From: "Alex Bennée" <alex.bennee@linaro.org>
To: linux-kernel@vger.kernel.org
Cc: maxim.uvarov@linaro.org, joakim.bech@linaro.org,
ilias.apalodimas@linaro.org, arnd@linaro.org,
ruchika.gupta@linaro.org, tomas.winkler@intel.com,
yang.huang@intel.com, bing.zhu@intel.com,
Matti.Moell@opensynergy.com, hmo@opensynergy.com,
linux-mmc@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-nvme@vger.kernel.org,
"Alex Bennée" <alex.bennee@linaro.org>,
"Ulf Hansson" <ulf.hansson@linaro.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Arnd Bergmann" <arnd.bergmann@linaro.org>
Subject: [RFC PATCH 1/5] rpmb: add Replay Protected Memory Block (RPMB) subsystem
Date: Wed, 3 Mar 2021 13:54:56 +0000 [thread overview]
Message-ID: <20210303135500.24673-2-alex.bennee@linaro.org> (raw)
In-Reply-To: <20210303135500.24673-1-alex.bennee@linaro.org>
A number of storage technologies support a specialised hardware
partition designed to be resistant to replay attacks. The underlying
HW protocols differ but the operations are common. The RPMB partition
cannot be accessed via standard block layer, but by a set of specific
commands: WRITE, READ, GET_WRITE_COUNTER, and PROGRAM_KEY. Such a
partition provides authenticated and replay protected access, hence
suitable as a secure storage.
The RPMB layer aims to provide in-kernel API for Trusted Execution
Environment (TEE) devices that are capable to securely compute block
frame signature. In case a TEE device wishes to store a replay
protected data, requests the storage device via RPMB layer to store
the data.
A TEE device driver can claim the RPMB interface, for example, via
class_interface_register(). The RPMB layer provides a series of
operations for interacting with the device.
* program_key - a one time operation for setting up a new device
* get_capacity - introspect the device capacity
* get_write_count - check the write counter
* write_blocks - write a series of blocks to the RPMB device
* read_blocks - read a series of blocks from the RPMB device
The detailed operation of implementing the access is left to the TEE
device driver itself.
[This is based-on Thomas Winkler's proposed API from:
https://lore.kernel.org/linux-mmc/1478548394-8184-2-git-send-email-tomas.winkler@intel.com/
The principle difference is the framing details and HW specific
bits (JDEC vs NVME frames) are left to the lower level TEE driver to
worry about. The eventual userspace ioctl interface will aim to be
similarly generic. This is an RFC to follow up on:
Subject: RPMB user space ABI
Date: Thu, 11 Feb 2021 14:07:00 +0000
Message-ID: <87mtwashi4.fsf@linaro.org>]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
---
MAINTAINERS | 7 +
drivers/char/Kconfig | 2 +
drivers/char/Makefile | 1 +
drivers/char/rpmb/Kconfig | 11 +
drivers/char/rpmb/Makefile | 7 +
drivers/char/rpmb/core.c | 429 +++++++++++++++++++++++++++++++++++++
include/linux/rpmb.h | 163 ++++++++++++++
7 files changed, 620 insertions(+)
create mode 100644 drivers/char/rpmb/Kconfig
create mode 100644 drivers/char/rpmb/Makefile
create mode 100644 drivers/char/rpmb/core.c
create mode 100644 include/linux/rpmb.h
diff --git a/MAINTAINERS b/MAINTAINERS
index bfc1b86e3e73..076f3983526c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15369,6 +15369,13 @@ T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
F: drivers/media/platform/sunxi/sun8i-rotate/
+RPMB SUBSYSTEM
+M: ?
+L: linux-kernel@vger.kernel.org
+S: Supported
+F: drivers/char/rpmb/*
+F: include/linux/rpmb.h
+
RTL2830 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index d229a2d0c017..a7834cc3e0ea 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -471,6 +471,8 @@ config ADI
and SSM (Silicon Secured Memory). Intended consumers of this
driver include crash and makedumpfile.
