From: Philippe Schenker <philippe.schenker@toradex.com>
To: devicetree@vger.kernel.org
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] ARM: dts: colibri-imx6ull: Change drive strength for usdhc2
Date: Thu, 4 Mar 2021 10:31:39 +0100 [thread overview]
Message-ID: <20210304093139.471554-1-philippe.schenker@toradex.com> (raw)
The current setting reflects about 86 Ohms of source-impedance
on the SDIO signals where the WiFi board is hooked up. PCB traces are
routed with 50 Ohms impedance and there are no serial resistors on
those traces.
This commit changes the source-impedance to 52 Ohms to better match our
hardware design.
The impedances given in this commit message refer to 3.3V operation.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
arch/arm/boot/dts/imx6ull-colibri.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 4436556624d6..0cdbf7b6e728 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -522,12 +522,12 @@ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
pinctrl_usdhc2: usdhc2-grp {
fsl,pins = <
- MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059
- MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059
- MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059
- MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059
- MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059
- MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17059
+ MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17069
+ MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17069
+ MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17069
+ MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17069
+ MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17069
+ MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17069
MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10
>;
--
2.30.1
next reply other threads:[~2021-03-04 9:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-04 9:31 Philippe Schenker [this message]
2021-03-04 11:24 ` [PATCH] ARM: dts: colibri-imx6ull: Change drive strength for usdhc2 Fabio Estevam
2021-03-08 1:30 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210304093139.471554-1-philippe.schenker@toradex.com \
--to=philippe.schenker@toradex.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).