From: Lucas Tanure <tanureal@opensource.cirrus.com>
To: James Schulman <james.schulman@cirrus.com>,
David Rhodes <david.rhodes@cirrus.com>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>,
<alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
Lucas Tanure <tanureal@opensource.cirrus.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH 15/15] ASoC: cs42l42: Fix mixer volume control
Date: Tue, 2 Mar 2021 17:04:54 +0000 [thread overview]
Message-ID: <20210302170454.39679-16-tanureal@opensource.cirrus.com> (raw)
In-Reply-To: <20210302170454.39679-1-tanureal@opensource.cirrus.com>
The minimum value is 0x3f (-63dB), which also is mute
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
---
sound/soc/codecs/cs42l42.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 96f4e98ceaa0b..39f742a83cd2c 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -401,7 +401,7 @@ static const struct regmap_config cs42l42_regmap = {
};
static DECLARE_TLV_DB_SCALE(adc_tlv, -9600, 100, false);
-static DECLARE_TLV_DB_SCALE(mixer_tlv, -6200, 100, false);
+static DECLARE_TLV_DB_SCALE(mixer_tlv, -6300, 100, true);
static const char * const cs42l42_hpf_freq_text[] = {
"1.86Hz", "120Hz", "235Hz", "466Hz"
@@ -458,7 +458,7 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
CS42L42_DAC_HPF_EN_SHIFT, true, false),
SOC_DOUBLE_R_TLV("Mixer Volume", CS42L42_MIXER_CHA_VOL,
CS42L42_MIXER_CHB_VOL, CS42L42_MIXER_CH_VOL_SHIFT,
- 0x3e, 1, mixer_tlv)
+ 0x3f, 1, mixer_tlv)
};
static const struct snd_soc_dapm_widget cs42l42_dapm_widgets[] = {
--
2.30.1
next prev parent reply other threads:[~2021-03-02 20:31 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-02 17:04 [PATCH 00/15] Report jack and button detection + Capture Support Lucas Tanure
2021-03-02 17:04 ` [PATCH 01/15] ASoC: cs42l42: Don't enable/disable regulator at Bias Level Lucas Tanure
2021-03-02 17:04 ` [PATCH 02/15] ASoC: cs42l42: Always wait at least 3ms after reset Lucas Tanure
2021-03-02 17:04 ` [PATCH 03/15] ASoC: cs42l42: Remove power if the driver is being removed Lucas Tanure
2021-03-02 17:12 ` Mark Brown
2021-03-02 17:04 ` [PATCH 04/15] ASoC: cs42l42: Disable regulators if probe fails Lucas Tanure
2021-03-02 17:04 ` [PATCH 05/15] ASoC: cs42l42: Fix Bitclock polarity inversion Lucas Tanure
2021-03-02 17:15 ` Mark Brown
2021-03-02 17:04 ` [PATCH 06/15] ASoC: cs42l42: Provide finer control on playback path Lucas Tanure
2021-03-02 17:04 ` [PATCH 07/15] ASoC: cs42l42: Set clock source for both ways of stream Lucas Tanure
2021-03-03 0:02 ` kernel test robot
2021-03-02 17:04 ` [PATCH 08/15] ASoC: cs42l42: Fix channel width support Lucas Tanure
2021-03-02 17:20 ` Mark Brown
2021-03-02 17:04 ` [PATCH 09/15] ASoC: cs42l42: Add Capture Support Lucas Tanure
2021-03-02 17:04 ` [PATCH 10/15] ASoC: cs42l42: Report jack and button detection Lucas Tanure
2021-03-02 17:29 ` Mark Brown
2021-03-02 17:04 ` [PATCH 11/15] ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called Lucas Tanure
2021-03-02 17:04 ` [PATCH 12/15] ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT Lucas Tanure
2021-03-02 17:30 ` Mark Brown
2021-03-02 22:56 ` kernel test robot
2021-03-02 22:56 ` [PATCH] ASoC: cs42l42: fix semicolon.cocci warnings kernel test robot
2021-03-02 17:04 ` [PATCH 13/15] ASoC: cs42l42: Only start PLL if it is needed Lucas Tanure
2021-03-02 17:04 ` [PATCH 14/15] ASoC: cs42l42: Wait for PLL to lock before switching to it Lucas Tanure
2021-03-02 17:04 ` Lucas Tanure [this message]
2021-03-02 17:30 ` [PATCH 15/15] ASoC: cs42l42: Fix mixer volume control Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210302170454.39679-16-tanureal@opensource.cirrus.com \
--to=tanureal@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=david.rhodes@cirrus.com \
--cc=james.schulman@cirrus.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=rf@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).