+source "drivers/char/rpmb/Kconfig"
+
endmenu
config RANDOM_TRUST_CPU
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index ffce287ef415..0eed6e21a7a7 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -47,3 +47,4 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o
obj-$(CONFIG_XILLYBUS) += xillybus/
obj-$(CONFIG_POWERNV_OP_PANEL) += powernv-op-panel.o
obj-$(CONFIG_ADI) += adi.o
+obj-$(CONFIG_RPMB) += rpmb/
diff --git a/drivers/char/rpmb/Kconfig b/drivers/char/rpmb/Kconfig
new file mode 100644
index 000000000000..431c2823cf70
--- /dev/null
+++ b/drivers/char/rpmb/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2015-2019, Intel Corporation.
+
+config RPMB
+ tristate "RPMB partition interface"
+ help
+ Unified RPMB partition interface for eMMC and UFS.
+ Provides interface for in kernel security controllers to
+ access RPMB partition.
+
+ If unsure, select N.
diff --git a/drivers/char/rpmb/Makefile b/drivers/char/rpmb/Makefile
new file mode 100644
index 000000000000..24d4752a9a53
--- /dev/null
+++ b/drivers/char/rpmb/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2015-2019, Intel Corporation.
+
+obj-$(CONFIG_RPMB) += rpmb.o
+rpmb-objs += core.o
+
+ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/char/rpmb/core.c b/drivers/char/rpmb/core.c
new file mode 100644
index 000000000000..a2e21c14986a
--- /dev/null
+++ b/drivers/char/rpmb/core.c
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright(c) 2015 - 2019 Intel Corporation. All rights reserved.
+ * Copyright(c) 2021 - Linaro Ltd.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include <linux/rpmb.h>
+
+static DEFINE_IDA(rpmb_ida);
+
+/**
+ * rpmb_dev_get() - increase rpmb device ref counter
+ * @rdev: rpmb device
+ */
+struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev)
+{
+ return get_device(&rdev->dev) ? rdev : NULL;
+}
+EXPORT_SYMBOL_GPL(rpmb_dev_get);
+
+/**
+ * rpmb_dev_put() - decrease rpmb device ref counter
+ * @rdev: rpmb device
+ */
+void rpmb_dev_put(struct rpmb_dev *rdev)
+{
+ put_device(&rdev->dev);
+}
+EXPORT_SYMBOL_GPL(rpmb_dev_put);
+
+/**
+ * rpmb_program_key() - program the RPMB access key
+ * @rdev: rpmb device
+ * @key: key data
+ * @keylen: length of key data
+ *
+ * A successful programming of the key implies it has been set by the
+ * driver and can be used.
+ *
+ * Return:
+ * * 0 on success
+ * * -EINVAL on wrong parameters
+ * * -EPERM key already programmed
+ * * -EOPNOTSUPP if device doesn't support the requested operation
+ * * < 0 if the operation fails
+ */
+int rpmb_program_key(struct rpmb_dev *rdev, key_serial_t keyid)
+{
+ int err;
+
+ if (!rdev || !keyid)
+ return -EINVAL;
+
+ mutex_lock(&rdev->lock);
+ err = -EOPNOTSUPP;
+ if (rdev->ops && rdev->ops->program_key) {
+ err = rdev->ops->program_key(rdev->dev.parent, rdev->target,
+ keyid);
+ }
+ mutex_unlock(&rdev->lock);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(rpmb_program_key);
+
+/**
+ * rpmb_get_capacity() - returns the capacity of the rpmb device
+ * @rdev: rpmb device
+ *
+ * Return:
+ * * capacity of the device in units of 128K, on success
