From: "Álvaro Fernández Rojas" <noltari@gmail.com>
To: "Linus Walleij" <linus.walleij@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Michael Walle" <michael@walle.cc>,
"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
"Jonas Gorski" <jonas.gorski@gmail.com>,
"Álvaro Fernández Rojas" <noltari@gmail.com>,
"Necip Fazil Yildiran" <fazilyildiran@gmail.com>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 10/14] pinctrl: add a pincontrol driver for BCM6368
Date: Wed, 3 Mar 2021 15:23:06 +0100 [thread overview]
Message-ID: <20210303142310.6371-11-noltari@gmail.com> (raw)
In-Reply-To: <20210303142310.6371-1-noltari@gmail.com>
Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
GPIOs onto alternative functions. Not all are documented.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6368.c | 523 ++++++++++++++++++++++++++
3 files changed, 532 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 64dd2fc7c5d7..9906e2976022 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -62,6 +62,14 @@ config PINCTRL_BCM6362
help
Say Y here to enable the Broadcom BCM6362 GPIO driver.
+config PINCTRL_BCM6368
+ bool "Broadcom BCM6368 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6368 GPIO driver.
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index b9b09e5b914c..a1331bb9680e 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
+obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6368.c b/drivers/pinctrl/bcm/pinctrl-bcm6368.c
new file mode 100644
index 000000000000..15ce993198e5
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6368.c
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6368 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6368_NUM_GPIOS 38
+
+#define BCM6368_MODE_REG 0x18
+#define BCM6368_BASEMODE_REG 0x38
+#define BCM6368_BASEMODE_MASK 0x7
+#define BCM6368_BASEMODE_GPIO 0x0
+#define BCM6368_BASEMODE_UART1 0x1
+
+struct bcm6368_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm6368_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ unsigned dir_out:16;
+ unsigned basemode:3;
+};
+
+struct bcm6368_priv {
+ struct regmap_field *overlays;
+};
+
+#define BCM6368_BASEMODE_PIN(a, b) \
+ { \
+ .number = a, \
+ .name = b, \
+ .drv_data = (void *)true \
+ }
+
+static const struct pinctrl_pin_desc bcm6368_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ PINCTRL_PIN(27, "gpio27"),
+ PINCTRL_PIN(28, "gpio28"),
+ PINCTRL_PIN(29, "gpio29"),
+ BCM6368_BASEMODE_PIN(30, "gpio30"),
+ BCM6368_BASEMODE_PIN(31, "gpio31"),
+ BCM6368_BASEMODE_PIN(32, "gpio32"),
+ BCM6368_BASEMODE_PIN(33, "gpio33"),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 };
+
+#define BCM6368_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm6368_pingroup bcm6368_groups[] = {
+ BCM6368_GROUP(gpio0),
+ BCM6368_GROUP(gpio1),
+ BCM6368_GROUP(gpio2),
+ BCM6368_GROUP(gpio3),
+ BCM6368_GROUP(gpio4),
+ BCM6368_GROUP(gpio5),
+ BCM6368_GROUP(gpio6),
+ BCM6368_GROUP(gpio7),
+ BCM6368_GROUP(gpio8),
+ BCM6368_GROUP(gpio9),
+ BCM6368_GROUP(gpio10),
+ BCM6368_GROUP(gpio11),
+ BCM6368_GROUP(gpio12),
+ BCM6368_GROUP(gpio13),
+ BCM6368_GROUP(gpio14),
+ BCM6368_GROUP(gpio15),
+ BCM6368_GROUP(gpio16),
+ BCM6368_GROUP(gpio17),
+ BCM6368_GROUP(gpio18),
+ BCM6368_GROUP(gpio19),
+ BCM6368_GROUP(gpio20),
+ BCM6368_GROUP(gpio21),
+ BCM6368_GROUP(gpio22),
