kvmarm@lists.cs.columbia.edu,
linux-arm-kernel@lists.infradead.org, tabba@google.com,
mark.rutland@arm.com, dbrazdil@google.com, mate.toth-pal@arm.com,
seanjc@google.com, qperret@google.com, robh+dt@kernel.org
Subject: [PATCH v3 30/32] KVM: arm64: Page-align the .hyp sections
Date: Tue, 2 Mar 2021 15:00:00 +0000 [thread overview]
Message-ID: <20210302150002.3685113-31-qperret@google.com> (raw)
In-Reply-To: <20210302150002.3685113-1-qperret@google.com>
We will soon unmap the .hyp sections from the host stage 2 in Protected
nVHE mode, which obvisouly works with at least page granularity, so make
sure to align them correctly.
Signed-off-by: Quentin Perret <qperret@google.com>
---
arch/arm64/kernel/vmlinux.lds.S | 22 +++++++++-------------
1 file changed, 9 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index e96173ce211b..709d2c433c5e 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -15,9 +15,11 @@
#define HYPERVISOR_DATA_SECTIONS \
HYP_SECTION_NAME(.rodata) : { \
+ . = ALIGN(PAGE_SIZE); \
__hyp_rodata_start = .; \
*(HYP_SECTION_NAME(.data..ro_after_init)) \
*(HYP_SECTION_NAME(.rodata)) \
+ . = ALIGN(PAGE_SIZE); \
__hyp_rodata_end = .; \
}
@@ -72,21 +74,14 @@ ENTRY(_text)
jiffies = jiffies_64;
#define HYPERVISOR_TEXT \
- /* \
- * Align to 4 KB so that \
- * a) the HYP vector table is at its minimum \
- * alignment of 2048 bytes \
- * b) the HYP init code will not cross a page \
- * boundary if its size does not exceed \
- * 4 KB (see related ASSERT() below) \
- */ \
- . = ALIGN(SZ_4K); \
+ . = ALIGN(PAGE_SIZE); \
__hyp_idmap_text_start = .; \
*(.hyp.idmap.text) \
__hyp_idmap_text_end = .; \
__hyp_text_start = .; \
*(.hyp.text) \
HYPERVISOR_EXTABLE \
+ . = ALIGN(PAGE_SIZE); \
__hyp_text_end = .;
#define IDMAP_TEXT \
@@ -322,11 +317,12 @@ SECTIONS
#include "image-vars.h"
/*
- * The HYP init code and ID map text can't be longer than a page each,
- * and should not cross a page boundary.
+ * The HYP init code and ID map text can't be longer than a page each. The
+ * former is page-aligned, but the latter may not be with 16K or 64K pages, so
+ * it should also not cross a page boundary.
*/
-ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & ~(SZ_4K - 1)) <= SZ_4K,
- "HYP init code too big or misaligned")
+ASSERT(__hyp_idmap_text_end - __hyp_idmap_text_start <= PAGE_SIZE,
+ "HYP init code too big")
ASSERT(__idmap_text_end - (__idmap_text_start & ~(SZ_4K - 1)) <= SZ_4K,
"ID map text too big or misaligned")
#ifdef CONFIG_HIBERNATION
--
2.30.1.766.gb4fecdf3b7-goog
next prev parent reply other threads:[~2021-03-02 18:08 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-02 14:59 [PATCH v3 00/32] KVM: arm64: A stage 2 for the host Quentin Perret
2021-03-02 14:59 ` [PATCH v3 01/32] arm64: lib: Annotate {clear,copy}_page() as position-independent Quentin Perret
2021-03-02 14:59 ` [PATCH v3 02/32] KVM: arm64: Link position-independent string routines into .hyp.text Quentin Perret
2021-03-02 14:59 ` [PATCH v3 03/32] arm64: kvm: Add standalone ticket spinlock implementation for use at hyp Quentin Perret
2021-03-02 14:59 ` [PATCH v3 04/32] KVM: arm64: Initialize kvm_nvhe_init_params early Quentin Perret
2021-03-04 13:39 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 05/32] KVM: arm64: Avoid free_page() in page-table allocator Quentin Perret
2021-03-02 14:59 ` [PATCH v3 06/32] KVM: arm64: Factor memory allocation out of pgtable.c Quentin Perret
2021-03-04 14:06 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 07/32] KVM: arm64: Introduce a BSS section for use at Hyp Quentin Perret
2021-03-04 14:09 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 08/32] KVM: arm64: Make kvm_call_hyp() a function call " Quentin Perret
2021-03-02 14:59 ` [PATCH v3 09/32] KVM: arm64: Allow using kvm_nvhe_sym() in hyp code Quentin Perret