+ * * -EINVAL on wrong parameters
+ * * -EOPNOTSUPP if device doesn't support the requested operation
+ * * < 0 if the operation fails
+ */
+int rpmb_get_capacity(struct rpmb_dev *rdev)
+{
+ int err;
+
+ if (!rdev)
+ return -EINVAL;
+
+ mutex_lock(&rdev->lock);
+ err = -EOPNOTSUPP;
+ if (rdev->ops && rdev->ops->get_capacity)
+ err = rdev->ops->get_capacity(rdev->dev.parent, rdev->target);
+ mutex_unlock(&rdev->lock);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(rpmb_get_capacity);
+
+/**
+ * rpmb_get_write_count() - returns the write counter of the rpmb device
+ * @rdev: rpmb device
+ *
+ * Return:
+ * * counter
+ * * -EINVAL on wrong parameters
+ * * -EOPNOTSUPP if device doesn't support the requested operation
+ * * < 0 if the operation fails
+ */
+int rpmb_get_write_count(struct rpmb_dev *rdev)
+{
+ int err;
+
+ if (!rdev)
+ return -EINVAL;
+
+ mutex_lock(&rdev->lock);
+ err = -EOPNOTSUPP;
+ if (rdev->ops && rdev->ops->get_write_count)
+ err = rdev->ops->get_write_count(rdev->dev.parent, rdev->target);
+ mutex_unlock(&rdev->lock);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(rpmb_get_write_count);
+
+/**
+ * rpmb_write_blocks() - write data to RPMB device
+ * @rdev: rpmb device
+ * @addr: block address (index of first block - 256B blocks)
+ * @count: number of 256B blosks
+ * @data: pointer to data to program
+ *
+ * Write a series of blocks to the RPMB device.
+ *
+ * Return:
+ * * 0 on success
+ * * -EINVAL on wrong parameters
+ * * -EACCESS no key set
+ * * -EOPNOTSUPP if device doesn't support the requested operation
+ * * < 0 if the operation fails
+ */
+int rpmb_write_blocks(struct rpmb_dev *rdev, key_serial_t keyid, int addr,
+ int count, u8 *data)
+{
+ int err;
+
+ if (!rdev || !count || !data)
+ return -EINVAL;
+
+ mutex_lock(&rdev->lock);
+ err = -EOPNOTSUPP;
+ if (rdev->ops && rdev->ops->write_blocks) {
+ err = rdev->ops->write_blocks(rdev->dev.parent, rdev->target, keyid,
+ addr, count, data);
+ }
+ mutex_unlock(&rdev->lock);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(rpmb_write_blocks);
+
+/**
+ * rpmb_read_blocks() - read data from RPMB device
+ * @rdev: rpmb device
+ * @addr: block address (index of first block - 256B blocks)
+ * @count: number of 256B blocks
+ * @data: pointer to data to read
+ *
+ * Read a series of one or more blocks from the RPMB device.
+ *
+ * Return:
+ * * 0 on success
+ * * -EINVAL on wrong parameters
+ * * -EACCESS no key set
+ * * -EOPNOTSUPP if device doesn't support the requested operation
+ * * < 0 if the operation fails
+ */
+int rpmb_read_blocks(struct rpmb_dev *rdev, int addr, int count, u8 *data)
+{
+ int err;
+
+ if (!rdev || !count || !data)
+ return -EINVAL;
+
+ mutex_lock(&rdev->lock);
+ err = -EOPNOTSUPP;
+ if (rdev->ops && rdev->ops->read_blocks) {
+ err = rdev->ops->read_blocks(rdev->dev.parent, rdev->target,
+ addr, count, data);
+ }
+ mutex_unlock(&rdev->lock);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(rpmb_read_blocks);
+
+
+static void rpmb_dev_release(struct device *dev)
+{