+ BCM6368_GROUP(gpio23),
+ BCM6368_GROUP(gpio24),
+ BCM6368_GROUP(gpio25),
+ BCM6368_GROUP(gpio26),
+ BCM6368_GROUP(gpio27),
+ BCM6368_GROUP(gpio28),
+ BCM6368_GROUP(gpio29),
+ BCM6368_GROUP(gpio30),
+ BCM6368_GROUP(gpio31),
+ BCM6368_GROUP(uart1_grp),
+};
+
+static const char * const analog_afe_0_groups[] = {
+ "gpio0",
+};
+
+static const char * const analog_afe_1_groups[] = {
+ "gpio1",
+};
+
+static const char * const sys_irq_groups[] = {
+ "gpio2",
+};
+
+static const char * const serial_led_data_groups[] = {
+ "gpio3",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio4",
+};
+
+static const char * const inet_led_groups[] = {
+ "gpio5",
+};
+
+static const char * const ephy0_led_groups[] = {
+ "gpio6",
+};
+
+static const char * const ephy1_led_groups[] = {
+ "gpio7",
+};
+
+static const char * const ephy2_led_groups[] = {
+ "gpio8",
+};
+
+static const char * const ephy3_led_groups[] = {
+ "gpio9",
+};
+
+static const char * const robosw_led_data_groups[] = {
+ "gpio10",
+};
+
+static const char * const robosw_led_clk_groups[] = {
+ "gpio11",
+};
+
+static const char * const robosw_led0_groups[] = {
+ "gpio12",
+};
+
+static const char * const robosw_led1_groups[] = {
+ "gpio13",
+};
+
+static const char * const usb_device_led_groups[] = {
+ "gpio14",
+};
+
+static const char * const pci_req1_groups[] = {
+ "gpio16",
+};
+
+static const char * const pci_gnt1_groups[] = {
+ "gpio17",
+};
+
+static const char * const pci_intb_groups[] = {
+ "gpio18",
+};
+
+static const char * const pci_req0_groups[] = {
+ "gpio19",
+};
+
+static const char * const pci_gnt0_groups[] = {
+ "gpio20",
+};
+
+static const char * const pcmcia_cd1_groups[] = {
+ "gpio22",
+};
+
+static const char * const pcmcia_cd2_groups[] = {
+ "gpio23",
+};
+
+static const char * const pcmcia_vs1_groups[] = {
+ "gpio24",
+};
+
+static const char * const pcmcia_vs2_groups[] = {
+ "gpio25",
+};
+
+static const char * const ebi_cs2_groups[] = {
+ "gpio26",
+};
+
+static const char * const ebi_cs3_groups[] = {
+ "gpio27",
+};
+
+static const char * const spi_cs2_groups[] = {
+ "gpio28",
+};
+
+static const char * const spi_cs3_groups[] = {
+ "gpio29",
+};
+
+static const char * const spi_cs4_groups[] = {
+ "gpio30",
+};
+
+static const char * const spi_cs5_groups[] = {
+ "gpio31",
+};
+
+static const char * const uart1_groups[] = {
+ "uart1_grp",
+};
+
+#define BCM6368_FUN(n, out) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .dir_out = out, \
+ }
+
+#define BCM6368_BASEMODE_FUN(n, val, out) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .basemode = BCM6368_BASEMODE_##val, \
+ .dir_out = out, \
+ }
+
+static const struct bcm6368_function bcm6368_funcs[] = {
+ BCM6368_FUN(analog_afe_0, 1),
+ BCM6368_FUN(analog_afe_1, 1),
+ BCM6368_FUN(sys_irq, 1),
+ BCM6368_FUN(serial_led_data, 1),
+ BCM6368_FUN(serial_led_clk, 1),
+ BCM6368_FUN(inet_led, 1),
+ BCM6368_FUN(ephy0_led, 1),
+ BCM6368_FUN(ephy1_led, 1),
+ BCM6368_FUN(ephy2_led, 1),
+ BCM6368_FUN(ephy3_led, 1),
+ BCM6368_FUN(robosw_led_data, 1),
+ BCM6368_FUN(robosw_led_clk, 1),
+ BCM6368_FUN(robosw_led0, 1),
+ BCM6368_FUN(robosw_led1, 1),
+ BCM6368_FUN(usb_device_led, 1),
+ BCM6368_FUN(pci_req1, 0),
+ BCM6368_FUN(pci_gnt1, 0),
+ BCM6368_FUN(pci_intb, 0),
+ BCM6368_FUN(pci_req0, 0),
+ BCM6368_FUN(pci_gnt0, 0),
