From: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
To: Marc Zyngier <maz@kernel.org>
Cc: <yj.chiang@mediatek.com>,
Mark-PK Tsai <mark-pk.tsai@mediatek.com>,
Daniel Palmer <daniel@thingy.jp>,
Thomas Gleixner <tglx@linutronix.de>,
Matthias Brugger <matthias.bgg@gmail.com>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>
Subject: [PATCH v3] irqchip/irq-mst: Support polarity configuration
Date: Mon, 8 Mar 2021 23:26:05 +0800 [thread overview]
Message-ID: <20210308152605.26122-1-mark-pk.tsai@mediatek.com> (raw)
Support irq polarity configuration and save and restore the config
when system suspend and resume.
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
---
drivers/irqchip/irq-mst-intc.c | 92 ++++++++++++++++++++++++++++++++--
1 file changed, 89 insertions(+), 3 deletions(-)
diff --git a/drivers/irqchip/irq-mst-intc.c b/drivers/irqchip/irq-mst-intc.c
index 143657b0cf28..50f3ef8bc610 100644
--- a/drivers/irqchip/irq-mst-intc.c
+++ b/drivers/irqchip/irq-mst-intc.c
@@ -13,15 +13,27 @@
#include <linux/of_irq.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
-#define INTC_MASK 0x0
-#define INTC_EOI 0x20
+#define MST_INTC_MAX_IRQS 64
+
+#define INTC_MASK 0x0
+#define INTC_REV_POLARITY 0x10
+#define INTC_EOI 0x20
+
+#ifdef CONFIG_PM_SLEEP
+static LIST_HEAD(mst_intc_list);
+#endif
struct mst_intc_chip_data {
raw_spinlock_t lock;
unsigned int irq_start, nr_irqs;
void __iomem *base;
bool no_eoi;
+#ifdef CONFIG_PM_SLEEP
+ struct list_head entry;
+ u16 saved_polarity_conf[DIV_ROUND_UP(MST_INTC_MAX_IRQS, 16)];
+#endif
};
static void mst_set_irq(struct irq_data *d, u32 offset)
@@ -78,6 +90,19 @@ static void mst_intc_eoi_irq(struct irq_data *d)
irq_chip_eoi_parent(d);
}
+static int mst_irq_chip_set_type(struct irq_data *data, unsigned int type)
+{
+ if (type != IRQ_TYPE_LEVEL_LOW && type != IRQ_TYPE_LEVEL_HIGH)
+ return -EINVAL;
+
+ if (type == IRQ_TYPE_LEVEL_LOW) {
+ mst_set_irq(data, INTC_REV_POLARITY);
+ type = IRQ_TYPE_LEVEL_HIGH;
+ }
+
+ return irq_chip_set_type_parent(data, type);
+}
+
static struct irq_chip mst_intc_chip = {
.name = "mst-intc",
.irq_mask = mst_intc_mask_irq,
@@ -87,13 +112,62 @@ static struct irq_chip mst_intc_chip = {
.irq_set_irqchip_state = irq_chip_set_parent_state,
.irq_set_affinity = irq_chip_set_affinity_parent,
.irq_set_vcpu_affinity = irq_chip_set_vcpu_affinity_parent,
- .irq_set_type = irq_chip_set_type_parent,
+ .irq_set_type = mst_irq_chip_set_type,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.flags = IRQCHIP_SET_TYPE_MASKED |
IRQCHIP_SKIP_SET_WAKE |
IRQCHIP_MASK_ON_SUSPEND,
};
+#ifdef CONFIG_PM_SLEEP
+static void mst_intc_polarity_save(struct mst_intc_chip_data *cd)
+{
+ int i;
+ void __iomem *addr = cd->base + INTC_REV_POLARITY;
+
+ for (i = 0; i < DIV_ROUND_UP(cd->nr_irqs, 16); i++)
+ cd->saved_polarity_conf[i] = readw_relaxed(addr + i * 4);
+}
+
+static void mst_intc_polarity_restore(struct mst_intc_chip_data *cd)
+{
+ int i;
+ void __iomem *addr = cd->base + INTC_REV_POLARITY;
+
+ for (i = 0; i < DIV_ROUND_UP(cd->nr_irqs, 16); i++)
+ writew_relaxed(cd->saved_polarity_conf[i], addr + i * 4);
+}
+
+static void mst_irq_resume(void)
+{
+ struct mst_intc_chip_data *cd;
+
+ list_for_each_entry(cd, &mst_intc_list, entry)
+ mst_intc_polarity_restore(cd);
+}
+
+static int mst_irq_suspend(void)
+{
+ struct mst_intc_chip_data *cd;
+
+ list_for_each_entry(cd, &mst_intc_list, entry)
+ mst_intc_polarity_save(cd);
+ return 0;
+}
+
+static struct syscore_ops mst_irq_syscore_ops = {
+ .suspend = mst_irq_suspend,
+ .resume = mst_irq_resume,
+};
+
+static int __init mst_irq_pm_init(void)
+{
+ register_syscore_ops(&mst_irq_syscore_ops);
+ return 0;
+}
+late_initcall(mst_irq_pm_init);
+#endif
+
static int mst_intc_domain_translate(struct irq_domain *d,
struct irq_fwspec *fwspec,
unsigned long *hwirq,
@@ -145,6 +219,14 @@ static int mst_intc_domain_alloc(struct irq_domain *domain, unsigned int virq,
parent_fwspec = *fwspec;
parent_fwspec.fwnode = domain->parent->fwnode;
parent_fwspec.param[1] = cd->irq_start + hwirq;
+
+ /*
+ * If the irq signal is active low, configure it to active high
+ * to meet GIC SPI spec in mst_irq_chip_set_type via REV_POLARITY bit
+ */
+ if (fwspec->param[2] == IRQ_TYPE_LEVEL_LOW)
+ parent_fwspec.param[2] = IRQ_TYPE_LEVEL_HIGH;
+
return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_fwspec);
}
@@ -193,6 +275,10 @@ static int __init mst_intc_of_init(struct device_node *dn,
return -ENOMEM;
}
+#ifdef CONFIG_PM_SLEEP
+ INIT_LIST_HEAD(&cd->entry);
+ list_add_tail(&cd->entry, &mst_intc_list);
+#endif
return 0;
}
--
2.18.0
reply other threads:[~2021-03-08 15:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210308152605.26122-1-mark-pk.tsai@mediatek.com \
--to=mark-pk.tsai@mediatek.com \
--cc=daniel@thingy.jp \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=maz@kernel.org \
--cc=tglx@linutronix.de \
--cc=yj.chiang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).