+ struct rpmb_dev *rdev = to_rpmb_dev(dev);
+
+ ida_simple_remove(&rpmb_ida, rdev->id);
+ kfree(rdev);
+}
+
+struct class rpmb_class = {
+ .name = "rpmb",
+ .owner = THIS_MODULE,
+ .dev_release = rpmb_dev_release,
+};
+EXPORT_SYMBOL(rpmb_class);
+
+/**
+ * rpmb_dev_find_device() - return first matching rpmb device
+ * @data: data for the match function
+ * @match: the matching function
+ *
+ * Return: matching rpmb device or NULL on failure
+ */
+static
+struct rpmb_dev *rpmb_dev_find_device(const void *data,
+ int (*match)(struct device *dev,
+ const void *data))
+{
+ struct device *dev;
+
+ dev = class_find_device(&rpmb_class, NULL, data, match);
+
+ return dev ? to_rpmb_dev(dev) : NULL;
+}
+
+struct device_with_target {
+ const struct device *dev;
+ u8 target;
+};
+
+static int match_by_parent(struct device *dev, const void *data)
+{
+ const struct device_with_target *d = data;
+ struct rpmb_dev *rdev = to_rpmb_dev(dev);
+
+ return (d->dev && dev->parent == d->dev && rdev->target == d->target);
+}
+
+/**
+ * rpmb_dev_find_by_device() - retrieve rpmb device from the parent device
+ * @parent: parent device of the rpmb device
+ * @target: RPMB target/region within the physical device
+ *
+ * Return: NULL if there is no rpmb device associated with the parent device
+ */
+struct rpmb_dev *rpmb_dev_find_by_device(struct device *parent, u8 target)
+{
+ struct device_with_target t;
+
+ if (!parent)
+ return NULL;
+
+ t.dev = parent;
+ t.target = target;
+
+ return rpmb_dev_find_device(&t, match_by_parent);
+}
+EXPORT_SYMBOL_GPL(rpmb_dev_find_by_device);
+
+/**
+ * rpmb_dev_unregister() - unregister RPMB partition from the RPMB subsystem
+ * @rdev: the rpmb device to unregister
+ * Return:
+ * * 0 on success
+ * * -EINVAL on wrong parameters
+ */
+int rpmb_dev_unregister(struct rpmb_dev *rdev)
+{
+ if (!rdev)
+ return -EINVAL;
+
+ mutex_lock(&rdev->lock);
+ device_del(&rdev->dev);
+ mutex_unlock(&rdev->lock);
+
+ rpmb_dev_put(rdev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rpmb_dev_unregister);
+
+/**
+ * rpmb_dev_unregister_by_device() - unregister RPMB partition
+ * from the RPMB subsystem
+ * @dev: the parent device of the rpmb device
+ * @target: RPMB target/region within the physical device
+ * Return:
+ * * 0 on success
+ * * -EINVAL on wrong parameters
+ * * -ENODEV if a device cannot be find.
+ */
+int rpmb_dev_unregister_by_device(struct device *dev, u8 target)
+{
+ struct rpmb_dev *rdev;
+
+ if (!dev)
+ return -EINVAL;
+
+ rdev = rpmb_dev_find_by_device(dev, target);
+ if (!rdev) {
+ dev_warn(dev, "no disk found %s\n", dev_name(dev->parent));
+ return -ENODEV;
+ }
+
+ rpmb_dev_put(rdev);
+
+ return rpmb_dev_unregister(rdev);
+}
+EXPORT_SYMBOL_GPL(rpmb_dev_unregister_by_device);
+
+/**
+ * rpmb_dev_get_drvdata() - driver data getter
+ * @rdev: rpmb device
+ *
+ * Return: driver private data
+ */
+void *rpmb_dev_get_drvdata(const struct rpmb_dev *rdev)
+{
+ return dev_get_drvdata(&rdev->dev);
+}
+EXPORT_SYMBOL_GPL(rpmb_dev_get_drvdata);
+
+/**
+ * rpmb_dev_set_drvdata() - driver data setter
+ * @rdev: rpmb device
