[2/4] ARM: pxa: icontrol: Constify the software node
diff mbox series

Message ID 20210303152814.35070-3-heikki.krogerus@linux.intel.com
State Accepted
Commit 2df0c4a640c55c0eff7f97907b98ad6fdfedd226
Headers show
Series
  • spi: Adding support for software nodes
Related show

Commit Message

Heikki Krogerus March 3, 2021, 3:28 p.m. UTC
When device properties are supplied to the devices, in
reality a software fwnode that holds those properties is
created which is then assigned to the device. If the device
properties are constant the software node can also be
constant.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
---
 arch/arm/mach-pxa/icontrol.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

Patch
diff mbox series

diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 151e26ec06968..04a12523cdee0 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -74,13 +74,17 @@  static const struct property_entry mcp251x_properties[] = {
 	{}
 };
 
+static const struct software_node mcp251x_node = {
+	.properties = mcp251x_properties,
+};
+
 static struct spi_board_info mcp251x_board_info[] = {
 	{
 		.modalias        = "mcp2515",
 		.max_speed_hz    = 6500000,
 		.bus_num         = 3,
 		.chip_select     = 0,
-		.properties      = mcp251x_properties,
+		.swnode		 = &mcp251x_node,
 		.controller_data = &mcp251x_chip_info1,
 		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
 	},
@@ -89,7 +93,7 @@  static struct spi_board_info mcp251x_board_info[] = {
 		.max_speed_hz    = 6500000,
 		.bus_num         = 3,
 		.chip_select     = 1,
-		.properties      = mcp251x_properties,
+		.swnode		 = &mcp251x_node,
 		.controller_data = &mcp251x_chip_info2,
 		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
 	},
@@ -98,7 +102,7 @@  static struct spi_board_info mcp251x_board_info[] = {
 		.max_speed_hz    = 6500000,
 		.bus_num         = 4,
 		.chip_select     = 0,
-		.properties      = mcp251x_properties,
+		.swnode		 = &mcp251x_node,
 		.controller_data = &mcp251x_chip_info3,
 		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
 	},
@@ -107,7 +111,7 @@  static struct spi_board_info mcp251x_board_info[] = {
 		.max_speed_hz    = 6500000,
 		.bus_num         = 4,
 		.chip_select     = 1,
-		.properties      = mcp251x_properties,
+		.swnode		 = &mcp251x_node,
 		.controller_data = &mcp251x_chip_info4,
 		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
 	}