[v4,04/13] phy: ti: j721e-wiz: Get PHY properties only for "phy" or "link" subnode
diff mbox series

Message ID 20210304044122.15166-5-kishon@ti.com
State New, archived
Headers show
  • PHY: Add support in Sierra to use external clock
Related show

Commit Message

Kishon Vijay Abraham I March 4, 2021, 4:41 a.m. UTC
"serdes" node (child node of WIZ) can have sub-nodes for representing links
or it can have sub-nodes for representing the various clocks within the
serdes. Instead of trying to read "reg" from every child node used for
assigning "lane_phy_type", read only if the child node's name is "phy"
or "link" subnode.
Ideally all PHY dt nodes should have node name as "phy", however
existing devicetree used "link" as subnode. So in order to maintain old
DT compatibility get PHY properties for "phy" or "link" subnode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 drivers/phy/ti/phy-j721e-wiz.c | 4 ++++
 1 file changed, 4 insertions(+)

diff mbox series

diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
index 1bb73822f44a..659597645201 100644
--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -1102,6 +1102,10 @@  static int wiz_get_lane_phy_types(struct device *dev, struct wiz *wiz)
 		u32 reg, num_lanes = 1, phy_type = PHY_NONE;
 		int ret, i;
+		if (!(of_node_name_eq(subnode, "phy") ||
+		      of_node_name_eq(subnode, "link")))
+			continue;
 		ret = of_property_read_u32(subnode, "reg", &reg);
 		if (ret) {