+ * @data: data to store
+ */
+void rpmb_dev_set_drvdata(struct rpmb_dev *rdev, void *data)
+{
+ dev_set_drvdata(&rdev->dev, data);
+}
+EXPORT_SYMBOL_GPL(rpmb_dev_set_drvdata);
+
+/**
+ * rpmb_dev_register - register RPMB partition with the RPMB subsystem
+ * @dev: storage device of the rpmb device
+ * @target: RPMB target/region within the physical device
+ * @ops: device specific operations
+ *
+ * Return: a pointer to rpmb device
+ */
+struct rpmb_dev *rpmb_dev_register(struct device *dev, u8 target,
+ const struct rpmb_ops *ops)
+{
+ struct rpmb_dev *rdev;
+ int id;
+ int ret;
+
+ if (!dev || !ops)
+ return ERR_PTR(-EINVAL);
+
+ if (!ops->program_key)
+ return ERR_PTR(-EINVAL);
+
+ if (!ops->get_capacity)
+ return ERR_PTR(-EINVAL);
+
+ if (!ops->get_write_count)
+ return ERR_PTR(-EINVAL);
+
+ if (!ops->write_blocks)
+ return ERR_PTR(-EINVAL);
+
+ if (!ops->read_blocks)
+ return ERR_PTR(-EINVAL);
+
+ if (ops->type == RPMB_TYPE_ANY || ops->type > RPMB_TYPE_MAX)
+ return ERR_PTR(-EINVAL);
+
+ rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
+ if (!rdev)
+ return ERR_PTR(-ENOMEM);
+
+ id = ida_simple_get(&rpmb_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ ret = id;
+ goto exit;
+ }
+
+ mutex_init(&rdev->lock);
+ rdev->ops = ops;
+ rdev->id = id;
+ rdev->target = target;
+
+ dev_set_name(&rdev->dev, "rpmb%d", id);
+ rdev->dev.class = &rpmb_class;
+ rdev->dev.parent = dev;
+ ret = device_register(&rdev->dev);
+ if (ret)
+ goto exit;
+
+ dev_dbg(&rdev->dev, "registered device\n");
+
+ return rdev;
+
+exit:
+ if (id >= 0)
+ ida_simple_remove(&rpmb_ida, id);
+ kfree(rdev);
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(rpmb_dev_register);
+
+static int __init rpmb_init(void)
+{
+ ida_init(&rpmb_ida);
+ class_register(&rpmb_class);
+ return 0;
+}
+
+static void __exit rpmb_exit(void)
+{
+ class_unregister(&rpmb_class);
+ ida_destroy(&rpmb_ida);
+}
+
+subsys_initcall(rpmb_init);
+module_exit(rpmb_exit);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("RPMB class");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/rpmb.h b/include/linux/rpmb.h
new file mode 100644
index 000000000000..718ba7c91ecd
--- /dev/null
+++ b/include/linux/rpmb.h
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
+/*
+ * Copyright (C) 2015-2019 Intel Corp. All rights reserved
+ * Copyright (C) 2021 Linaro Ltd
+ */
+#ifndef __RPMB_H__
+#define __RPMB_H__
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/kref.h>
+#include <linux/key.h>
+
+/**
+ * struct rpmb_ops - RPMB ops to be implemented by underlying block device
+ *
+ * @program_key : program device key (once only op).
+ * @get_capacity : rpmb size in 128K units in for region/target.
+ * @get_write_count: return the device write counter
+ * @write_blocks : write blocks to RPMB device
+ * @read_blocks : read blocks from RPMB device
+ * @block_size : block size in half sectors (1 == 256B)
+ * @wr_cnt_max : maximal number of blocks that can be
+ * written in one access.
+ * @rd_cnt_max : maximal number of blocks that can be
+ * read in one access.