+ BCM6368_FUN(pcmcia_cd1, 0),
+ BCM6368_FUN(pcmcia_cd2, 0),
+ BCM6368_FUN(pcmcia_vs1, 0),
+ BCM6368_FUN(pcmcia_vs2, 0),
+ BCM6368_FUN(ebi_cs2, 1),
+ BCM6368_FUN(ebi_cs3, 1),
+ BCM6368_FUN(spi_cs2, 1),
+ BCM6368_FUN(spi_cs3, 1),
+ BCM6368_FUN(spi_cs4, 1),
+ BCM6368_FUN(spi_cs5, 1),
+ BCM6368_BASEMODE_FUN(uart1, UART1, 0x6),
+};
+
+static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6368_groups);
+}
+
+static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6368_groups[group].name;
+}
+
+static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6368_groups[group].pins;
+ *num_pins = bcm6368_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6368_funcs);
+}
+
+static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6368_funcs[selector].name;
+}
+
+static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6368_funcs[selector].groups;
+ *num_groups = bcm6368_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct bcm6368_priv *priv = pc->driver_data;
+ const struct bcm6368_pingroup *pg = &bcm6368_groups[group];
+ const struct bcm6368_function *fun = &bcm6368_funcs[selector];
+ int i, pin;
+
+ if (fun->basemode) {
+ unsigned int mask = 0;
+
+ for (i = 0; i < pg->num_pins; i++) {
+ pin = pg->pins[i];
+ if (pin < BCM63XX_BANK_GPIOS)
+ mask |= BIT(pin);
+ }
+
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, mask, 0);
+ regmap_field_write(priv->overlays, fun->basemode);
+ } else {
+ pin = pg->pins[0];
+
+ if (bcm6368_pins[pin].drv_data)
+ regmap_field_write(priv->overlays,
+ BCM6368_BASEMODE_GPIO);
+
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(pin),
+ BIT(pin));
+ }
+
+ for (pin = 0; pin < pg->num_pins; pin++) {
+ struct pinctrl_gpio_range *range;
+ int hw_gpio = bcm6368_pins[pin].number;
+
+ range = pinctrl_find_gpio_range_from_pin(pctldev, hw_gpio);
+ if (range) {
+ struct gpio_chip *gc = range->gc;
+
+ if (fun->dir_out & BIT(pin))
+ gc->direction_output(gc, hw_gpio, 0);
+ else
+ gc->direction_input(gc, hw_gpio);
+ }
+ }
+
+ return 0;
+}
+
+static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct bcm6368_priv *priv = pc->driver_data;
+
+ if (offset >= BCM63XX_BANK_GPIOS && !bcm6368_pins[offset].drv_data)
+ return 0;
+
+ /* disable all functions using this pin */
+ if (offset < BCM63XX_BANK_GPIOS)
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(offset), 0);
+
+ if (bcm6368_pins[offset].drv_data)
+ regmap_field_write(priv->overlays, BCM6368_BASEMODE_GPIO);
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm6368_pctl_ops = {
+ .get_groups_count = bcm6368_pinctrl_get_group_count,
+ .get_group_name = bcm6368_pinctrl_get_group_name,
+ .get_group_pins = bcm6368_pinctrl_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .dt_free_map = pinctrl_utils_free_map,
+};
+
+static struct pinmux_ops bcm6368_pmx_ops = {
+ .get_functions_count = bcm6368_pinctrl_get_func_count,
+ .get_function_name = bcm6368_pinctrl_get_func_name,
+ .get_function_groups = bcm6368_pinctrl_get_groups,
+ .set_mux = bcm6368_pinctrl_set_mux,
+ .gpio_request_enable = bcm6368_gpio_request_enable,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6368_soc = {
+ .ngpios = BCM6368_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6368_pins),
+ .pctl_ops = &bcm6368_pctl_ops,
+ .pins = bcm6368_pins,
+ .pmx_ops = &bcm6368_pmx_ops,
+};
