From: "Álvaro Fernández Rojas" <noltari@gmail.com>
To: "Michael Walle" <michael@walle.cc>,
f.fainelli@gmail.com, "Linus Walleij" <linus.walleij@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Álvaro Fernández Rojas" <noltari@gmail.com>,
"Jonas Gorski" <jonas.gorski@gmail.com>,
"Necip Fazil Yildiran" <fazilyildiran@gmail.com>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 11/12] Documentation: add BCM6318 pincontroller binding documentation
Date: Tue, 2 Mar 2021 20:16:12 +0100 [thread overview]
Message-ID: <20210302191613.29476-12-noltari@gmail.com> (raw)
In-Reply-To: <20210302191613.29476-1-noltari@gmail.com>
Add binding documentation for the pincontrol core found in BCM6318 SoCs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
v2: remove interrupts
.../pinctrl/brcm,bcm6318-pinctrl.yaml | 161 ++++++++++++++++++
1 file changed, 161 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
new file mode 100644
index 000000000000..d6fd8ab68180
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6318 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm6318-pinctrl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ Specifies the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+patternProperties:
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led,
+ ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led,
+ serial_led_data, serial_led_clk, inet_act_led, inet_fail_led,
+ dsl_led, post_fail_led, wlan_wps_led, usb_pwron,
+ usb_device_led, usb_active ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
+
+required:
+ - compatible
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@10000080 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x10000080 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm6318-pinctrl";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl_ephy0_spd_led: ephy0_spd_led {
+ function = "ephy0_spd_led";
+ pins = "gpio0";
+ };
+
+ pinctrl_ephy1_spd_led: ephy1_spd_led {
+ function = "ephy1_spd_led";
+ pins = "gpio1";
+ };
+
+ pinctrl_ephy2_spd_led: ephy2_spd_led {
+ function = "ephy2_spd_led";
+ pins = "gpio2";
+ };
+
+ pinctrl_ephy3_spd_led: ephy3_spd_led {
+ function = "ephy3_spd_led";
+ pins = "gpio3";
+ };
+
+ pinctrl_ephy0_act_led: ephy0_act_led {
+ function = "ephy0_act_led";
+ pins = "gpio4";
+ };
+
+ pinctrl_ephy1_act_led: ephy1_act_led {
+ function = "ephy1_act_led";
+ pins = "gpio5";
+ };
+
+ pinctrl_ephy2_act_led: ephy2_act_led {
+ function = "ephy2_act_led";
+ pins = "gpio6";
+ };
+
+ pinctrl_ephy3_act_led: ephy3_act_led {
+ function = "ephy3_act_led";
+ pins = "gpio7";
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio6";
+ };
+
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio7";
+ };
+ };
+
+ pinctrl_inet_act_led: inet_act_led {
+ function = "inet_act_led";
+ pins = "gpio8";
+ };
+
+ pinctrl_inet_fail_led: inet_fail_led {
+ function = "inet_fail_led";
+ pins = "gpio9";
+ };
+
+ pinctrl_dsl_led: dsl_led {
+ function = "dsl_led";
+ pins = "gpio10";
+ };
+
+ pinctrl_post_fail_led: post_fail_led {
+ function = "post_fail_led";
+ pins = "gpio11";
+ };
+
+ pinctrl_wlan_wps_led: wlan_wps_led {
+ function = "wlan_wps_led";
+ pins = "gpio12";
+ };
+
+ pinctrl_usb_pwron: usb_pwron {
+ function = "usb_pwron";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_device_led: usb_device_led {
+ function = "usb_device_led";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_active: usb_active {
+ function = "usb_active";
+ pins = "gpio40";
+ };
+ };
+ };
--
2.20.1
next prev parent reply other threads:[~2021-03-02 22:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-02 19:16 [PATCH v2 00/12] pinctrl: add BCM63XX pincontrol support Álvaro Fernández Rojas
2021-03-02 19:16 ` [PATCH v2 01/12] Documentation: add BCM6328 pincontroller binding documentation Álvaro Fernández Rojas
2021-03-02 19:16 ` [PATCH v2 02/12] pinctrl: add a pincontrol driver for BCM6328 Álvaro Fernández Rojas
2021-03-02 20:01 ` Michael Walle
2021-03-02 19:16 ` [PATCH v2 03/12] Documentation: add BCM6358 pincontroller binding documentation Álvaro Fernández Rojas
2021-03-02 19:16 ` [PATCH v2 04/12] pinctrl: add a pincontrol driver for BCM6358 Álvaro Fernández Rojas
2021-03-02 19:16 ` [PATCH v2 05/12] Documentation: add BCM6362 pincontroller binding documentation Álvaro Fernández Rojas
2021-03-02 19:16 ` [PATCH v2 06/12] pinctrl: add a pincontrol driver for BCM6362 Álvaro Fernández Rojas
2021-03-02 19:16 ` [PATCH v2 07/12] Documentation: add BCM6368 pincontroller binding documentation Álvaro Fernández Rojas
2021-03-02 19:16 ` [PATCH v2 08/12] pinctrl: add a pincontrol driver for BCM6368 Álvaro Fernández Rojas
2021-03-02 19:16 ` [PATCH v2 09/12] Documentation: add BCM63268 pincontroller binding documentation Álvaro Fernández Rojas
2021-03-02 19:16 ` [PATCH v2 10/12] pinctrl: add a pincontrol driver for BCM63268 Álvaro Fernández Rojas
2021-03-02 19:16 ` Álvaro Fernández Rojas [this message]
2021-03-02 19:16 ` [PATCH v2 12/12] pinctrl: add a pincontrol driver for BCM6318 Álvaro Fernández Rojas
2021-03-03 9:29 ` [PATCH v2 00/12] pinctrl: add BCM63XX pincontrol support Linus Walleij
2021-03-03 9:32 ` Álvaro Fernández Rojas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210302191613.29476-12-noltari@gmail.com \
--to=noltari@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=fazilyildiran@gmail.com \
--cc=jonas.gorski@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael@walle.cc \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).