2021-03-02 14:59 ` [PATCH v3 10/32] KVM: arm64: Introduce an early Hyp page allocator Quentin Perret
2021-03-04 14:38 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 11/32] KVM: arm64: Stub CONFIG_DEBUG_LIST at Hyp Quentin Perret
2021-03-02 14:59 ` [PATCH v3 12/32] KVM: arm64: Introduce a Hyp buddy page allocator Quentin Perret
2021-03-04 15:30 ` Will Deacon
2021-03-04 15:49 ` Quentin Perret
2021-03-02 14:59 ` [PATCH v3 13/32] KVM: arm64: Enable access to sanitized CPU features at EL2 Quentin Perret
2021-03-02 14:59 ` [PATCH v3 14/32] KVM: arm64: Factor out vector address calculation Quentin Perret
2021-03-02 14:59 ` [PATCH v3 15/32] KVM: arm64: Prepare the creation of s1 mappings at EL2 Quentin Perret
2021-03-04 18:47 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 16/32] KVM: arm64: Elevate hypervisor mappings creation " Quentin Perret
2021-03-04 19:25 ` Will Deacon
2021-03-05 9:14 ` Quentin Perret
2021-03-02 14:59 ` [PATCH v3 17/32] KVM: arm64: Use kvm_arch for stage 2 pgtable Quentin Perret
2021-03-02 14:59 ` [PATCH v3 18/32] KVM: arm64: Use kvm_arch in kvm_s2_mmu Quentin Perret
2021-03-02 14:59 ` [PATCH v3 19/32] KVM: arm64: Set host stage 2 using kvm_nvhe_init_params Quentin Perret
2021-03-02 14:59 ` [PATCH v3 20/32] KVM: arm64: Refactor kvm_arm_setup_stage2() Quentin Perret
2021-03-04 19:35 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 21/32] KVM: arm64: Refactor __load_guest_stage2() Quentin Perret
2021-03-02 14:59 ` [PATCH v3 22/32] KVM: arm64: Refactor __populate_fault_info() Quentin Perret
2021-03-04 19:39 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 23/32] KVM: arm64: Make memcache anonymous in pgtable allocator Quentin Perret
2021-03-04 19:44 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 24/32] KVM: arm64: Reserve memory for host stage 2 Quentin Perret
2021-03-04 19:49 ` Will Deacon
2021-03-05 9:17 ` Quentin Perret
2021-03-02 14:59 ` [PATCH v3 25/32] KVM: arm64: Sort the hypervisor memblocks Quentin Perret
2021-03-04 19:51 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 26/32] KVM: arm64: Introduce PROT_NONE mappings for stage 2 Quentin Perret
2021-03-04 20:00 ` Will Deacon
2021-03-05 9:52 ` Quentin Perret
2021-03-05 19:03 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 27/32] KVM: arm64: Refactor stage2_map_set_prot_attr() Quentin Perret
2021-03-04 20:03 ` Will Deacon
2021-03-05 9:18 ` Quentin Perret
2021-03-02 14:59 ` [PATCH v3 28/32] KVM: arm64: Add kvm_pgtable_stage2_idmap_greedy() Quentin Perret
2021-03-05 14:39 ` Will Deacon
2021-03-05 15:03 ` Quentin Perret
2021-03-05 16:59 ` Will Deacon
2021-03-02 14:59 ` [PATCH v3 29/32] KVM: arm64: Wrap the host with a stage 2 Quentin Perret
2021-03-05 19:29 ` Will Deacon
2021-03-08 9:22 ` Quentin Perret
2021-03-08 12:46 ` Will Deacon
2021-03-08 13:38 ` Quentin Perret
2021-03-08 13:52 ` Will Deacon
2021-03-02 15:00 ` Quentin Perret [this message]
2021-03-04 20:05 ` [PATCH v3 30/32] KVM: arm64: Page-align the .hyp sections Will Deacon
2021-03-02 15:00 ` [PATCH v3 31/32] KVM: arm64: Disable PMU support in protected mode Quentin Perret
2021-03-05 19:02 ` Will Deacon
2021-03-02 15:00 ` [PATCH v3 32/32] KVM: arm64: Protect the .hyp sections from the host Quentin Perret
2021-03-05 19:13 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210302150002.3685113-31-qperret@google.com \
--to=qperret@google.com \
--cc=android-kvm@google.com \
--cc=catalin.marinas@arm.com \
--cc=dbrazdil@google.com \
--cc=james.morse@arm.com \
--cc=julien.thierry.kdev@gmail.com \
--cc=kernel-team@android.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mate.toth-pal@arm.com \
--cc=maz@kernel.org \
--cc=robh+dt@kernel.org \
--cc=seanjc@google.com \
--cc=suzuki.poulose@arm.com \
--cc=tabba@google.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).