[3/4] ARM: pxa: zeus: Constify the software node
diff mbox series

Message ID 20210303152814.35070-4-heikki.krogerus@linux.intel.com
State Accepted
Commit d4272a7adf26c62c5afe86b6829712de519b4a26
Headers show
Series
  • spi: Adding support for software nodes
Related show

Commit Message

Heikki Krogerus March 3, 2021, 3:28 p.m. UTC
When device properties are supplied to the devices, in
reality a software fwnode that holds those properties is
created which is then assigned to the device. If the device
properties are constant the software node can also be
constant.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
---
 arch/arm/mach-pxa/zeus.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Patch
diff mbox series

diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index b27fc7ac9ceab..97700429633ee 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -433,10 +433,14 @@  static const struct property_entry mcp251x_properties[] = {
 	{}
 };
 
+static const struct software_node mcp251x_node = {
+	.properties = mcp251x_properties,
+};
+
 static struct spi_board_info zeus_spi_board_info[] = {
 	[0] = {
 		.modalias	= "mcp2515",
-		.properties	= mcp251x_properties,
+		.swnode		= &mcp251x_node,
 		.irq		= PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
 		.max_speed_hz	= 1*1000*1000,
 		.bus_num	= 3,