+
+static int bcm6368_pinctrl_probe(struct platform_device *pdev)
+{
+ struct reg_field overlays = REG_FIELD(BCM6368_BASEMODE_REG, 0, 15);
+ struct device *dev = &pdev->dev;
+ struct bcm63xx_pinctrl *pc;
+ struct bcm6368_priv *priv;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ err = bcm63xx_pinctrl_probe(pdev, &bcm6368_soc, (void *) priv);
+ if (err)
+ return err;
+
+ pc = platform_get_drvdata(pdev);
+
+ priv->overlays = devm_regmap_field_alloc(dev, pc->regs, overlays);
+ if (IS_ERR(priv->overlays))
+ return PTR_ERR(priv->overlays);
+
+ return 0;
+}
+
+static const struct of_device_id bcm6368_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6368-pinctrl", },
+ { },
+};
+
+static struct platform_driver bcm6368_pinctrl_driver = {
+ .probe = bcm6368_pinctrl_probe,
+ .driver = {
+ .name = "bcm6368-pinctrl",
+ .of_match_table = bcm6368_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6368_pinctrl_driver);
--
2.20.1
next prev parent reply other threads:[~2021-03-03 18:24 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-03 14:22 [PATCH v3 00/14] pinctrl: add BCM63XX pincontrol support Álvaro Fernández Rojas
2021-03-03 14:22 ` [PATCH v3 01/14] gpio: regmap: set gpio_chip of_node Álvaro Fernández Rojas
2021-03-03 15:27 ` Linus Walleij
2021-03-03 15:39 ` Michael Walle
2021-03-03 16:08 ` Michael Walle
2021-03-03 16:12 ` Álvaro Fernández Rojas
2021-03-04 8:13 ` Linus Walleij
2021-03-04 8:27 ` Álvaro Fernández Rojas
2021-03-03 14:22 ` [PATCH v3 02/14] pinctrl: bcm: add bcm63xx base code Álvaro Fernández Rojas
2021-03-03 14:22 ` [PATCH v3 03/14] Documentation: add BCM6328 pincontroller binding documentation Álvaro Fernández Rojas
2021-03-03 14:23 ` [PATCH v3 04/14] pinctrl: add a pincontrol driver for BCM6328 Álvaro Fernández Rojas
2021-03-03 14:23 ` [PATCH v3 05/14] Documentation: add BCM6358 pincontroller binding documentation Álvaro Fernández Rojas
2021-03-03 14:23 ` [PATCH v3 06/14] pinctrl: add a pincontrol driver for BCM6358 Álvaro Fernández Rojas
2021-03-03 14:23 ` [PATCH v3 07/14] Documentation: add BCM6362 pincontroller binding documentation Álvaro Fernández Rojas
2021-03-03 14:23 ` [PATCH v3 08/14] pinctrl: add a pincontrol driver for BCM6362 Álvaro Fernández Rojas
2021-03-03 14:23 ` [PATCH v3 09/14] Documentation: add BCM6368 pincontroller binding documentation Álvaro Fernández Rojas
2021-03-03 14:23 ` Álvaro Fernández Rojas [this message]
2021-03-03 14:23 ` [PATCH v3 11/14] Documentation: add BCM63268 " Álvaro Fernández Rojas
2021-03-03 14:23 ` [PATCH v3 12/14] pinctrl: add a pincontrol driver for BCM63268 Álvaro Fernández Rojas
2021-03-03 14:23 ` [PATCH v3 13/14] Documentation: add BCM6318 pincontroller binding documentation Álvaro Fernández Rojas
2021-03-03 14:23 ` [PATCH v3 14/14] pinctrl: add a pincontrol driver for BCM6318 Álvaro Fernández Rojas
2021-03-03 15:29 ` [PATCH v3 00/14] pinctrl: add BCM63XX pincontrol support Linus Walleij
2021-03-03 16:23 ` Álvaro Fernández Rojas
2021-03-04 0:13 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210303142310.6371-11-noltari@gmail.com \
--to=noltari@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=fazilyildiran@gmail.com \
--cc=jonas.gorski@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael@walle.cc \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).