linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Anup Patel <anup.patel@wdc.com>
To: Palmer Dabbelt <palmer@dabbelt.com>,
	Palmer Dabbelt <palmerdabbelt@google.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: Atish Patra <atish.patra@wdc.com>,
	Alistair Francis <Alistair.Francis@wdc.com>,
	Anup Patel <anup@brainfault.org>,
	linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	Anup Patel <anup.patel@wdc.com>
Subject: [PATCH v5] RISC-V: Use SBI SRST extension when available
Date: Fri,  5 Mar 2021 18:03:21 +0530	[thread overview]
Message-ID: <20210305123321.544483-1-anup.patel@wdc.com> (raw)

The SBI SRST extension provides a standard way to poweroff and
reboot the system irrespective to whether Linux RISC-V S-mode
is running natively (HS-mode) or inside Guest/VM (VS-mode).

The SBI SRST extension is available in latest SBI v0.3-draft
specification at: https://github.com/riscv/riscv-sbi-doc.

This patch extends Linux RISC-V SBI implementation to detect
and use SBI SRST extension.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
---
Changes since v4:
 - We should compare both major and minor number to ensure that
   SBI spec version is 0.3 (or above) for detecting SRST extension.
Changes since v3:
 - Rebased on Linux-5.12-rc1
 - Check SBI spec version when probing for SRST extension
Changes since v2:
 - Rebased on Linux-5.10-rc5
 - Updated patch as-per SBI SRST extension available in the latest
   SBI v0.3-draft specification
Changes since v1:
 - Updated patch as-per latest SBI SRST extension draft spec where
   we have only one SBI call with "reset_type" parameter
---
 arch/riscv/include/asm/sbi.h | 24 +++++++++++++++++++++
 arch/riscv/kernel/sbi.c      | 41 +++++++++++++++++++++++++++++++++---
 2 files changed, 62 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 99895d9c3bdd..79fa9f28b786 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -27,6 +27,7 @@ enum sbi_ext_id {
 	SBI_EXT_IPI = 0x735049,
 	SBI_EXT_RFENCE = 0x52464E43,
 	SBI_EXT_HSM = 0x48534D,
+	SBI_EXT_SRST = 0x53525354,
 };
 
 enum sbi_ext_base_fid {
@@ -70,6 +71,21 @@ enum sbi_hsm_hart_status {
 	SBI_HSM_HART_STATUS_STOP_PENDING,
 };
 
+enum sbi_ext_srst_fid {
+	SBI_EXT_SRST_RESET = 0,
+};
+
+enum sbi_srst_reset_type {
+	SBI_SRST_RESET_TYPE_SHUTDOWN = 0,
+	SBI_SRST_RESET_TYPE_COLD_REBOOT,
+	SBI_SRST_RESET_TYPE_WARM_REBOOT,
+};
+
+enum sbi_srst_reset_reason {
+	SBI_SRST_RESET_REASON_NONE = 0,
+	SBI_SRST_RESET_REASON_SYS_FAILURE,
+};
+
 #define SBI_SPEC_VERSION_DEFAULT	0x1
 #define SBI_SPEC_VERSION_MAJOR_SHIFT	24
 #define SBI_SPEC_VERSION_MAJOR_MASK	0x7f
@@ -145,6 +161,14 @@ static inline unsigned long sbi_minor_version(void)
 	return sbi_spec_version & SBI_SPEC_VERSION_MINOR_MASK;
 }
 
+/* Make SBI version */
+static inline unsigned long sbi_mk_version(unsigned long major,
+					    unsigned long minor)
+{
+	return ((major & SBI_SPEC_VERSION_MAJOR_MASK) <<
+		SBI_SPEC_VERSION_MAJOR_SHIFT) | minor;
+}
+
 int sbi_err_map_linux_errno(int err);
 #else /* CONFIG_RISCV_SBI */
 static inline int sbi_remote_fence_i(const unsigned long *hart_mask) { return -1; }
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index f4a7db3d309e..e94ea8053984 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -7,6 +7,7 @@
 
