From: Jagan Teki <jagan@amarulasolutions.com>
To: Rob Herring <robh+dt@kernel.org>,
Andrzej Hajda <a.hajda@samsung.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@siol.net>,
Sam Ravnborg <sam@ravnborg.org>,
Robert Foss <robert.foss@linaro.org>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-amarula@amarulasolutions.com,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v4 1/2] dt-bindings: display: bridge: Add Chipone ICN6211 bindings
Date: Thu, 4 Mar 2021 14:51:32 +0530 [thread overview]
Message-ID: <20210304092133.21717-1-jagan@amarulasolutions.com> (raw)
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produces RGB565, RGB666, RGB888 output format.
Add dt-bingings for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4:
- fixed Laurent comments
- added regulators
- replace reset with EN
- fixed warnings pointed by Robert
Changes for v3:
- updated to new dt-bindings style
.../display/bridge/chipone,icn6211.yaml | 99 +++++++++++++++++++
MAINTAINERS | 5 +
2 files changed, 104 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
new file mode 100644
index 000000000000..62c3bd4cb28d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
+
+maintainers:
+ - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+ ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.
+
+ It has a flexible configuration of MIPI DSI signal input and
+ produce RGB565, RGB666, RGB888 output format.
+
+properties:
+ compatible:
+ enum:
+ - chipone,icn6211
+
+ reg:
+ maxItems: 1
+ description: virtual channel number of a DSI peripheral
+
+ enable-gpios:
+ description: Bridge EN pin, chip is reset when EN is low.
+
+ vdd1-supply:
+ description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
+
+ vdd2-supply:
+ description: A 1.8V/2.5V/3.3V supply that power the PLL.
+
+ vdd3-supply:
+ description: A 1.8V/2.5V/3.3V supply that power the RGB output.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for MIPI DSI input
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for MIPI DPI output (panel or connector).
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@0 {
+ compatible = "chipone,icn6211";
+ reg = <0>;
+ enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ bridge_in_dsi: endpoint {
+ remote-endpoint = <&dsi_out_bridge>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ bridge_out_panel: endpoint {
+ remote-endpoint = <&panel_out_bridge>;
+ };
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9d241b832aae..065cbdc889d3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5529,6 +5529,11 @@ S: Maintained
F: Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
F: drivers/gpu/drm/panel/panel-boe-himax8279d.c
+DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+
DRM DRIVER FOR FARADAY TVE200 TV ENCODER
M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
--
2.25.1
next reply other threads:[~2021-03-04 9:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-04 9:21 Jagan Teki [this message]
2021-03-04 9:21 ` [PATCH v4 2/2] drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge Jagan Teki
2021-03-05 9:16 ` Robert Foss
2021-03-05 9:15 ` [PATCH v4 1/2] dt-bindings: display: bridge: Add Chipone ICN6211 bindings Robert Foss
2021-03-08 20:22 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210304092133.21717-1-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=robert.foss@linaro.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).