+ * @auth_method : rpmb_auth_method
+ * @dev_id : unique device identifier
+ * @dev_id_len : unique device identifier length
+ */
+struct rpmb_ops {
+ int (*program_key)(struct device *dev, u8 target, key_serial_t keyid);
+ int (*get_capacity)(struct device *dev, u8 target);
+ int (*get_write_count)(struct device *dev, u8 target);
+ int (*write_blocks)(struct device *dev, u8 target, key_serial_t keyid,
+ int addr, int count, u8 *data);
+ int (*read_blocks)(struct device *dev, u8 target,
+ int addr, int count, u8 *data);
+ u16 block_size;
+ u16 wr_cnt_max;
+ u16 rd_cnt_max;
+ u16 auth_method;
+ const u8 *dev_id;
+ size_t dev_id_len;
+};
+
+/**
+ * struct rpmb_dev - device which can support RPMB partition
+ *
+ * @lock : the device lock
+ * @dev : device
+ * @id : device id
+ * @target : RPMB target/region within the physical device
+ * @ops : operation exported by block layer
+ */
+struct rpmb_dev {
+ struct mutex lock; /* device serialization lock */
+ struct device dev;
+ int id;
+ u8 target;
+ const struct rpmb_ops *ops;
+};
+
+#define to_rpmb_dev(x) container_of((x), struct rpmb_dev, dev)
+
+#if IS_ENABLED(CONFIG_RPMB)
+struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev);
+void rpmb_dev_put(struct rpmb_dev *rdev);
+struct rpmb_dev *rpmb_dev_find_by_device(struct device *parent, u8 target);
+struct rpmb_dev *rpmb_dev_get_by_type(u32 type);
+struct rpmb_dev *rpmb_dev_register(struct device *dev, u8 target,
+ const struct rpmb_ops *ops);
+void *rpmb_dev_get_drvdata(const struct rpmb_dev *rdev);
+void rpmb_dev_set_drvdata(struct rpmb_dev *rdev, void *data);
+int rpmb_dev_unregister(struct rpmb_dev *rdev);
+int rpmb_dev_unregister_by_device(struct device *dev, u8 target);
+int rpmb_program_key(struct rpmb_dev *rdev, key_serial_t keyid);
+int rpmb_get_capacity(struct rpmb_dev *rdev);
+int rpmb_get_write_count(struct rpmb_dev *rdev);
+int rpmb_write_blocks(struct rpmb_dev *rdev, key_serial_t keyid,
+ int addr, int count, u8 *data);
+int rpmb_read_blocks(struct rpmb_dev *rdev, int addr, int count, u8 *data);
+
+#else
+static inline struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev)
+{
+ return NULL;
+}
+
+static inline void rpmb_dev_put(struct rpmb_dev *rdev) { }
+
+static inline struct rpmb_dev *rpmb_dev_find_by_device(struct device *parent,
+ u8 target)
+{
+ return NULL;
+}
+
+static inline
+struct rpmb_dev *rpmb_dev_get_by_type(enum rpmb_type type)
+{
+ return NULL;
+}
+
+static inline void *rpmb_dev_get_drvdata(const struct rpmb_dev *rdev)
+{
+ return NULL;
+}
+
+static inline void rpmb_dev_set_drvdata(struct rpmb_dev *rdev, void *data)
+{
+}
+
+static inline struct rpmb_dev *
+rpmb_dev_register(struct device *dev, u8 target, const struct rpmb_ops *ops)
+{
+ return NULL;
+}
+
+static inline int rpmb_dev_unregister(struct rpmb_dev *dev)
+{
+ return 0;
+}
+
+static inline int rpmb_dev_unregister_by_device(struct device *dev, u8 target)
+{
+ return 0;
+}
+
+static inline int rpmb_program_key(struct rpmb_dev *rdev, key_serial_t keyid)
+{
+ return 0;
+}
+
+static inline rpmb_set_key(struct rpmb_dev *rdev, u8 *key, int keylen);
+{
+ return 0;
+}
+
