From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Linus Walleij <linus.walleij@linaro.org>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Thomas Gleixner <tglx@linutronix.de>,
"Rafael J. Wysocki" <rafael@kernel.org>
Subject: [PATCH v2 5/5] gpiolib: Reuse device's fwnode to create IRQ domain
Date: Thu, 4 Mar 2021 17:02:15 +0200 [thread overview]
Message-ID: <20210304150215.80652-6-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20210304150215.80652-1-andriy.shevchenko@linux.intel.com>
When IRQ domain is created for an ACPI case, the name of it becomes unknown-%d
since for now it utilizes of_node member only and doesn't consider fwnode case.
Convert IRQ domain creation code to utilize fwnode instead.
Before/After the change on Intel Galileo Gen 2 with two GPIO (IRQ) controllers:
unknown-1 ==> \_SB.PCI0.GIP0.GPO
unknown-2 ==> \_SB.NIO3
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/gpio/gpiolib.c | 28 ++++++++--------------------
1 file changed, 8 insertions(+), 20 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 6827736ba05c..254d59b088fe 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1457,9 +1457,9 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
struct lock_class_key *lock_key,
struct lock_class_key *request_key)
{
+ struct fwnode_handle *fwnode = dev_fwnode(&gc->gpiodev->dev);
struct irq_chip *irqchip = gc->irq.chip;
- const struct irq_domain_ops *ops = NULL;
- struct device_node *np;
+ const struct irq_domain_ops *ops;
unsigned int type;
unsigned int i;
@@ -1471,7 +1471,6 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
return -EINVAL;
}
- np = gc->gpiodev->dev.of_node;
type = gc->irq.default_type;
/*
@@ -1479,16 +1478,10 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
* used to configure the interrupts, as you may end up with
* conflicting triggers. Tell the user, and reset to NONE.
*/
- if (WARN(np && type != IRQ_TYPE_NONE,
- "%s: Ignoring %u default trigger\n", np->full_name, type))
+ if (WARN(fwnode && type != IRQ_TYPE_NONE,
+ "%pfw: Ignoring %u default trigger\n", fwnode, type))
type = IRQ_TYPE_NONE;
- if (has_acpi_companion(gc->parent) && type != IRQ_TYPE_NONE) {
- acpi_handle_warn(ACPI_HANDLE(gc->parent),
- "Ignoring %u default trigger\n", type);
- type = IRQ_TYPE_NONE;
- }
-
if (gc->to_irq)
chip_warn(gc, "to_irq is redefined in %s and you shouldn't rely on it\n", __func__);
@@ -1504,15 +1497,10 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
return ret;
} else {
/* Some drivers provide custom irqdomain ops */
- if (gc->irq.domain_ops)
- ops = gc->irq.domain_ops;
-
- if (!ops)
- ops = &gpiochip_domain_ops;
- gc->irq.domain = irq_domain_add_simple(np,
- gc->ngpio,
- gc->irq.first,
- ops, gc);
+ ops = gc->irq.domain_ops ?: &gpiochip_domain_ops;
+ gc->irq.domain = irq_domain_create_simple(fwnode, gc->ngpio,
+ gc->irq.first,
+ ops, gc);
if (!gc->irq.domain)
return -EINVAL;
}
--
2.30.1
next prev parent reply other threads:[~2021-03-04 15:06 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-04 15:02 [PATCH v2 0/5] gpiolib: switch to fwnode in the core Andy Shevchenko
2021-03-04 15:02 ` [PATCH v2 1/5] irqdomain: Introduce irq_domain_create_simple() API Andy Shevchenko
2021-03-04 18:29 ` Marc Zyngier
2021-03-04 20:13 ` Andy Shevchenko
2021-03-04 15:02 ` [PATCH v2 2/5] gpiolib: Unify the checks on fwnode type Andy Shevchenko
2021-03-04 15:47 ` Andy Shevchenko
2021-03-04 15:02 ` [PATCH v2 3/5] gpiolib: Move of_node operations to gpiolib-of and correct fwnode use Andy Shevchenko
2021-03-04 15:02 ` [PATCH v2 4/5] gpiolib: Introduce acpi_gpio_dev_init() and call it from core Andy Shevchenko
2021-03-04 15:02 ` Andy Shevchenko [this message]
2021-03-08 18:32 ` [PATCH v2 5/5] gpiolib: Reuse device's fwnode to create IRQ domain Rafael J. Wysocki
2021-03-08 18:52 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210304150215.80652-6-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=corbet@lwn.net \
--cc=linus.walleij@linaro.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=rafael@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).