 #include <linux/init.h>
 #include <linux/pm.h>
+#include <linux/reboot.h>
 #include <asm/sbi.h>
 #include <asm/smp.h>
 
@@ -501,6 +502,32 @@ int sbi_remote_hfence_vvma_asid(const unsigned long *hart_mask,
 }
 EXPORT_SYMBOL(sbi_remote_hfence_vvma_asid);
 
+static void sbi_srst_reset(unsigned long type, unsigned long reason)
+{
+	sbi_ecall(SBI_EXT_SRST, SBI_EXT_SRST_RESET, type, reason,
+		  0, 0, 0, 0);
+	pr_warn("%s: type=0x%lx reason=0x%lx failed\n",
+		__func__, type, reason);
+}
+
+static int sbi_srst_reboot(struct notifier_block *this,
+			   unsigned long mode, void *cmd)
+{
+	sbi_srst_reset((mode == REBOOT_WARM || mode == REBOOT_SOFT) ?
+		       SBI_SRST_RESET_TYPE_WARM_REBOOT :
+		       SBI_SRST_RESET_TYPE_COLD_REBOOT,
+		       SBI_SRST_RESET_REASON_NONE);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block sbi_srst_reboot_nb;
+
+static void sbi_srst_power_off(void)
+{
+	sbi_srst_reset(SBI_SRST_RESET_TYPE_SHUTDOWN,
+		       SBI_SRST_RESET_REASON_NONE);
+}
+
 /**
  * sbi_probe_extension() - Check if an SBI extension ID is supported or not.
  * @extid: The extension ID to be probed.
@@ -577,22 +604,30 @@ void __init sbi_init(void)
 			sbi_get_firmware_id(), sbi_get_firmware_version());
 		if (sbi_probe_extension(SBI_EXT_TIME) > 0) {
 			__sbi_set_timer = __sbi_set_timer_v02;
-			pr_info("SBI v0.2 TIME extension detected\n");
+			pr_info("SBI TIME extension detected\n");
 		} else {
 			__sbi_set_timer = __sbi_set_timer_v01;
 		}
 		if (sbi_probe_extension(SBI_EXT_IPI) > 0) {
 			__sbi_send_ipi	= __sbi_send_ipi_v02;
-			pr_info("SBI v0.2 IPI extension detected\n");
+			pr_info("SBI IPI extension detected\n");
 		} else {
 			__sbi_send_ipi	= __sbi_send_ipi_v01;
 		}
 		if (sbi_probe_extension(SBI_EXT_RFENCE) > 0) {
 			__sbi_rfence	= __sbi_rfence_v02;
-			pr_info("SBI v0.2 RFENCE extension detected\n");
+			pr_info("SBI RFENCE extension detected\n");
 		} else {
 			__sbi_rfence	= __sbi_rfence_v01;
 		}
+		if ((sbi_spec_version >= sbi_mk_version(0, 3)) &&
+		    (sbi_probe_extension(SBI_EXT_SRST) > 0)) {
+			pr_info("SBI SRST extension detected\n");
+			pm_power_off = sbi_srst_power_off;
+			sbi_srst_reboot_nb.notifier_call = sbi_srst_reboot;
+			sbi_srst_reboot_nb.priority = 192;
+			register_restart_handler(&sbi_srst_reboot_nb);
+		}
 	} else {
 		__sbi_set_timer = __sbi_set_timer_v01;
 		__sbi_send_ipi	= __sbi_send_ipi_v01;
-- 
2.25.1


                 reply	other threads:[~2021-03-05 12:35 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210305123321.544483-1-anup.patel@wdc.com \
    --to=anup.patel@wdc.com \
    --cc=Alistair.Francis@wdc.com \
    --cc=anup@brainfault.org \
    --cc=aou@eecs.berkeley.edu \
    --cc=atish.patra@wdc.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=palmerdabbelt@google.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).