+static inline int rpmb_get_capacity(struct rpmb_dev *rdev)
+{
+ return 0;
+}
+
+static inline int rpmb_get_write_count(struct rpmb_dev *rdev)
+{
+ return 0;
+}
+
+static inline int rpmb_write_blocks(struct rpmb_dev *rdev, int addr, int count,
+ u8 *data)
+{
+ return 0;
+}
+
+static inline int rpmb_read_blocks(struct rpmb_dev *rdev, int addr, int count,
+ u8 *data)
+{
+ return 0;
+}
+
+#endif /* CONFIG_RPMB */
+
+#endif /* __RPMB_H__ */
--
2.20.1
next prev parent reply other threads:[~2021-03-03 18:11 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-03 13:54 [RFC PATCH 0/5] RPMB internal and user-space API + WIP virtio-rpmb frontend Alex Bennée
2021-03-03 13:54 ` Alex Bennée [this message]
2021-03-03 15:28 ` [RFC PATCH 1/5] rpmb: add Replay Protected Memory Block (RPMB) subsystem Ulf Hansson
2021-03-03 19:37 ` Alex Bennée
2021-03-04 20:56 ` Arnd Bergmann
2021-03-05 7:51 ` Joakim Bech
2021-03-05 8:44 ` Arnd Bergmann
2021-03-08 16:20 ` Linus Walleij
2021-03-09 21:09 ` Hector Martin
2021-03-10 5:14 ` Sumit Garg
2021-03-10 8:47 ` Hector Martin
2021-03-10 9:48 ` Linus Walleij
2021-03-10 13:52 ` Hector Martin
2021-03-11 0:36 ` Linus Walleij
2021-03-11 9:22 ` Hector Martin
2021-03-11 14:06 ` Linus Walleij
2021-03-11 20:02 ` Hector Martin
2021-03-12 9:22 ` Linus Walleij
2021-03-10 10:29 ` Sumit Garg
2021-03-11 0:49 ` Linus Walleij
2021-03-11 1:07 ` James Bottomley
2021-03-11 9:45 ` Hector Martin
2021-03-11 14:31 ` Linus Walleij
2021-03-11 20:29 ` Hector Martin
2021-03-11 20:57 ` Alex Bennée
2021-03-12 10:00 ` Linus Walleij
2021-03-12 9:47 ` Linus Walleij
2021-03-12 11:59 ` Sumit Garg
2021-03-12 12:08 ` Ilias Apalodimas
2021-03-09 17:12 ` David Howells
2021-03-10 4:54 ` Sumit Garg
2021-03-10 9:33 ` Linus Walleij
2021-03-03 13:54 ` [RFC PATCH 2/5] char: rpmb: provide a user space interface Alex Bennée
2021-03-04 7:01 ` Winkler, Tomas
2021-03-04 10:19 ` Alex Bennée
2021-03-04 10:34 ` Winkler, Tomas
2021-03-04 17:52 ` Alex Bennée
2021-03-04 19:54 ` Winkler, Tomas
2021-03-04 21:43 ` Arnd Bergmann
2021-03-05 6:31 ` Winkler, Tomas
2021-03-04 21:08 ` Arnd Bergmann
2021-03-03 13:54 ` [RFC PATCH 3/5] tools rpmb: add RPBM access tool Alex Bennée
2021-03-03 13:54 ` [RFC PATCH 4/5] rpmb: create virtio rpmb frontend driver [WIP] Alex Bennée
2021-03-03 13:55 ` [RFC PATCH 5/5] tools/rpmb: simple test sequence Alex Bennée
2021-03-09 13:27 ` [RFC PATCH 0/5] RPMB internal and user-space API + WIP virtio-rpmb frontend Avri Altman
2021-03-10 14:29 ` Alex Bennée
2021-03-11 13:45 ` Avri Altman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210303135500.24673-2-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=Matti.Moell@opensynergy.com \
--cc=arnd.bergmann@linaro.org \
--cc=arnd@linaro.org \
--cc=bing.zhu@intel.com \
--cc=hmo@opensynergy.com \
--cc=ilias.apalodimas@linaro.org \
--cc=joakim.bech@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-nvme@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=maxim.uvarov@linaro.org \
--cc=ruchika.gupta@linaro.org \
--cc=tomas.winkler@intel.com \
--cc=ulf.hansson@linaro.org \
--cc=yang.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).